Luffa

 ( Cucurbitaceae Genera ) 

Luffa is a genus of tropical and subtropical in the pumpkin, squash and gourd family (Cucurbitaceae).

In everyday non-technical usage, the luffa, also spelled loofah or less frequently loofa, usually refers to the fruits of the species Luffa aegyptiaca and Luffa acutangula. It is cultivated and eaten as a vegetable, but must be harvested at a young stage of development to be edible. The vegetable is popular in India, China, Nepal, Bhutan, Bangladesh and Vietnam. When the fruit fully ripens, it becomes too fibrous for eating. The fully developed fruit is the source of the loofah scrubbing sponge.

---

Names The name luffa was taken by European botanists in the 17th century from the Arabic name لوف lūf.The plant name "luffa" was introduced to Western botany nomenclature by the botanist Johann Vesling (died 1649), who visited Egypt in the late–1620s and described the plant under cultivation with artificial irrigation in Egypt. In 1706 the botanist Joseph Pitton de Tournefort introduced the formal botany genus name "Luffa". Tournefort referred to Veslingius's earlier description and reiterated that "Luffa Arabum" is a plant from Egypt in the cucumber family. In establishing the genus Luffa, Tournefort identified just one member species and called it "Luffa Arabum". His 1706 article includes detailed drawings of this species (which is now called Luffa aegyptiaca). The species is native to tropical Asia but has been under cultivation in Egypt since late medieval times. The botanist Peter Forsskål visited Egypt in the early–1760s and noted that it was called ليف lūf in Arabic. In the 18th century the botanist Carl Linnaeus adopted the name luffa for this species but assigned it to the genus Momordica, and did not use a separate genus Luffa. More refs on Luffa in 18th century botanical nomenclature: "A commentary on Loureiro's "Flora Cochinchinensis" ", by E.D. Merrill, year 1935, in Transactions of American Philosophical Society volume 24 part 2, pp 377-378. Luffa @ ATILF and " Suite de l'Etablissement de Quelques Nouveaux Genres de Plantes", by J.P. de Tournefort (1706) in Mémoires de l'Academe Royale des Sciences année 1706.

In North America it is sometimes known as "Chinese okra", and in Spanish as estropajo.

---

Uses

---

Fibers The fruit section of L. aegyptiaca may be allowed to mature and used as a bath or kitchen sponge after being processed to remove everything except the network of xylem fibers. If the loofah is allowed to fully ripen and then dried on the vine, the flesh disappears, leaving only the fibrous skeleton and seeds, which can be easily shaken out. Marketed as luffa or loofah, the sponge is used as a body scrub in the shower.

In Paraguay, panels are made out of luffa combined with other vegetable matter and recycled plastic. These can be used to create furniture and construct houses. Recyclable Homes; 2008 Rolex Awards for Enterprise. Archived 2012-10-16 at the Wayback Machine.

---

Food Luffa is a popular food item. There are various ways to prepare it including in soups or stir frys.

---

Indian subcontinent In Hindi-speaking North India states, it is called torai (तोरई), and cooked as vegetable. In eastern-UP it is also called nenua while in central/Western India, specially in Madhya Pradesh, it is called gilki (गिल्की). Torai is reserved for ridge gourd and is less popular than gilki in central western India.

In Punjabi language-speaking Punjab, sponge gourd is called tori (ਤੋਰੀ), while ridged gourd is called ram tori (ਰਾਮ ਤੋਰੀ) and the fruit and flowers are mostly used in dishes.

In Bhojpuri speaking regions, it is called ghiura (घिउरा). Apart from the fruit of the vegetable, flowers are also used as a vegetable as chokha, tarua, pakoda, etc.

In Nepal and Nepali language speaking Indian states, sponge /smooth gourd is called ghiraula (घिरौंला), while the ridged variety is called pate ghiraula (पाटे घिरौंला). Both are popular vegetables usually cooked with tomatoes, potatoes and served with rice.

In Gujarat, ridge gourd and sponge gourd are known as turya (તુરીયા) and galka (ગલકા) in Gujarati respectively. Ridge gourd is called ghissori or ghissora (ઘિસ્સોરી/ઘિસ્સોરા) in Kutchi language. They are simple yet popular vegetables, usually made with a plentiful tomato gravy and garnished with green chillies and fresh coriander. When cooked roti is shredded by hand and mixed into it, it is colloquially known as "rotli shaak ma bhuseli". Alternatively, this dish is also eaten mixed with plain cooked rice.

In Bengali language-speaking Bangladesh and the Indian state of West Bengal, ridge gourd is called jhinge (ঝিঙ্গে), while sponge gourd is known as dhundhul (ধুঁধুল), both being popular vegetables. They are eaten, fried or cooked with shrimp, fish, or meat.

