Product Code Database
Example Keywords: metroid prime -music $31
barcode-scavenger
   » » Wiki: Acetaldehyde
Tag Wiki 'Acetaldehyde'.
Tag

Acetaldehyde (IUPAC systematic name ethanal) is an with the , sometimes abbreviated as . It is a colorless liquid or gas, boiling near room temperature. It is one of the most important , occurring widely in nature and being produced on a large scale in industry. Acetaldehyde occurs naturally in coffee, bread, and ripe fruit, and is produced by plants. It is also produced by the partial oxidation of by the liver enzyme alcohol dehydrogenase and is a contributing cause of after alcohol consumption. Pathways of exposure include air, water, land, or groundwater, as well as drink and smoke. Consumption of inhibits acetaldehyde dehydrogenase, the enzyme responsible for the metabolism of acetaldehyde, thereby causing it to build up in the body.

The International Agency for Research on Cancer (IARC) has listed acetaldehyde as a Group 1 .List of IARC Group 1 carcinogens Acetaldehyde is "one of the most frequently found air toxins with cancer risk greater than one in a million".


History
Acetaldehyde was first observed by the Swedish pharmacist/chemist Carl Wilhelm Scheele (1774);Scheele, C. W. (1774) "Om Brunsten eller Magnesia nigra och dess egenskaper" (On brown-stone or black magnesia i.e., and its properties), Kungliga Svenska vetenskapsakademiens handlingar (Proceedings of the Royal Swedish Academy of Sciences), 35 : 89–116; 177–194. On pages 109–110, Scheele mentions that refluxing ("digesting") ethanol ( Alkohol vini) with manganese dioxide ( Brunsten) and either hydrochloric acid ( Spirtus salis) or sulfuric acid ( Spiritus Vitrioli) produces a smell like "Aether nitri" (ethanol treated with nitric acid). Later investigators realized that Scheele had produced acetaldehyde. it was then investigated by the French chemists Antoine François, comte de Fourcroy and Louis Nicolas Vauquelin (1800),Note:
  • Dabit, a pharmacist in Nantes, France, performed a series of experiments and concluded that acetaldehyde was formed when hydrogen in ethanol combined with oxygen in sulfuric acid to form water:
  • Fourcroy and Vauquelin stated that sulfuric acid was not consumed in the production of acetaldehyde: and the German chemists Johann Wolfgang Döbereiner (1821, 1822, 1832)See:
  • Döbereiner named the new "ether" "Sauerstoffäther" (oxygen-ether).
  • In this paper, Döbereiner made acetaldehyde by exposing ethanol vapor to air in the presence of platinum black. and Justus von Liebig (1835).
    (1997). 9780521524735, Cambridge University Press.

In 1835, Liebig named it "aldehyde", and in the middle of the century the name was altered to "acetaldehyde".


Production
In 2013, global production was about 438,000 tonnes. Before 1962, and were the major sources of acetaldehyde. Since then, ethylene is the dominant .

The main method of production is the oxidation of by the , which involves oxidation of ethene using a homogeneous palladium/copper catalyst system:

In the 1970s, the world capacity of the Wacker-Hoechst direct oxidation process exceeded two million tonnes annually.

Smaller quantities can be prepared by the partial of ethanol in an exothermic reaction. This process typically is conducted over a silver catalyst at about .

This method is one of the oldest routes for the industrial preparation of acetaldehyde.


Other methods

Hydration of acetylene
Prior to the and the availability of cheap ethylene, acetaldehyde was produced by the hydration of . This reaction is catalyzed by mercury(II) salts:
The mechanism involves the intermediacy of , which to acetaldehyde. The reaction is conducted at , and the acetaldehyde formed is separated from water and mercury and cooled to . In the process, iron(III) sulfate is used to reoxidize the mercury back to the mercury(II) salt. The resulting iron(II) sulfate is oxidized in a separate reactor with .

The enzyme Acetylene hydratase discovered in the strictly anaerobic bacterium Pelobacter acetylenicus can catalyze an analogous reaction without involving any compounds of mercury. However, it has thus far not been brought to any large-scale or commercial use.


Dehydrogenation of ethanol
Traditionally, acetaldehyde was produced by the partial of ethanol:
In this endothermic process, ethanol vapor is passed at 260–290 °C over a copper-based catalyst. The process was once attractive because of the value of the hydrogen coproduct,Eckert, Marc et al. (2007) "Acetaldehyde" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim but in modern times is not economically viable.


Hydroformylation of methanol
The of with catalysts like cobalt, nickel, or iron salts also produces acetaldehyde, although this process is of no industrial importance. Similarly noncompetitive, acetaldehyde arises from with modest selectivity.


