Radium is a chemical element; it has chemical symbol Ra and atomic number 88. It is the sixth element in group 2 of the periodic table, also known as the alkaline earth metals. Pure radium is silvery-white, but it readily reacts with nitrogen (rather than oxygen) upon exposure to air, forming a black surface layer of radium nitride (Ra3N2). All isotopes of radium are radioactive, the most stable isotope being radium-226 with a half-life of 1,600 years. When radium decays, it emits ionizing radiation as a by-product, which can excite fluorescent chemicals and cause radioluminescence. For this property, it was widely used in self-luminous paints following its discovery. Of the Radionuclide that occur in quantity, radium is considered particularly Toxicity, and it is Carcinogen due to the radioactivity of both it and its immediate decay product radon as well as its tendency to Bone seeker.
Radium, in the form of radium chloride, was discovered by Marie Curie and Pierre Curie in 1898 from ore mined at Jáchymov. They extracted the radium compound from uraninite and published the discovery at the French Academy of Sciences five days later. Radium was isolated in its state by Marie Curie and André-Louis Debierne through the electrolysis of radium chloride in 1910, and soon afterwards the metal started being produced on larger scales in Austria, the United States, and Belgium. However, the amount of radium produced globally has always been small in comparison to other elements, and by the 2010s, annual production of radium, mainly via extraction from spent nuclear fuel, was less than 100 grams.
In nature, radium is found in uranium ores in quantities as small as a seventh of a gram per ton of uraninite, and in thorium ores in trace amounts. Radium is not necessary for living organisms, and its radioactivity and chemical reactivity make adverse health effects likely when it is incorporated into biochemical processes because of its chemical mimicry of calcium. As of 2018, other than in nuclear medicine, radium has no commercial applications. Formerly, from the 1910s to the 1970s, it was used as a radioactive source for radioluminescent devices and also in radioactive quackery for its supposed curative power. In nearly all of its applications, radium has been replaced with less dangerous radioisotopes, with one of its few remaining non-medical uses being the production of actinium in Nuclear reactor.
Pure radium is a volatile, lustrous silvery-white metal, even though its lighter congeners calcium, strontium, and barium have a slight yellow tint. Radium's lustrous surface rapidly becomes black upon exposure to air, likely due to the formation of radium nitride (Ra3N2). Its melting point is either or and its boiling point is ; however, this is not well established.
these are the five most stable isotopes of radium. All other 27 known radium isotopes have half-lives under two hours, and the majority have half-lives under a minute. Of these, Ra (half-life 28 s) also occurs as a Np daughter, and Ra and Ra would be produced by the still-unobserved double beta decay of natural radon isotopes. At least 12 have been reported, the most stable of which is radium-205m with a half-life between 130~230 milliseconds; this is still shorter than twenty-four ground state radium isotopes.
Ra is the most stable isotope of radium and is the last isotope in the decay chain of uranium-238 with a half-life of over a millennium; it makes up almost all of natural radium. Its immediate decay product is the dense radioactive noble gas radon (specifically the isotope Rn), which is responsible for much of the danger of environmental radium. It is 2.7 million times more radioactive than the same molar amount of natural uranium (mostly uranium-238), due to its proportionally shorter half-life.
A sample of radium metal maintains itself at a higher temperature than its surroundings because of the radiation it emits. Natural radium (which is mostly Ra) emits mostly alpha particles, but other steps in its decay chain (the uranium or radium series) emit alpha or beta particles, and almost all particle emissions are accompanied by gamma rays.
Experimental nuclear physics studies have shown that nuclei of several radium isotopes, such as Ra, Ra and Ra, have reflection-asymmetric ("pear-like") shapes.. In particular, this experimental information on radium-224
has been obtained at ISOLDE using a technique called Coulomb excitation.
Radium oxide (RaO) is poorly characterized, as the reaction of radium with air results in the formation of radium nitride. Radium hydroxide (Ra(OH)2) is formed via the reaction of radium metal with water, and is the most readily soluble among the alkaline earth hydroxides and a stronger base than its barium congener, barium hydroxide. It is also more soluble than actinium hydroxide and thorium hydroxide: these three adjacent hydroxides may be separated by precipitating them with ammonia.
Radium chloride (RaCl2) is a colorless, Luminescence compound. It becomes yellow after some time due to self-damage by the alpha radiation given off by radium when it decays. Small amounts of barium impurities give the compound a rose color. It is soluble in water, though less so than barium chloride, and its solubility decreases with increasing concentration of hydrochloric acid. Crystallization from aqueous solution gives the dihydrate RaCl2·2H2O, isomorphous with its barium analog.
