Enzyme

 ( Featured Article ) 

Enzymes () are that act as biological by accelerating chemical reactions. The molecules upon which enzymes may act are called substrates, and the enzyme converts the substrates into different molecules known as products. Almost all metabolism in the cell need enzyme catalysis in order to occur at rates fast enough to sustain life.

Metabolic pathways depend upon enzymes to catalyze individual steps. The study of enzymes is called enzymology and the field of pseudoenzyme recognizes that during evolution, some enzymes have lost the ability to carry out biological catalysis, which is often reflected in their amino acid sequences and unusual 'pseudocatalytic' properties.

Enzymes are known to catalyze more than 5,000 biochemical reaction types.

Other biocatalysts are Ribozyme, also called . They are sometimes described as a type of enzyme rather than being like an enzyme, but even in the decades since ribozymes' discovery in 1980-1982, the word enzyme alone often means the protein type specifically (as is used in this article).

An enzyme's specificity comes from its unique three-dimensional structure.

Like all catalysts, enzymes increase the reaction rate by lowering its activation energy. Some enzymes can make their conversion of substrate to product occur many millions of times faster. An extreme example is orotidine 5'-phosphate decarboxylase, which allows a reaction that would otherwise take millions of years to occur in milliseconds. Chemically, enzymes are like any catalyst and are not consumed in chemical reactions, nor do they alter the equilibrium of a reaction. Enzymes differ from most other catalysts by being much more specific. Enzyme activity can be affected by other molecules: Enzyme inhibitor are molecules that decrease enzyme activity, and enzyme activator are molecules that increase activity. Many therapeutic and are enzyme inhibitors. An enzyme's activity decreases markedly outside its optimal temperature and pH, and many enzymes are (permanently) denatured when exposed to excessive heat, losing their structure and catalytic properties.

Some enzymes are used commercially, for example, in the synthesis of . Some household products use enzymes to speed up chemical reactions: enzymes in biological washing powders break down protein, starch or fat stains on clothes, and enzymes in papain break down proteins into smaller molecules, making the meat easier to chew.

---

Etymology and history By the late 17th and early 18th centuries, the digestion of meat by stomach secretions and the conversion of starch to by plant extracts and saliva were known but the mechanisms by which these occurred had not been identified.

French chemist Anselme Payen was the first to discover an enzyme, diastase, in 1833. A few decades later, when studying the fermentation of sugar to ethanol by yeast, Louis Pasteur concluded that this fermentation was caused by a vital force contained within the yeast cells called "ferments", which were thought to function only within living organisms. He wrote that "alcoholic fermentation is an act correlated with the life and organization of the yeast cells, not with the death or putrefaction of the cells."

In 1877, German physiologist Wilhelm Kühne (1837–1900) first used the term , which comes , to describe this process.Kühne coined the word "enzyme" in: Relevant passage on page 190: "Um Missverständnissen vorzubeugen und lästige Umschreibungen zu vermeiden schlägt Vortragender vor, die ungeformten oder nicht organisirten Fermente, deren Wirkung ohne Anwesenheit von Organismen und ausserhalb derselben erfolgen kann, als Enzyme zu bezeichnen." (Translation: In order to obviate misunderstandings and avoid cumbersome periphrases, the suggests designating as "enzymes" the unformed or not organized ferments, whose action can occur without the presence of organisms and outside of the same.) The word enzyme was used later to refer to nonliving substances such as pepsin, and the word ferment was used to refer to chemical activity produced by living organisms.

Eduard Buchner submitted his first paper on the study of yeast extracts in 1897. In a series of experiments at the University of Berlin, he found that sugar was fermented by yeast extracts even when there were no living yeast cells in the mixture. He named the enzyme that brought about the fermentation of sucrose "zymase". In 1907, he received the Nobel Prize in Chemistry for "his discovery of cell-free fermentation". Following Buchner's example, enzymes are usually named according to the reaction they carry out: the suffix -ase is combined with the name of the substrate (e.g., lactase is the enzyme that cleaves lactose) or to the type of reaction (e.g., DNA polymerase forms DNA polymers).The naming of enzymes by adding the suffix "-ase" to the substrate on which the enzyme acts, has been traced to French scientist Émile Duclaux (1840–1904), who intended to honor the discoverers of diastase – the first enzyme to be isolated – by introducing this practice in his book See Chapter 1, especially page 9.

