Product Code Database
Scandium is a chemical element; it has symbol Sc and atomic number 21. It is a silvery-white metallic d-block. Historically, it has been classified as a rare-earth element, together with yttrium and the . It was discovered in 1879 by spectral analysis of the euxenite and gadolinite from Scandinavia.
Scandium is present in most of the deposits of rare-earth and uranium compounds, but it is extracted from these ores in only a few mines worldwide. Because of the low availability and difficulties in the preparation of metallic scandium, which was first done in 1937, applications for scandium were not developed until the 1970s, when the positive effects of scandium on were discovered. Its use in such alloys remains its only major application. The global trade of scandium oxide is 15–20 per year.
The properties of scandium compounds are intermediate between those of aluminium and yttrium. A diagonal relationship exists between the behavior of magnesium and scandium, just as there is between beryllium and aluminium. In the chemical compounds of the elements in group 3, the predominant oxidation state is +3.
The known isotopes of scandium range from 37Sc to 63Sc, and the most stable radioisotopes are 46Sc with a half-life of 83.76 days, 47Sc with a half-life of 3.3492 days, 48Sc at 43.67 hours, 44Sc at 4.042 hours, and 43Sc at 3.891 hours. All others have half-lives shorter than an hour, and the majority of these shorter than 15 seconds. The most stable meta state is 44m3Sc with half-life 58.6 hours; this is the lightest isotope with a long-lived isomer.
The low mass isotopes are very difficult to create. The initial detection of 37Sc and 38Sc only resulted in the characterization of their mass excess. Latest discovered isotopes, Discovery of Nuclides Project
The primary decay mode of ground-state scandium isotopes at masses lower than the only stable isotope, 45Sc, is electron capture (or positron emission), but the lightest isotopes (37Sc to 39Sc) undergo proton emission instead, all three of these producing calcium isotopes. The primary decay mode for heavier isotopes is beta emission, producing titanium isotopes.
The stable form of scandium is created in via the r-process. Also, scandium is created by cosmic ray spallation of the more abundant iron peak nuclei. Example reactions are:
To produce metallic scandium, the oxide is converted to scandium fluoride and then redox with metallic calcium.
Madagascar and the Iveland-Evje region in Norway have the only deposits of minerals with high scandium content, thortveitite ), but these are not being exploited. The mineral kolbeckite has a very high scandium content but is not available in any larger deposits.
The absence of reliable, secure, stable, long-term production has limited the commercial applications of scandium. Despite this low level of use, scandium offers significant benefits. Particularly promising is the strengthening of aluminium alloys with as little as 0.5% scandium. Scandium-stabilized zirconia enjoys a growing market demand for use as a high-efficiency electrolyte in solid oxide fuel cells.
The USGS reports that, from 2015 to 2019 in the US, the price of small quantities of scandium ingot has been $107 to $134 per gram, and that of scandium oxide $4 to $5 per gram.
α- and γ-ScOOH are isostructural with their aluminium hydroxide oxide counterparts. Solutions of in water are acidic due to hydrolysis.
Lower oxidation states (+2, +1, 0) have also been observed in organoscandium compounds.
Metallic scandium was produced for the first time in 1937 by electrolysis of a eutectic mixture of potassium, lithium, and scandium chlorides, at 700–800 °Celsius. The first pound of 99% pure scandium metal was produced in 1960. Production of aluminium alloys began in 1971, following a US patent.Burrell, A. Willey Lower "Aluminum scandium alloy" issued on November 9, 1971. Aluminium-scandium alloys were also developed in the USSR.
Laser crystals of gadolinium-scandium-gallium garnet (GSGG) were used in strategic defense applications developed for the Strategic Defense Initiative (SDI) in the 1980s and 1990s.
The addition of scandium to aluminium limits the grain growth in the heat zone of welded aluminium components. This has two beneficial effects: the precipitated forms smaller crystals than in other , and the volume of precipitate-free zones at the grain boundaries of age-hardening aluminium alloys is reduced. The precipitate is a coherent precipitate that strengthens the aluminum matrix by applying elastic strain fields that inhibit dislocation movement (i.e., plastic deformation). has an equilibrium L12 superlattice structure exclusive to this system.
A fine dispersion of nano scale precipitate can be achieved via heat treatment that can also strengthen the alloys through order hardening. Recent developments include the additions of transition metals such as zirconium (Zr) and rare earth metals like erbium (Er) produce shells surrounding the spherical precipitate that reduce coarsening.
These shells are dictated by the diffusivity of the alloying element and lower the cost of the alloy due to less Sc being substituted in part by Zr while maintaining stability and less Sc being needed to form the precipitate. These have made somewhat competitive with titanium alloys along with a wide array of applications. However, , which are similar in lightness and strength, are cheaper and much more widely used.
The alloy is as strong as titanium, light as aluminium, and hard as some ceramics.
Some items of sports equipment, which rely on lightweight high-performance materials, have been made with scandium-aluminium alloys, including , tent poles and and components. Lacrosse sticks are also made with scandium. The American firearm manufacturing company Smith & Wesson produces semi-automatic pistols and revolvers with frames of scandium alloy and cylinders of titanium or carbon steel.
Since 2013, Apworks GmbH, a spin-off of Airbus, have marketed a high strength Scandium containing aluminium alloy processed using metal 3D-Printing (Laser Powder Bed Fusion) under the trademark Scalmalloy which claims very high strength & ductility.
Dentists use erbium-chromium-doped yttrium-scandium-gallium garnet () lasers for cavity preparation and in endodontics.
The 12.4 keV nuclear transition of 45Sc has been studied as a reference for timekeeping applications, with a theoretical precision as much as three orders of magnitude better than the current caesium reference clocks.