Reactions

Tautomerization to vinyl alcohol
Like many other carbonyl compounds, acetaldehyde to give an (; IUPAC name: ethenol):

H298,g = +42.7 kJ/mol

The equilibrium constant is 6 at room temperature, thus that the relative amount of the enol form in a sample of acetaldehyde is very small. At room temperature, acetaldehyde () is more stable than () by 42.7 kJ/mol:Johnson, R.D. III "CCCBDB NIST Standard Reference Database". nist.gov Overall the keto-enol tautomerization occurs slowly but is catalyzed by acids.

Photo-induced keto-enol tautomerization is viable under or stratospheric conditions. This photo-tautomerization is relevant to the Earth's atmosphere, because vinyl alcohol is thought to be a precursor to in the atmosphere.


Addition and condensation reactions
Acetaldehyde is a common electrophile in organic synthesis.Sowin, T. J.; Melcher, L. M. (2004) "Acetaldehyde" in Encyclopedia of Reagents for Organic Synthesis (Ed: ), J. Wiley & Sons, New York. In addition reactions acetaldehyde is . It is used primarily as a source of the "" in and related condensation reactions.. Grignard reagents and organolithium compounds react with MeCHO to give derivatives. In one of the more spectacular addition reactions, in the presence of calcium hydroxide adds to MeCHO to give , and .

In a Strecker reaction, acetaldehyde condenses with and to give, after , the . Acetaldehyde can condense with to yield ; for example, with to give N-. These imines can be used to direct subsequent reactions like an aldol condensation.

It is also a building block in the synthesis of heterocyclic compounds. In one example, it converts, upon treatment with , to 5-ethyl-2-methylpyridine ("aldehyde-collidine").


Polymeric forms
Three molecules of acetaldehyde condense to form "", a cyclic trimer containing C-O single bonds. Similarly condensation of four molecules of acetaldehyde give the cyclic molecule . Paraldehyde can be produced in good yields, using a sulfuric acid catalyst. Metaldehyde is only obtained in a few percent yield and with cooling, often using HBr rather than as the catalyst. At in the presence of acid catalysts, polyacetaldehyde is produced. There are two of paraldehyde and four of metaldehyde.

The German chemist Valentin Hermann Weidenbusch (1821–1893) synthesized paraldehyde in 1848 by treating acetaldehyde with acid (either sulfuric or nitric acid) and cooling to . He found it quite remarkable that when paraldehyde was heated with a trace of the same acid, the reaction went the other way, recreating acetaldehyde.

Although is a polymeric form of acetaldehyde (), polyvinyl alcohol cannot be produced from acetaldehyde.


Acetal derivatives
Acetaldehyde forms a stable upon reaction with under conditions that favor dehydration. The product, , is formally named 1,1-diethoxyethane but is commonly referred to as "acetal". This can cause confusion as "acetal" is more commonly used to describe compounds with the RCH(OR')2 or RR'C(OR'')2 rather than referring to this specific compound — in fact, 1,1-diethoxyethane is also described as the diethyl acetal of acetaldehyde.


Precursor to vinylphosphonic acid
Acetaldehyde is a precursor to vinylphosphonic acid, which is used to make adhesives and membranes. The synthesis sequence begins with a reaction with phosphorus trichloride:


Biochemistry
In the , the , alcohol dehydrogenase oxidizes into acetaldehyde, which is then further oxidized into harmless by acetaldehyde dehydrogenase. These two oxidation reactions are coupled with the reduction of to . In the brain, the enzyme is primarily responsible for oxidizing ethanol to acetaldehyde, and alcohol dehydrogenase plays a minor role. The last steps of alcoholic fermentation in bacteria, plants, and involve the conversion of into acetaldehyde and by the enzyme pyruvate decarboxylase, followed by the conversion of acetaldehyde into ethanol. The latter reaction is again catalyzed by an alcohol dehydrogenase, now operating in the opposite direction.

Many East Asian people have an ALDH2 mutation which makes them significantly less efficient at oxidizing acetaldehyde. On consuming alcohol, their bodies tend to accumulate excessive amounts of acetaldehyde, causing the so-called alcohol flush reaction. They develop a characteristic flush on the face and body, along with "nausea, headache and general physical discomfort". Ingestion of the drug , which inhibits ALDH2, leads to a similar reaction .