Radium bromide (RaBr2) is also a colorless, luminous compound. In water, it is more soluble than radium chloride. Like radium chloride, crystallization from aqueous solution gives the dihydrate RaBr2·2H2O, isomorphous with its barium analog. The ionizing radiation emitted by radium bromide excites nitrogen molecules in the air, making it glow. The emitted by radium quickly gain two electrons to become neutral helium, which builds up inside and weakens radium bromide crystals. This effect sometimes causes the crystals to break or even explode.
Radium nitrate (Ra(NO3)2) is a white compound that can be made by dissolving radium carbonate in nitric acid. As the concentration of nitric acid increases, the solubility of radium nitrate decreases, an important property for the chemical purification of radium.
Radium forms much the same insoluble salts as its lighter congener barium: it forms the insoluble radium sulfate (RaSO4, the most insoluble known sulfate), radium chromate (RaCrO4), radium carbonate (RaCO3), radium iodate (Ra(IO3)2), tetrafluoroberyllate (RaBeF4), and nitrate (Ra(NO3)2). With the exception of the carbonate, all of these are less soluble in water than the corresponding barium salts, but they are all isostructural to their barium counterparts. Additionally, radium phosphate, radium oxalate, and radium sulfite are probably also insoluble, as they coprecipitation with the corresponding insoluble barium salts. The great insolubility of radium sulfate (at 20 °C, only 2.1 milligram will dissolve in 1 kilogram of water) means that it is one of the less biologically dangerous radium compounds. The large ionic radius of Ra (148 pm) results in weak ability to form coordination complexes and poor extraction of radium from aqueous solutions when not at high pH.
In September 1910, Marie Curie and André-Louis Debierne announced that they had isolated radium as a pure metal through the electrolysis of pure radium chloride (RaCl2) solution using a mercury cathode, producing radium–mercury amalgam. This amalgam was then heated in an atmosphere of hydrogen gas to remove the mercury, leaving pure radium metal.
The general historical unit for radioactivity, the curie, is based on the radioactivity of Ra. it was originally defined as the radioactivity of one gram of radium-226,
During the litigation, it was determined that the company's scientists and management had taken considerable precautions to protect themselves from the effects of radiation, but it did not seem to protect their employees. Additionally, for several years the companies had attempted to cover up the effects and avoid liability by insisting that the Radium Girls were instead suffering from syphilis.
As a result of the lawsuit, and an extensive study by the U.S. Public Health Service, the adverse effects of radioactivity became widely known, and radium-dial painters were instructed in proper safety precautions and provided with protective gear. Radium continued to be used in dials, especially in manufacturing during World War II, but from 1925 onward there were no further injuries to dial painters.
From the 1960s the use of radium paint was discontinued. In many cases luminous dials were implemented with non-radioactive fluorescent materials excited by light; such devices glow in the dark after exposure to light, but the glow fades. Where long-lasting self-luminosity in darkness was required, safer radioactive promethium-147 (half-life 2.6 years) or tritium (half-life 12 years) paint was used; both continue to be used as of 2018. These had the added advantage of not degrading the phosphor over time, unlike radium. Tritium as it is used in these applications is considered safer than radium, as it emits very low-energy beta radiation (even lower-energy than the beta radiation emitted by promethium) which cannot penetrate the skin,
In the U.S., from 1940 through the 1960s, radium was used in Pharynx radium irradiation, a treatment that was administered to children to treat hearing loss and chronic otitis. The procedure was also administered to Airman and submarine crew to treat barotrauma.
Early in the 1900s, biologists used radium to induce mutations and study genetics. As early as 1904, Daniel MacDougal used radium in an attempt to determine whether it could provoke sudden large mutations and cause major evolutionary shifts. Thomas Hunt Morgan used radium to induce changes resulting in white-eyed fruit flies. Nobel-winning biologist Hermann Muller briefly studied the effects of radium on fruit fly mutations before turning to more affordable x-ray experiments.
In the first extraction of radium, Curie used the residues after extraction of uranium from pitchblende. The uranium had been extracted by dissolution in sulfuric acid leaving radium sulfate, which is similar to barium sulfate but even less soluble in the residues. The residues also contained rather substantial amounts of barium sulfate which thus acted as a carrier for the radium sulfate. The first steps of the radium extraction process involved boiling with sodium hydroxide, followed by hydrochloric acid treatment to minimize impurities of other compounds. The remaining residue was then treated with sodium carbonate to convert the barium sulfate into barium carbonate (carrying the radium), thus making it soluble in hydrochloric acid. After dissolution, the barium and radium were reprecipitated as sulfates; this was then repeated to further purify the mixed sulfate. Some impurities that form insoluble sulfides were removed by treating the chloride solution with hydrogen sulfide, followed by filtering. When the mixed sulfates were pure enough, they were once more converted to mixed chlorides; barium and radium thereafter were separated by fractional crystallisation while monitoring the progress using a spectroscope (radium gives characteristic red lines in contrast to the green barium lines), and the electroscope. via "Lateral Science" . lateralscience.blogspot.se. November 2012
After the isolation of radium by Marie and Pierre Curie from uranium ore from Jáchymov, several scientists started to isolate radium in small quantities. Later, small companies purchased mine tailings from Jáchymov mines and started isolating radium. In 1904, the Austrian government nationalization the mines and stopped exporting raw ore. Until 1912, when radium production increased, radium availability was low.