The biochemical identity of enzymes was still unknown in the early 1900s. Many scientists observed that enzymatic activity was associated with proteins, but others (such as Nobel laureate Richard Willstätter) argued that proteins were merely carriers for the true enzymes and that proteins per se were incapable of catalysis. quoted in In 1926, James B. Sumner showed that the enzyme urease was a pure protein and crystallized it; he did likewise for the enzyme catalase in 1937. The conclusion that pure proteins can be enzymes was definitively demonstrated by John Howard Northrop and Wendell Meredith Stanley, who worked on the digestive enzymes pepsin (1930), trypsin and chymotrypsin. These three scientists were awarded the 1946 Nobel Prize in Chemistry.

The discovery that enzymes could be crystallized eventually allowed their structures to be solved by x-ray crystallography. This was first done for lysozyme, an enzyme found in tears, saliva and that digests the coating of some bacteria; the structure was solved by a group led by David Chilton Phillips and published in 1965. This high-resolution structure of lysozyme marked the beginning of the field of structural biology and the effort to understand how enzymes work at an atomic level of detail.

---

Classification and nomenclature Enzymes can be classified by two main criteria: either amino acid sequence similarity (and thus evolutionary relationship) or enzymatic activity.

Enzyme activity. An enzyme's name is often derived from its substrate or the chemical reaction it catalyzes, with the word ending in -ase. Examples are lactase, alcohol dehydrogenase and DNA polymerase. Different enzymes that catalyze the same chemical reaction are called .

The International Union of Biochemistry and Molecular Biology have developed a nomenclature for enzymes, the EC numbers (for "Enzyme Commission"). Each enzyme is described by "EC" followed by a sequence of four numbers which represent the hierarchy of enzymatic activity (from very general to very specific). That is, the first number broadly classifies the enzyme based on its mechanism while the other digits add more and more specificity.

The top-level classification is:

• EC 1, : catalyze oxidation/reduction reactions
• EC 2, : transfer a functional group ( e.g. a methyl or phosphate group)
• EC 3, : catalyze the hydrolysis of various bonds
• EC 4, : cleave various bonds by means other than hydrolysis and oxidation
• EC 5, : catalyze changes within a single molecule
• EC 6, : join two molecules with .
• EC 7, : catalyze the movement of ions or molecules across membranes, or their separation within membranes.

These sections are subdivided by other features such as the substrate, products, and chemical mechanism. An enzyme is fully specified by four numerical designations. For example, hexokinase (EC 2.7.1.1) is a transferase (EC 2) that adds a phosphate group (EC 2.7) to a hexose sugar, a molecule containing an alcohol group (EC 2.7.1).

Sequence similarity. EC categories do not reflect sequence similarity. For instance, two ligases of the same EC number that catalyze exactly the same reaction can have completely different sequences. Independent of their function, enzymes, like any other proteins, have been classified by their sequence similarity into numerous families. These families have been documented in dozens of different protein and protein family databases such as Pfam.

Non-homologous isofunctional enzymes. Unrelated enzymes that have the same enzymatic activity have been called non-homologous isofunctional enzymes. Horizontal gene transfer may spread these genes to unrelated species, especially bacteria where they can replace endogenous genes of the same function, leading to hon-homologous gene displacement.

---

Structure Enzymes are generally , acting alone or in larger protein complex. The sequence of the amino acids specifies the structure which in turn determines the catalytic activity of the enzyme. Although structure determines function, a novel enzymatic activity cannot yet be predicted from structure alone. Enzyme structures unfold (denature) when heated or exposed to chemical denaturants and this disruption to the structure typically causes a loss of activity.

(2024). 9781405119221, New Science. ISBN 9781405119221

Enzyme denaturation is normally linked to temperatures above a species' normal level; as a result, enzymes from bacteria living in volcanic environments such as are prized by industrial users for their ability to function at high temperatures, allowing enzyme-catalysed reactions to be operated at a very high rate.

Enzymes are usually much larger than their substrates. Sizes range from just 62 amino acid residues, for the monomer of 4-oxalocrotonate tautomerase, to over 2,500 residues in the animal fatty acid synthase. Only a small portion of their structure (around 2–4 amino acids) is directly involved in catalysis: the catalytic site. This catalytic site is located next to one or more where residues orient the substrates. The catalytic site and binding site together compose the enzyme's active site. The remaining majority of the enzyme structure serves to maintain the precise orientation and dynamics of the active site.

In some enzymes, no amino acids are directly involved in catalysis; instead, the enzyme contains sites to bind and orient catalytic cofactors. Enzyme structures may also contain where the binding of a small molecule causes a conformational change that increases or decreases activity.

A small number of Ribonucleic acid-based biological catalysts called exist, which again can act alone or in complex with proteins. The most common of these is the ribosome which is a complex of protein and catalytic RNA components.