Uses
Traditionally, acetaldehyde was mainly used as a precursor to acetic acid. This application has declined because acetic acid is produced more efficiently from methanol by the and . Acetaldehyde is an important precursor to derivatives, , and . Urea and acetaldehyde combine to give a useful . reacts with acetaldehyde to give ethylidene diacetate, a precursor to , which is used to produce polyvinyl acetate.

The global market for acetaldehyde is declining. Demand has been impacted by changes in the production of plasticizer alcohols, which has shifted because is less often produced from acetaldehyde, instead being generated by hydroformylation of . Likewise, , once produced from acetaldehyde, is made predominantly by the lower-cost methanol carbonylation process. "Acetaldehyde". ihs.com. The impact on demand has led to increase in prices and thus slowdown in the market.

+Consumption of acetaldehyde (103 t) in 2003
(* Included in others -glyoxal/glyoxalic acid, crotonaldehyde, lactic acid, n-butanol, 2-ethylhexanol)
321
80
83
23
14
98
766

is the largest consumer of acetaldehyde in the world, accounting for almost half of global consumption in 2012. Major use has been the production of acetic acid. Other uses such as and pentaerythritol are expected to grow faster than acetic acid, but the volumes are not large enough to offset the decline in acetic acid. As a consequence, overall acetaldehyde consumption in may grow slightly at 1.6% per year through 2018. Western Europe is the second-largest consumer of acetaldehyde worldwide, accounting for 20% of world consumption in 2012. As with China, the Western European acetaldehyde market is expected to increase only very slightly at 1% per year during 2012–2018. However, could emerge as a potential consumer for acetaldehyde in the next five years due to newfound use in commercial production of . The supply of butadiene has been volatile in Japan and the rest of Asia. This should provide the much needed boost to the flat market, as of 2013.Research and Markets ltd. "Acetaldehyde — Global Business Strategic Report".


Safety

Exposure limits
The threshold limit value is 25ppm (STEL/ceiling value) and the MAK (Maximum Workplace Concentration) is 50 ppm. At 50 ppm acetaldehyde, no irritation or local tissue damage in the is observed. When taken up by the organism, acetaldehyde is metabolized rapidly in the liver to acetic acid. Only a small proportion is exhaled unchanged. After intravenous injection, the half-life in the blood is approximately 90 seconds.


Dangers

Toxicity
Many serious cases of acute intoxication have been recorded. Acetaldehyde naturally breaks down in the human body.


Irritation
Acetaldehyde is an irritant of the skin, eyes, mucous membranes, throat, and respiratory tract. This occurs at concentrations as low as 1000 ppm. Symptoms of exposure to this compound include , , and . These symptoms may not happen immediately. The threshold for acetaldehyde in air is in the range between 0.07 and 0.25 ppm. At such concentrations, the of acetaldehyde is apparent. irritations have been observed after a 15-minute exposure to concentrations of 25 and 50 ppm, but transient conjunctivitis and irritation of the respiratory tract have been reported after exposure to 200 ppm acetaldehyde for 15 minutes.


Carcinogenicity
Acetaldehyde is in humans. Chemical Summary For Acetaldehyde, US Environmental Protection Agency In 1988 the International Agency for Research on Cancer stated, "There is sufficient evidence for the carcinogenicity of acetaldehyde (the major metabolite of ethanol) in experimental animals."
(1988). 9789283212447, World Health Organization, International Agency for Research on Cancer. .
p3
In October 2009 the International Agency for Research on Cancer updated the classification of acetaldehyde stating that acetaldehyde included in and generated from alcoholic beverages is a Group I human carcinogen. In addition, acetaldehyde is damaging to and causes abnormal muscle development as it binds to proteins.


DNA crosslinks
Acetaldehyde induces DNA interstrand crosslinks, a form of DNA damage. These can be repaired by either of two replication-coupled DNA repair pathways. The first is referred to as the FA pathway, because it employs gene products defective in Fanconi's anemia patients. This repair pathway results in increased mutation frequency and altered mutational spectrum. The second repair pathway requires replication fork convergence, breakage of the acetaldehyde crosslink, translesion synthesis by a Y-family DNA polymerase and homologous recombination.


Aggravating factors

Alzheimer's disease
People with a genetic deficiency for the enzyme responsible for the conversion of acetaldehyde into may have a greater risk of Alzheimer's disease. "These results indicate that the ALDH2 deficiency is a risk factor for LOAD late-onset ..."


Genetic conditions
A study of 818 heavy drinkers found that those exposed to more acetaldehyde than normal through a genetic variant of the gene encoding for ADH1C, ADH1C*1, are at greater risk of developing cancers of the upper gastrointestinal tract and liver.