The formation of an Austrian monopoly and the strong urge of other countries to have access to radium led to a worldwide search for uranium ores. The United States took over as leading producer in the early 1910s, producing 70 g total from 1913 to 1920 in Pittsburgh alone.
The Curies' process was still used for industrial radium extraction in 1940, but mixed bromides were then used for the fractionation. If the barium content of the uranium ore is not high enough, additional barium can be added to carry the radium. These processes were applied to high grade uranium ores but may not have worked well with low grade ores. Small amounts of radium were still extracted from uranium ore by this method of mixed precipitation and ion exchange as late as the 1990s, but as of 2011, it is extracted only from spent nuclear fuel. Pure radium metal is isolated by reducing radium oxide with aluminium metal in a vacuum at 1,200 °C.
In 1954, the total worldwide supply of purified radium amounted to about .
Radium is also a promising candidate for trapped ion optical clocks. The radium ion has two subhertz-linewidth transitions from the ground state that could serve as the clock transition in an optical clock. A Ra+ trapped ion atomic clock has been demonstrated on the to transition, which has been considered for the creation of a transportable optical clock as all transitions necessary for clock operation can be addressed with direct diode lasers at common wavelengths.
Some of the few practical uses of radium are derived from its radioactive properties. More recently discovered , such as cobalt-60 and caesium-137, are replacing radium in even these limited uses because several of these isotopes are more powerful emitters, safer to handle, and available in more concentrated form.
The isotope Ra was approved by the United States Food and Drug Administration in 2013 for use in medicine as a cancer treatment of bone metastasis in the form of a solution including radium-223 chloride. The main indication of treatment is the therapy of Bone metastases from castration-resistant prostate cancer.
Radium was still used in 2007 as a radiation source in some industrial radiography devices to check for flawed metallic parts, similarly to X-ray imaging. When mixed with beryllium, radium acts as a neutron source.
Some of the biological effects of radium include the first case of "radium-dermatitis", reported in 1900, two years after the element's discovery. The French physicist Antoine Becquerel carried a small ampoule of radium in his waistcoat pocket for six hours and reported that his skin became ulcerated. Pierre Curie attached a tube filled with radium to his arm for ten hours, which resulted in the appearance of a skin lesion, suggesting the use of radium to attack cancerous tissue as it had attacked healthy tissue.
Handling of radium has been blamed for Marie Curie's death, due to aplastic anemia, though analysis of her levels of radium exposure done after her death find them within accepted safe levels and attribute her illness and death to her use of radiography. A significant amount of radium's danger comes from its daughter radon, which as a gas can enter the body far more readily than can its parent radium.
Exposure to radium is still regulated internationally by the ICRP, alongside the World Health Organization. The International Atomic Energy Agency (IAEA) publishes safety standards and provides recommendations for the handling of and exposure to radium in its works on naturally occurring radioactive materials and the broader International Basic Safety Standards, which are not enforced by the IAEA but are available for adoption by members of the organization. In addition, in efforts to reduce the quantity of old radiotherapy devices that contain radium, the IAEA has worked since 2022 to manage and recycle disused Ra sources.
In several countries, further regulations exist and are applied beyond those recommended by the IAEA and ICRP. For example, in the United States, the Environmental Protection Agency-defined Maximum Contaminant Level for radium is 5 pCi/L for drinking water;
at the time of the Manhattan Project in the 1940s, the "tolerance level" for workers was set at 0.1 micrograms of ingested radium.
The Occupational Safety and Health Administration does not specifically set exposure limits for radium, and instead limits ionizing radiation exposure in units of roentgen equivalent man based on the exposed area of the body. Radium sources themselves, rather than worker exposures, are regulated more closely by the Nuclear Regulatory Commission, which requires licensing for anyone possessing Ra with activity of more than 0.01 μCi. The particular governing bodies that regulate radioactive materials and nuclear energy are documented by the Nuclear Energy Agency for member countries for instance, in the Republic of Korea, the nation's radiation safety standards are managed by the Korea Radioisotope Institute, established in 1985, and the Korea Institute of Nuclear Safety, established in 1990 and the IAEA leads efforts in establishing governing bodies in locations that do not have government regulations on radioactive materials.
Chemistry
Compounds
Occurrence
History
Historical applications
Luminescent paint
Use in electron tubes
Quackery
Medical and research uses
Production
Modern applications
Hazards
Regulation
Notes
Bibliography
Further reading
External links
|
|