---

Mechanism

---

Substrate binding Enzymes must bind their substrates before they can catalyse any chemical reaction. Enzymes are usually very specific as to what substrates they bind and then the chemical reaction catalysed. Specificity is achieved by binding pockets with complementary shape, charge and hydrophilic/hydrophobic characteristics to the substrates. Enzymes can therefore distinguish between very similar substrate molecules to be chemoselectivity, regioselectivity and stereospecific.

Some of the enzymes showing the highest specificity and accuracy are involved in the copying and Gene expression of the genome. Some of these enzymes have "proof-reading" mechanisms. Here, an enzyme such as DNA polymerase catalyzes a reaction in a first step and then checks that the product is correct in a second step. This two-step process results in average error rates of less than 1 error in 100 million reactions in high-fidelity mammalian polymerases. Similar proofreading mechanisms are also found in RNA polymerase, aminoacyl tRNA synthetases and .

Conversely, some enzymes display enzyme promiscuity, having broad specificity and acting on a range of different physiologically relevant substrates. Many enzymes possess small side activities which arose fortuitously (i.e. neutrally), which may be the starting point for the evolutionary selection of a new function.

---

"Lock and key" model To explain the observed specificity of enzymes, in 1894 Emil Fischer proposed that both the enzyme and the substrate possess specific complementary geometric shapes that fit exactly into one another. From page 2992: "Um ein Bild zu gebrauchen, will ich sagen, dass Enzym und Glucosid wie Schloss und Schlüssel zu einander passen müssen, um eine chemische Wirkung auf einander ausüben zu können." (To use an image, I will say that an enzyme and a glucoside i.e., must fit like a lock and key, in order to be able to exert a chemical effect on each other.) This is often referred to as "the lock and key" model. This early model explains enzyme specificity, but fails to explain the stabilization of the transition state that enzymes achieve.

Cooper GM (2024). 9780878931064, ASM Press. . ISBN 9780878931064

---

Induced fit model

In 1958, Daniel Koshland suggested a modification to the lock and key model: since enzymes are rather flexible structures, the active site is continuously reshaped by interactions with the substrate as the substrate interacts with the enzyme. As a result, the substrate does not simply bind to a rigid active site; the amino acid Side chain that make up the active site are molded into the precise positions that enable the enzyme to perform its catalytic function. In some cases, such as glycosidases, the substrate molecule also changes shape slightly as it enters the active site. The active site continues to change until the substrate is completely bound, at which point the final shape and charge distribution is determined.

(2024). 9780470003794, John Wiley & Sons, Inc.. ISBN 9780470003794

Induced fit may enhance the fidelity of molecular recognition in the presence of competition and noise via the conformational proofreading mechanism.

---

Catalysis

Enzymes can accelerate reactions in several ways, all of which lower the activation energy (ΔG^‡, Gibbs free energy)

Fersht A (1985). 9780716716150, W.H. Freeman. ISBN 9780716716150

1. By stabilizing the transition state:
• Creating an environment with a charge distribution complementary to that of the transition state to lower its energy
2. By providing an alternative reaction pathway:
• Temporarily reacting with the substrate, forming a covalent intermediate to provide a lower energy transition state
  (2024). 9781464109621, W.H. Freeman. ISBN 9781464109621
3. By destabilizing the substrate ground state:
• Distorting bound substrate(s) into their transition state form to reduce the energy required to reach the transition state
• By orienting the substrates into a productive arrangement to reduce the reaction entropy change
  Jencks WP (1987). 9780486654607, Dover. ISBN 9780486654607
  (the contribution of this mechanism to catalysis is relatively small)

Enzymes may use several of these mechanisms simultaneously. For example, such as trypsin perform covalent catalysis using a catalytic triad, stabilize charge build-up on the transition states using an oxyanion hole, complete hydrolysis using an oriented water substrate.

---

Dynamics

Enzymes are not rigid, static structures; instead they have complex internal dynamic motions – that is, movements of parts of the enzyme's structure such as individual amino acid residues, groups of residues forming a protein loop or unit of secondary structure, or even an entire protein domain. These motions give rise to a conformational ensemble of slightly different structures that interconvert with one another at equilibrium. Different states within this ensemble may be associated with different aspects of an enzyme's function. For example, different conformations of the enzyme dihydrofolate reductase are associated with the substrate binding, catalysis, cofactor release, and product release steps of the catalytic cycle, consistent with catalytic resonance theory.