Disulfiram
The drug (Antabuse) inhibits acetaldehyde dehydrogenase, an enzyme that oxidizes the compound into acetic acid. Metabolism of ethanol forms acetaldehyde before acetaldehyde dehydrogenase forms acetic acid, but with the enzyme inhibited, acetaldehyde accumulates. If one consumes ethanol while taking disulfiram, the hangover effect of ethanol is felt more rapidly and intensely (disulfiram-alcohol reaction). As such, disulfiram is sometimes used as a deterrent for alcoholics wishing to stay sober.


Sources of exposure

Indoor air
Acetaldehyde is a potential contaminant in workplace, indoors, and ambient environments. Moreover, the majority of humans spend more than 90% of their time in indoor environments, increasing any exposure and the risk to human health.
(2025). 9780074455494, McGraw-Hill. .

In a study in , the mean indoor concentration of acetaldehydes measured in 16 homes was approximately seven times higher than the outside acetaldehyde concentration. The had a mean of 18.1±17.5 μg m−3 and the was 18.2±16.9 μg m−3, whereas the outdoor air had a mean concentration of 2.3±2.6 μg m−3.

It has been concluded that volatile organic compounds (VOC) such as benzene, formaldehyde, acetaldehyde, toluene, and have to be considered priority with respect to their health effects. It has been pointed that in renovated or completely new buildings, the VOCs concentration levels are often several orders of magnitude higher. The main sources of acetaldehydes in homes include building materials, laminate, PVC flooring, varnished wood flooring, and varnished cork/pine flooring (found in the varnish, not the wood). It is also found in plastics, oil-based and water-based paints, in composite wood ceilings, particle-board, plywood, treated pine wood, and laminated chipboard furniture.


Outdoor air
The use of acetaldehyde is widespread in different industries, and it may be released into waste water or the air during production, use, transportation and storage. Sources of acetaldehyde include fuel combustion emissions from stationary internal combustion engines and power plants that burn fossil fuels, wood, or trash, oil and gas extraction, refineries, cement kilns, lumber and wood mills and paper mills. Acetaldehyde is also present in automobile and . As a result, acetaldehyde is "one of the most frequently found air toxics with cancer risk greater than one in a million".


Tobacco smoke
Natural tobacco , including , have been shown to be the primary precursors making acetaldehyde a significant constituent of . It has been demonstrated to have a effect with in rodent studies of . "NIDA — Publications — NIDA Notes — Vol. 20, No. 3" . drugabuse.gov. Nicotine's addictive hold increases when combined with other tobacco smoke chemicals, UCI study finds. University of California. 2004-10-28 Acetaldehyde is also the most abundant carcinogen in tobacco smoke; it is dissolved into the while smoking.


Cannabis smoke
Acetaldehyde has been found in . This finding emerged through the use of new chemical techniques that demonstrated the acetaldehyde present was causing DNA damage in laboratory settings.


Alcohol consumption
Many produce acetaldehyde from ethanol, but they have a lower capacity to eliminate the acetaldehyde, which can lead to the accumulation of acetaldehyde in saliva, stomach acid, and intestinal contents. food and many alcoholic beverages can also contain significant amounts of acetaldehyde. Acetaldehyde, derived from mucosal or microbial oxidation of ethanol, tobacco smoke, and diet, appears to act as a cumulative carcinogen in the upper digestive tract of humans. According to European Commission's Scientific Committee on Consumer Safety's (SCCS) "Opinion on Acetaldehyde" (2012) the products special risk limit is 5 mg/L and acetaldehyde should not be used in products. Scientific Committee on Consumer Safety SCCS OPINION ON Acetaldehyde. European Commission. 18 September 2012


Plastics
Acetaldehyde can be produced by the photo-oxidation of polyethylene terephthalate (PET), via a .

Although the levels produced by this process are minute acetaldehyde has an exceedingly low taste/ of around 20–40 ppb and can cause an off-taste in bottled water. The level at which an average consumer could detect acetaldehyde is still considerably lower than any toxicity.


Candida overgrowth
The yeast in patients with potentially carcinogenic oral diseases has been shown to produce acetaldehyde in quantities sufficient to cause problems.


See also


External links

Page 1 of 1
1
Page 1 of 1
1

Account

Social:
Pages:  ..   .. 
Items:  .. 

Navigation

General: Atom Feed Atom Feed  .. 
Help:  ..   .. 
Category:  ..   .. 
Media:  ..   .. 
Posts:  ..   ..   .. 

Statistics

Page:  .. 
Summary:  .. 
1 Tags
10/10 Page Rank
5 Page Refs
2s Time