In the Odia language language of Odisha, ridge gourd (luffa acutangula) is known as janhi (ଜହ୍ନି), while sponge gourd (luffa aegyptiaca) is called tarada(ତରଡ଼ା), both accompanying many vegetarian and non-vegetarian dishes, most notably in dishes like "khira santula", where it is boiled with minuscule spices and simmered in milk. Another popular version involves mashing it in groundnut oil, herbs, peanuts and topping it with the peeled skin pieces.

In Assamese speaking areas of Assam, it is called bhula (ভোল, luffa aegyptiaca) and is cooked with sour fish curry along with taro. A related species is called jika (জিকা, Luffa acutangula), which is used as a vegetable in a curry, chutney and stir fry .

In Tamil language language of Tamil Nadu, Luffa acutangula (ridged gourd) is called peerkangai (பீர்க்கங்காய்) and Luffa aegyptiaca / Luffa cylindrica (sponge gourd) is called nurai peerkankai (நுரை பீர்க்கங்காய்) and are used as vegetables to make peerkangai kootu, poriyal, and thogayal. Even the skin is used to make chutney.

In Karnataka's Kannada language speaking areas, sponge gourd is better known as tuppa dahirekayi (ಟುಪ್ಪಾದ ಹೀರೆಕಾಯಿ), literally translating to "buttersquash" in English, while ridge gourd is known as hirekayi (ಹೀರೆಕಾಯಿ) in standard Kannada language. Naturally growing in this region, it's consumed when it is still tender and green. It is used as a vegetable in curries, but also as a snack, bhajji, dipped in chickpea batter and deep fried. In Tulu language, ridge gourd is known as Peere(ಪೀರೆ) and is used to prepare chutney and ajethna.

In both Telangana and Andhra Pradesh Telugu language dialects, ridge gourd is generally called beerakaya (బీరకాయ), while sponge gourd is called nethi beerakaya (సేతి బీరకాయ). It is used in making Dal, Fry, Roti Pacchadi, and wet curry.

In Malayalam language of Kerala, ridge gourd is commonly called peechinga (പീച്ചിങ്ങ) and poththanga in the Palakkad dialect, while sponge gourd is called Eeṇilla peechinga (ഏണില്ല പീച്ചിങ്ങ). It is also used as a vegetable, cooked with dal or stir fried. The fully matured fruit is used as a natural scrub in rural Kerala. In some places such as Wayanad, it grows as a creeper on fences.

In Marathi language-speaking Maharashtra, its called dodka (दोडका, ridge gourd luffa) and ghosaļ (घोसाळ ,smooth/sponge luffa) which are common vegetables, prepared with either crushed dried peanuts or with beans.

In Meitei language of Manipur, ridge gourd is called sebot (ꯁꯦꯕꯣꯠ) and sponge gourd is called sebot hekpa (ꯁꯦꯕꯣꯠ ꯍꯦꯀꯞ), which is cooked with other ingredients like potato, dried fish, fermented fish and served. They are also steamed before consuming or crushed (ironba) with other ingredients and served with steamed rice ( chaak). Fried ones (kaanghou) are also favorites for many. Sebot is also eaten as a green vegetable.

---

Other Asian cuisines In Sri Lanka, it's called වැටකොළු (Waeṭakola, the Luffa acutangula variety) in Sinhalese and is a common ingredient in curries, even in dried forms.

In Vietnamese cuisine, the gourd is called " mướp hương" and is a common ingredient in soups and stir-fried dishes.

In China and Taiwan (where it is called p=sīguā, or in English, "silk melon"), Indonesia (where it is called oyong), and the Philippines (where it is called patola in Tagalog language and kabatiti in Ilokano language), in Timor-Leste it is also called "patola" or "batola" in Tetum language and in Manipur, India, (where it is called sebot) the luffa is eaten as a green vegetable in various dishes.

In Japan it is called hechima (へちま) and is cultivated all over the country during summer. It is commonly used as a green vegetable in traditional dishes of the Ryukyu Islands (where it is called naabeeraa). In other regions it is also grown for uses other than food.

In Nepal it is called ghiraula and consumed as a vegetable at a young age. When it becomes ripe and dried, it is used as a body scrubbing material during bathing.

---

Western cuisines Luffa is also known as "Chinese okra" in Canada and the U.S.

---

Other uses In Japan, in regions other than the Ryukyu Islands and Kyushu, it is known as hechima, and is predominantly grown for use as a sponge or for applying soap, shampoo, and lotion. As with bitter melon, many people grow it outside building windows as a natural sunscreen in summer.

---

Role in food chain Luffa species are used as food plants by the of some Lepidoptera species, including Hypercompe albicornis and Zeugodacus tau.