---

Substrate presentation

Substrate presentation is a process where the enzyme is sequestered away from its substrate. Enzymes can be sequestered to the plasma membrane away from a substrate in the nucleus or cytosol. Or within the membrane, an enzyme can be sequestered into lipid rafts away from its substrate in the disordered region. When the enzyme is released it mixes with its substrate. Alternatively, the enzyme can be sequestered near its substrate to activate the enzyme. For example, the enzyme can be soluble and upon activation bind to a lipid in the plasma membrane and then act upon molecules in the plasma membrane.

---

Allosteric modulation

Allosteric sites are pockets on the enzyme, distinct from the active site, that bind to molecules in the cellular environment. These molecules then cause a change in the conformation or dynamics of the enzyme that is transduced to the active site and thus affects the reaction rate of the enzyme. In this way, allosteric interactions can either inhibit or activate enzymes. Allosteric interactions with metabolites upstream or downstream in an enzyme's metabolic pathway cause feedback regulation, altering the activity of the enzyme according to the flux through the rest of the pathway.

---

Cofactors

Some enzymes do not need additional components to show full activity. Others require non-protein molecules called cofactors to be bound for activity. Cofactors can be either inorganic (e.g., metal and iron–sulfur clusters) or (e.g., flavin group and heme). These cofactors serve many purposes; for instance, metal ions can help in stabilizing nucleophilic species within the active site.

(2024). 9781118918401, John Wiley & Sons, Inc.. ISBN 9781118918401

Organic cofactors can be either , which are released from the enzyme's active site during the reaction, or prosthetic groups, which are tightly bound to an enzyme. Organic prosthetic groups can be covalently bound (e.g., biotin in enzymes such as pyruvate carboxylase).

An example of an enzyme that contains a cofactor is carbonic anhydrase, which uses a zinc cofactor bound as part of its active site. These tightly bound ions or molecules are usually found in the active site and are involved in catalysis. For example, flavin and heme cofactors are often involved in redox reactions.

Enzymes that require a cofactor but do not have one bound are called apoenzymes or apoproteins. An enzyme together with the cofactor(s) required for activity is called a holoenzyme (or haloenzyme). The term holoenzyme can also be applied to enzymes that contain multiple protein subunits, such as the ; here the holoenzyme is the complete complex containing all the subunits needed for activity.

---

Coenzymes

Coenzymes are small organic molecules that can be loosely or tightly bound to an enzyme. Coenzymes transport chemical groups from one enzyme to another.

Wagner AL (1975). 9780882752587, Krieger Pub Co. ISBN 9780882752587

Examples include NADH, NADPH and adenosine triphosphate (ATP). Some coenzymes, such as flavin mononucleotide (FMN), flavin adenine dinucleotide (FAD), thiamine pyrophosphate (TPP), and tetrahydrofolate (THF), are derived from . These coenzymes cannot be synthesized by the body de novo and closely related compounds (vitamins) must be acquired from the diet. The chemical groups carried include:

• the hydride ion (H⁻), carried by NAD or NADP⁺
• the phosphate group, carried by adenosine triphosphate
• the acetyl group, carried by coenzyme A
• formyl, methenyl or methyl groups, carried by folic acid and
• the methyl group, carried by S-adenosylmethionine

Since coenzymes are chemically changed as a consequence of enzyme action, it is useful to consider coenzymes to be a special class of substrates, or second substrates, which are common to many different enzymes. For example, about 1000 enzymes are known to use the coenzyme NADH.

Coenzymes are usually continuously regenerated and their concentrations maintained at a steady level inside the cell. For example, NADPH is regenerated through the pentose phosphate pathway and S-adenosylmethionine by methionine adenosyltransferase. This continuous regeneration means that small amounts of coenzymes can be used very intensively. For example, the human body turns over its own weight in ATP each day.

---

Thermodynamics

As with all catalysts, enzymes do not alter the position of the chemical equilibrium of the reaction. In the presence of an enzyme, the reaction runs in the same direction as it would without the enzyme, just more quickly. For example, carbonic anhydrase catalyzes its reaction in either direction depending on the concentration of its reactants:

(2024). 9780781749916, Lippincott Williams & Wilkins. ISBN 9780781749916

The rate of a reaction is dependent on the activation energy needed to form the transition state which then decays into products. Enzymes increase reaction rates by lowering the energy of the transition state. First, binding forms a low energy enzyme-substrate complex (ES). Second, the enzyme stabilises the transition state such that it requires less energy to achieve compared to the uncatalyzed reaction (ES^‡). Finally the enzyme-product complex (EP) dissociates to release the products.

Enzymes can couple two or more reactions, so that a thermodynamically favorable reaction can be used to "drive" a thermodynamically unfavourable one so that the combined energy of the products is lower than the substrates. For example, the hydrolysis of ATP is often used to drive other chemical reactions.