Scandium has been proposed for use in solid oxide fuel cells (SOFCs) as a dopant in the electrolyte material, typically zirconia. Scandium oxide is one of several possible additives to enhance the ionic conductivity of the zirconia, improving the overall thermal stability, performance and efficiency of the fuel cell. This application would be particularly valuable in clean energy technologies, as SOFCs can utilize a variety of fuels and have high energy conversion efficiencies.
Occurrence
In Earth's crust, scandium is not rare. Estimates vary from 18 to 25 ppm, which is comparable to the abundance of cobalt (20–30 ppm). Scandium is only the 50th most common element on Earth (35th most abundant element in the crust), but it is the 23rd most common element in the Sun and the 26th most abundant element in the stars. However, scandium is distributed sparsely and occurs in trace amounts in many . Rare minerals from Scandinavia and Madagascar such as thortveitite, euxenite, and gadolinite are the only known concentrated sources of this element, all of which are sources of other rare earths. Thortveitite can contain up to 45% scandium oxide.
Production
The world production of scandium is in the order of 15–20 tonnes per year, in the form of scandium oxide. The demand is slightly higher, and both the production and demand keep increasing. In 2003, only three mines produced scandium: the uranium and iron mines in Zhovti Vody in Ukraine, the rare-earth mines in Bayan Obo, China, and the apatite mines in the Kola Peninsula, Russia. Since then, many other countries have built scandium-producing facilities, including 5 tonnes/year (7.5 tonnes/year ) by Nickel Asia Corporation and Sumitomo Metal Mining in the Philippines.
In the United States, NioCorp Development hopes to raise $1 billion toward opening a niobium mine at its Elk Creek site in southeast Nebraska, which may be able to produce as much as 95 tonnes of scandium oxide annually. In each case, scandium is a byproduct of the extraction of other elements and is sold as scandium oxide. Scandium. USGS.
Compounds
Scandium chemistry is almost completely dominated by the trivalent ion, Sc3+. The radii of M3+ ions in the table below indicate that the chemical properties of scandium ions have more in common with yttrium ions than with aluminium ions. In part because of this similarity, scandium is often classified as a lanthanide-like element.
> + Ionic radius (pm)
lutetium 86.1
Oxides and hydroxides
The oxide scandium oxide and the hydroxide are amphoteric:
Halides and pseudohalides
The , where X= Cl, scandium bromide, or I, are very soluble in water, but is insoluble. In all four halides, the scandium is 6-coordinated. The halides are Lewis acids; for example, dissolves in a solution containing excess fluoride ion to form . The coordination number 6 is typical for Sc(III). In the larger Y3+ and La3+ ions, coordination numbers of 8 and 9 are common. Scandium triflate is sometimes used as a Lewis acid catalyst in organic chemistry.
Organic derivatives
Scandium forms a series of organometallic compounds with cyclopentadienyl ligands (Cp), similar to the behavior of the lanthanides. One example is the chlorine-bridged dimer, and related derivatives of pentamethylcyclopentadienyl ligands.
Uncommon oxidation states
Compounds that feature scandium in oxidation states other than +3 are rare but well characterized. The blue-black compound is one of the simplest. This material adopts a sheet-like structure that exhibits extensive bonding between the scandium(II) centers. Scandium hydride is not well understood, although it appears not to be a hydride of Sc(II). As is observed for most elements, a diatomic scandium hydride has been observed spectroscopically at high temperatures in the gas phase. Scandium borides and carbides are non-stoichiometric, as is typical for neighboring elements.Holleman, A. F.; Wiberg, E. "Inorganic Chemistry" Academic Press: San Diego, 2001. .
History
Dmitri Mendeleev, who is referred to as the father of the periodic table, predicted the existence of an element ekaboron, with an atomic mass between 40 and 48 in 1869. Lars Fredrik Nilson and his team detected this element in the minerals euxenite and gadolinite in 1879. Nilson prepared 2 grams of scandium oxide of high purity. He named the element scandium, from the Latin Scandia meaning "Scandinavia". Nilson was apparently unaware of Mendeleev's prediction, but Per Teodor Cleve recognized the correspondence and notified Mendeleev.
Applications
Aluminium alloys
The main application of scandium by weight is in aluminium-scandium alloys for minor aerospace industry components. These alloys contain between 0.1% and 0.5% of scandium. They were used in Russian military aircraft, specifically the Mikoyan-Gurevich MiG-21 and MiG-29.
Light sources
The first scandium-based metal-halide lamps were patented by General Electric and made in North America, although they are now produced in all major industrialized countries. Approximately 20 kg of scandium (as ) is used annually in the United States for high-intensity discharge lamps.Hammond, C. R. in CRC Handbook of Chemistry and Physics 85th ed., Section 4; The Elements. One type of metal-halide lamp, similar to the mercury-vapor lamp, is made from scandium triiodide and sodium iodide. This lamp is a white-light source with high color rendering index that sufficiently resembles sunlight to allow good color-reproduction with television cameras. About 80 kg of scandium is used in metal-halide lamps/light bulbs globally per year.
(2011). 9780857292803, Springer. ISBN 9780857292803
Other
The radioactive isotope 46Sc is used in oil refinery as a tracing agent. Scandium triflate is a catalytic Lewis acid used in organic chemistry.
Health and safety
Elemental scandium is considered non-toxic, though extensive animal testing of scandium compounds has not been done. The median lethal dose (LD50) levels for scandium chloride for rats have been determined as 755 mg/kg for intraperitoneal and 4 g/kg for oral administration. In the light of these results, compounds of scandium should be handled as compounds of moderate toxicity. Scandium appears to be handled by the body in a manner similar to gallium, with similar hazards involving its poorly soluble hydroxide.
Notes
Further reading
External links
|
|