---

Mechanical properties The luffa sponge is a Biology cellular material. These materials often exhibit exceptional mechanical properties at low Density. While their mechanical performance tends to fall behind manmade materials, such as , , , and composites, as a structural material, they have long term sustainability for the natural environment. When compressed longitudinally, a luffa sponge is able to absorb comparable energy per unit mass as Metal foam. Luffa sponges are composed of a complex network of fiber bundles connected to form a 3-dimensional, highly-Porosity network. The hierarchical structure of luffa sponges results in mechanical properties that vary with the component of sponge tested. Specifically, the mechanical properties of fiber bundles differ from those of blocks from the bulk of the sponge, which differ from those of the cross sections of the entire sponge.

---

Fiber-bundles

Tensile testing of fiber bundles isolated from the inner surface provide insight this basic strut element of the luffa sponges. These fiber bundles vary in diameter from 0.3 to 0.5 mm. Each fiber bundle has a low density core region not occupied by fibers. The stress-strain response of the fiber bundles is nearly linear elastic all the way until fracture, suggesting the absence of work hardening. The slope of the Linearity region of the stress-strain curve, or Young’s modulus, is 236* MPa. The highest stress achieved before fracture, or ultimate tensile strength, is 103 MPa. The strain at which failure occurs, or failure strain, is small at only 5%. The mechanical properties of fiber bundles decrease dramatically when the size of the hollow region inside the bundle increases. Despite their low tensile strength, the fiber bundles have a high specific modulus of 2.07– 4.05 MPa⋅m³/kg, and their overall properties are improved when a high ratio of their cross sectional area is occupied by fibers, they are evenly distributed, and there is strong adhesion between fibers.

---

Bulk-sponge

Block samples (height: 12.69 ± 2.35mm, width: 11.30 ± 2.88mm, length: 13.10 ± 2.64mm) cut from the core region and hoop region of the luffa sponge exhibit different mechanical behaviors under compression depending on both the orientation they are loaded in as well as the location in the sponge they are sampled from. The hoop region consists of the section of sponge located around the outside between the inner and outer surfaces, while the core region is from the sponge center. Samples from both the hoop and core regions exhibited yielding when compressed in the longitudinal direction due to the buckling of fibers. With the highly aligned fibers from the inner surface removed from the hoop region block samples, this yield behavior disappears. In general, the inner surface fibers most significantly impact the longitudinal properties of the luffa sponge column followed by the Circumference properties. There is no noticeable contribution to the Radius properties. Additionally, the core region exhibits lower yield stress and energy absorption (as determined by the area under the stress-strain curve) compared to the hoop region due to its greater porosity.

Overall, the stress-strain curves of block samples exhibit three stages of mechanical behavior common to porous materials. Namely, the samples follow linear elasticity for strains less than 10%, followed by a plateau for strains from 10% to 60%, and finally a stress increase associated with densification at strains greater than 60%. Segment samples created from cross sections of the entire luffa sponge (diameter: 92.51 ± 6.15mm, height: 19.76 ± 4.95mm) when tested in compression exhibit this same characteristic behavior. The three stages can be described by the equations:

1. Linear elasticity region: $\backslash sigma=E^*\backslash varepsilon$

for $\backslash varepsilon\backslash le\backslash varepsilon\_e$

1. Plateau region: $\backslash sigma=\backslash sigma\_p^*$ for
2. Densification region: $\backslash sigma=\backslash sigma\_p^*/D\{(\backslash varepsilon\_D/\backslash varepsilon\_D-\backslash varepsilon)\}^m$ for $\backslash varepsilon>\backslash varepsilon\_D(1-1/D)$

In the above equations, $E^*$ is the Young's modulus and $\backslash sigma\_p^*$ the yield strength of the sponge material. These are chosen to best fit experimental data. The strain at the elastic limit, where the plateau region begins, is denoted as $\backslash varepsilon\_e$, while the strain at the onset of the densification region is $\backslash varepsilon\_D$.

$\backslash varepsilon\_D=1-1.4(\backslash rho^*/\backslash rho\_s)$

Here $\backslash rho^*$ is the density of the bulk sponge $\backslash rho\_s$ is the density of its constituent, the fiber bundle. The constant D defines the strain at the onset of densification as well as the stress relationship in the densification region. It is determined by fitting experimental data.

---

Dynamic loading

The mechanical properties of Luffa sponges change under different . Specifically, energy adsorption, compressive stress, and plateau stress (which is in the case of foam materials corresponds to the yield stress) are enhanced by increasing the strain rate. One explanation for this is that the luffa fibers undergo more axial deformation when dynamically loaded (high strain rates) than when quasi-statically loaded (low strain rates).

==Gallery==

(1804)]]

and Oecophylla smaragdina ants]]

]]

'' sponge section magnified 100 times]]

---

External links

• Multilingual taxonomic information from the University of Melbourne

Categories: Cucurbitaceae Genera, Cucurbitoideae, Fruit Vegetables, Taxa Named By Philip Miller

Post Comment