(2024). 9780125181211, Academic. ISBN 9780125181211

---

Kinetics

Enzyme kinetics is the investigation of how enzymes bind substrates and turn them into products.

(2024). 9783527806461, Wiley-VCH. ISBN 9783527806461

The rate data used in kinetic analyses are commonly obtained from . In 1913 Leonor Michaelis and Maud Leonora Menten proposed a quantitative theory of enzyme kinetics, which is referred to as Michaelis–Menten kinetics.; The major contribution of Michaelis and Menten was to think of enzyme reactions in two stages. In the first, the substrate binds reversibly to the enzyme, forming the enzyme-substrate complex. This is sometimes called the Michaelis–Menten complex in their honor. The enzyme then catalyzes the chemical step in the reaction and releases the product. This work was further developed by G. E. Briggs and J. B. S. Haldane, who derived kinetic equations that are still widely used today.

Enzyme rates depend on solution conditions and substrate concentration. To find the maximum speed of an enzymatic reaction, the substrate concentration is increased until a constant rate of product formation is seen. This is shown in the saturation curve on the right. Saturation happens because, as substrate concentration increases, more and more of the free enzyme is converted into the substrate-bound ES complex. At the maximum reaction rate ( V_max) of the enzyme, all the enzyme active sites are bound to substrate, and the amount of ES complex is the same as the total amount of enzyme.

V_max is only one of several important kinetic parameters. The amount of substrate needed to achieve a given rate of reaction is also important. This is given by the Michaelis–Menten constant ( K_m), which is the substrate concentration required for an enzyme to reach one-half its maximum reaction rate; generally, each enzyme has a characteristic K_M for a given substrate. Another useful constant is k_cat, also called the turnover number, which is the number of substrate molecules handled by one active site per second.

The efficiency of an enzyme can be expressed in terms of k_cat/ K_m. This is also called the specificity constant and incorporates the for all steps in the reaction up to and including the first irreversible step. Because the specificity constant reflects both affinity and catalytic ability, it is useful for comparing different enzymes against each other, or the same enzyme with different substrates. The theoretical maximum for the specificity constant is called the diffusion limit and is about 10⁸ to 10⁹ (M⁻¹ s⁻¹). At this point every collision of the enzyme with its substrate will result in catalysis, and the rate of product formation is not limited by the reaction rate but by the diffusion rate. Enzymes with this property are called catalytically perfect or kinetically perfect. Example of such enzymes are triose-phosphate isomerase, carbonic anhydrase, acetylcholinesterase, catalase, fumarase, β-lactamase, and superoxide dismutase. The turnover of such enzymes can reach several million reactions per second. But most enzymes are far from perfect: the average values of $k\_\{\backslash rm\; cat\}/K\_\{\backslash rm\; m\}$ and $k\_\{\backslash rm\; cat\}$ are about $10^5\; \{\backslash rm\; s\}^\{-1\}\{\backslash rm\; M\}^\{-1\}$ and $10\; \{\backslash rm\; s\}^\{-1\}$, respectively.

Michaelis–Menten kinetics relies on the law of mass action, which is derived from the assumptions of free diffusion and thermodynamically driven random collision. Many biochemical or cellular processes deviate significantly from these conditions, because of macromolecular crowding and constrained molecular movement. More recent, complex extensions of the model attempt to correct for these effects.

---

Inhibition

Enzyme reaction rates can be decreased by various types of enzyme inhibitors.

Cornish-Bowden A (2024). 9781855781580, Portland Press. ISBN 9781855781580

---

Types of inhibition

---

Competitive

A competitive inhibitor and substrate cannot bind to the enzyme at the same time. Often competitive inhibitors strongly resemble the real substrate of the enzyme. For example, the drug methotrexate is a competitive inhibitor of the enzyme dihydrofolate reductase, which catalyzes the reduction of folic acid to tetrahydrofolate. The similarity between the structures of dihydrofolate and this drug are shown in the accompanying figure. This type of inhibition can be overcome with high substrate concentration. In some cases, the inhibitor can bind to a site other than the binding-site of the usual substrate and exert an allosteric effect to change the shape of the usual binding-site.

---

Non-competitive

A non-competitive inhibitor binds to a site other than where the substrate binds. The substrate still binds with its usual affinity and hence K_m remains the same. However the inhibitor reduces the catalytic efficiency of the enzyme so that V_max is reduced. In contrast to competitive inhibition, non-competitive inhibition cannot be overcome with high substrate concentration.

---

Uncompetitive

An uncompetitive inhibitor cannot bind to the free enzyme, only to the enzyme-substrate complex; hence, these types of inhibitors are most effective at high substrate concentration. In the presence of the inhibitor, the enzyme-substrate complex is inactive. This type of inhibition is rare.

---

Mixed

A mixed inhibition binds to an allosteric site and the binding of the substrate and the inhibitor affect each other. The enzyme's function is reduced but not eliminated when bound to the inhibitor. This type of inhibitor does not follow the Michaelis–Menten equation.

---

Irreversible

An irreversible inhibitor permanently inactivates the enzyme, usually by forming a covalent bond to the protein. Penicillin and aspirin are common drugs that act in this manner.

---

Functions of inhibitors

In many organisms, inhibitors may act as part of a feedback mechanism. If an enzyme produces too much of one substance in the organism, that substance may act as an inhibitor for the enzyme at the beginning of the pathway that produces it, causing production of the substance to slow down or stop when there is sufficient amount. This is a form of negative feedback. Major metabolic pathways such as the citric acid cycle make use of this mechanism.

Since inhibitors modulate the function of enzymes they are often used as drugs. Many such drugs are reversible competitive inhibitors that resemble the enzyme's native substrate, similar to methotrexate above; other well-known examples include used to treat high cholesterol, and protease inhibitors used to treat retroviral infections such as HIV. A common example of an irreversible inhibitor that is used as a drug is aspirin, which inhibits the Cyclooxygenase and Cyclooxygenase enzymes that produce the inflammation messenger prostaglandin. Other enzyme inhibitors are poisons. For example, the poison cyanide is an irreversible enzyme inhibitor that combines with the copper and iron in the active site of the enzyme cytochrome c oxidase and blocks cellular respiration.

---

Factors affecting enzyme activity

As enzymes are made up of proteins, their actions are sensitive to change in many physio chemical factors such as pH, temperature, substrate concentration, etc.

The following table shows pH optima for various enzymes.

(1999). 9788121903431, S. Chand and Co. ISBN 9788121903431

+ !Enzyme !Optimum pH !pH description
Pepsin	1.5–1.6	Highly acidic
Invertase	4.5	Acidic
Lipase (stomach)	4.0–5.0	Acidic
Lipase (castor oil)	4.7	Acidic
Lipase (pancreas)	8.0	Alkaline
Amylase (malt)	4.6–5.2	Acidic
Amylase (pancreas)	6.7–7.0	Acidic-neutral
Cellobiase	5.0	Acidic
Maltase	6.1–6.8	Acidic
Sucrase	6.2	Acidic
Catalase	7.0	Neutral
Urease	7.0	Neutral
Cholinesterase	7.0	Neutral
Ribonuclease	7.0–7.5	Neutral
Fumarase	7.8	Alkaline
Trypsin	7.8–8.7	Alkaline
Adenosine triphosphate	9.0	Alkaline
Arginase	10.0	Highly alkaline

---

Biological function

Enzymes serve a wide variety of functions inside living organisms. They are indispensable for signal transduction and cell regulation, often via and . They also generate movement, with myosin hydrolyzing adenosine triphosphate (ATP) to generate muscle contraction, and also transport cargo around the cell as part of the cytoskeleton. Other in the cell membrane are ion pumps involved in active transport. Enzymes are also involved in more exotic functions, such as luciferase generating light in fireflies. can also contain enzymes for infecting cells, such as the HIV integrase and reverse transcriptase, or for viral release from cells, like the influenza virus neuraminidase.

An important function of enzymes is in the digestive systems of animals. Enzymes such as and break down large molecules (starch or , respectively) into smaller ones, so they can be absorbed by the intestines. Starch molecules, for example, are too large to be absorbed from the intestine, but enzymes hydrolyze the starch chains into smaller molecules such as maltose and eventually glucose, which can then be absorbed. Different enzymes digest different food substances. In , which have herbivorous diets, microorganisms in the gut produce another enzyme, cellulase, to break down the cellulose cell walls of plant fiber.

---

Metabolism

Several enzymes can work together in a specific order, creating metabolic pathways. In a metabolic pathway, one enzyme takes the product of another enzyme as a substrate. After the catalytic reaction, the product is then passed on to another enzyme. Sometimes more than one enzyme can catalyze the same reaction in parallel; this can allow more complex regulation: with, for example, a low constant activity provided by one enzyme but an inducible high activity from a second enzyme.

Enzymes determine what steps occur in these pathways. Without enzymes, metabolism would neither progress through the same steps and could not be regulated to serve the needs of the cell. Most central metabolic pathways are regulated at a few key steps, typically through enzymes whose activity involves the hydrolysis of ATP. Because this reaction releases so much energy, other reactions that are endothermic can be coupled to ATP hydrolysis, driving the overall series of linked metabolic reactions.

---

Control of activity

There are five main ways that enzyme activity is controlled in the cell.

---

Regulation

Enzymes can be either enzyme activator or enzyme inhibitor by other molecules. For example, the end product(s) of a metabolic pathway are often inhibitors for one of the first enzymes of the pathway (usually the first irreversible step, called committed step), thus regulating the amount of end product made by the pathways. Such a regulatory mechanism is called a negative feedback mechanism, because the amount of the end product produced is regulated by its own concentration. Negative feedback mechanism can effectively adjust the rate of synthesis of intermediate metabolites according to the demands of the cells. This helps with effective allocations of materials and energy economy, and it prevents the excess manufacture of end products. Like other homeostasis, the control of enzymatic action helps to maintain a stable internal environment in living organisms.

---

Post-translational modification

Examples of post-translational modification include phosphorylation, myristoylation and glycosylation.

Suzuki H (2024). 9789814463928, CRC Press. ISBN 9789814463928

For example, in the response to insulin, the phosphorylation of multiple enzymes, including glycogen synthase, helps control the synthesis or degradation of glycogen and allows the cell to respond to changes in blood sugar. Another example of post-translational modification is the cleavage of the polypeptide chain. Chymotrypsin, a digestive protease, is produced in inactive form as chymotrypsinogen in the pancreas and transported in this form to the stomach where it is activated. This stops the enzyme from digesting the pancreas or other tissues before it enters the gut. This type of inactive precursor to an enzyme is known as a zymogen or proenzyme.

---

Quantity

Enzyme production (transcription and translation of enzyme genes) can be enhanced or diminished by a cell in response to changes in the cell's environment. This form of gene regulation is called enzyme induction. For example, bacteria may become resistant to antibiotics such as penicillin because enzymes called are induced that hydrolyse the crucial Beta-lactam within the penicillin molecule. Another example comes from enzymes in the liver called cytochrome P450 oxidases, which are important in drug metabolism. Induction or inhibition of these enzymes can cause .

(2024). 9780748760114, Nelson Thornes Publishers. ISBN 9780748760114

Enzyme levels can also be regulated by changing the rate of enzyme catabolism. The opposite of enzyme induction is enzyme repression.

---

Subcellular distribution

Enzymes can be compartmentalized, with different metabolic pathways occurring in different cellular compartments. For example, are synthesized by one set of enzymes in the cytosol, endoplasmic reticulum and golgi apparatus and used by a different set of enzymes as a source of energy in the mitochondrion, through β-oxidation. In addition, trafficking of the enzyme to different compartments may change the degree of protonation (e.g., the neutral cytoplasm and the acidic lysosome) or oxidative state (e.g., oxidizing periplasm or reducing cytoplasm) which in turn affects enzyme activity.

Suzuki H (2024). 9789814463928, CRC Press. ISBN 9789814463928

In contrast to partitioning into membrane bound organelles, enzyme subcellular localisation may also be altered through polymerisation of enzymes into macromolecular cytoplasmic filaments.

---

Organ specialization

In multicellular , cells in different organs and tissues have different patterns of gene expression and therefore have different sets of enzymes (known as ) available for metabolic reactions. This provides a mechanism for regulating the overall metabolism of the organism. For example, hexokinase, the first enzyme in the glycolysis pathway, has a specialized form called glucokinase expressed in the liver and pancreas that has a lower affinity for glucose yet is more sensitive to glucose concentration. This enzyme is involved in sensing blood sugar and regulating insulin production.

---

Involvement in disease

Since the tight control of enzyme activity is essential for homeostasis, any malfunction (mutation, overproduction, underproduction or deletion) of a single critical enzyme can lead to a genetic disease. The malfunction of just one type of enzyme out of the thousands of types present in the human body can be fatal. An example of a fatal genetic disease due to enzyme insufficiency is Tay–Sachs disease, in which patients lack the enzyme hexosaminidase.

One example of enzyme deficiency is the most common type of phenylketonuria. Many different single amino acid mutations in the enzyme phenylalanine hydroxylase, which catalyzes the first step in the degradation of phenylalanine, result in build-up of phenylalanine and related products. Some mutations are in the active site, directly disrupting binding and catalysis, but many are far from the active site and reduce activity by destabilising the protein structure, or affecting correct oligomerisation. This can lead to intellectual disability if the disease is untreated. Another example is pseudocholinesterase deficiency, in which the body's ability to break down choline ester drugs is impaired. Oral administration of enzymes can be used to treat some functional enzyme deficiencies, such as pancreatic insufficiency and lactose intolerance.

Another way enzyme malfunctions can cause disease comes from germline mutations in genes coding for DNA repair enzymes. Defects in these enzymes cause cancer because cells are less able to repair mutations in their . This causes a slow accumulation of mutations and results in the carcinogenesis. An example of such a hereditary cancer syndrome is xeroderma pigmentosum, which causes the development of in response to even minimal exposure to ultraviolet light.

(2024). 9781437703146, Saunders/ Elsevier. ISBN 9781437703146

---

Evolution

Similar to any other protein, enzymes change over time through and sequence divergence. Given their central role in metabolism, enzyme evolution plays a critical role in adaptation. A key question is therefore whether and how enzymes can change their enzymatic activities alongside. It is generally accepted that many new enzyme activities have evolved through gene duplication and mutation of the duplicate copies although evolution can also happen without duplication. One example of an enzyme that has changed its activity is the ancestor of methionyl aminopeptidase (MAP) and creatine amidinohydrolase (creatinase) which are clearly homologous but catalyze very different reactions (MAP removes the amino-terminal methionine in new proteins while creatinase hydrolyses creatine to sarcosine and urea). In addition, MAP is metal-ion dependent while creatinase is not, hence this property was also lost over time. Small changes of enzymatic activity are extremely common among enzymes. In particular, substrate binding specificity (see above) can easily and quickly change with single amino acid changes in their substrate binding pockets. This is frequently seen in the main enzyme classes such as .

Artificial (in vitro) evolution is now commonly used to modify enzyme activity or specificity for industrial applications (see below).

---

Industrial applications

Enzymes are used in the chemical industry and other industrial applications when extremely specific catalysts are required. Enzymes in general are limited in the number of reactions they have evolved to catalyze and also by their lack of stability in and at high temperatures. As a consequence, protein engineering is an active area of research and involves attempts to create new enzymes with novel properties, either through rational design or in vitro evolution. These efforts have begun to be successful, and a few enzymes have now been designed "from scratch" to catalyze reactions that do not occur in nature.

Biofuel		Break down cellulose into sugars that can be fermented to produce cellulosic ethanol.
		Pretreatment of biomass for biofuel production.
Biological detergent	, ,	Remove protein, starch, and fat or oil stains from laundry and dishware.
		Remove food stains from the common food additive guar gum.
Brewing	Amylase, ,	Split polysaccharides and proteins in the malt. (1998). 9780412298004, Blackie Academic. ISBN 9780412298004
		Improve the wort and beer filtration characteristics.
	Amyloglucosidase and	Make low-calorie beer and adjust fermentability.
	Acetolactate decarboxylase (ALDC)	Increase fermentation efficiency by reducing diacetyl formation.
Cooking	Papain	Tenderizer meat for cooking. (2024). 9780387713274, Springer. ISBN 9780387713274
Dairy	Chymosin	Hydrolyze protein in the manufacture of cheese.
		Produce Camembert cheese and such as Roquefort.
Food processing		Produce sugars from starch, such as in making high-fructose corn syrup.
		Lower the protein level of flour, as in biscuit-making.
	Trypsin	Manufacture hypoallergenic baby foods.
	,	Clarify .
Molecular biology	, DNA ligase and	Use restriction digestion and the polymerase chain reaction to create recombinant DNA.
Paper	, and lignin peroxidases	Remove lignin from kraft pulp.
Personal care		Remove proteins on to prevent infections.
Starch		Convert starch into glucose and various syrups. (2024). 9780080926551, Academic. ISBN 9780080926551

---

See also

• Industrial enzymes
• List of enzymes
• Molecular machine

---

Enzyme databases

• BRENDA
• ExPASy
• IntEnz
• KEGG
• MetaCyc

---

Further reading

General

• (2024). 9780716730514, W. H. Freeman. . ISBN 9780716730514
  , A biochemistry textbook available free online through NCBI Bookshelf.

Etymology and history

• (1997). 9788437033280, Universitat de València. . ISBN 9788437033280
  , A history of early enzymology.

Enzyme structure and mechanism

• Suzuki H (2024). 9789814463928, CRC Press. ISBN 9789814463928

Kinetics and inhibition

• (2024). 9783527330744, Wiley-VCH. ISBN 9783527330744

---

External links

Categories: Featured Article, Biomolecules, Catalysis, Metabolism, Process Chemicals

Post Comment