Product Code Database
Example Keywords: shoes -gran $68-126
   » Wiki: Tuff
Tag Wiki 'Tuff'.
Tag

Tuff is a type of rock made of ejected from a during a volcanic eruption. Following ejection and deposition, the ash into solid rock.

(1984). 9783540127567, Springer-Verlag.
(2025). 9783540436508, Springer.
Rock that contains greater than 75% ash is considered tuff, while rock containing 25% to 75% ash is described as tuffaceous (for example, tuffaceous sandstone). A containing 25–75% or is called tuff breccia. Tuff composed of sandy volcanic material can be referred to as volcanic sandstone.

Tuff is a relatively soft rock, so it has been used for construction since ancient times. Because it is common in Italy, the Romans used it often for construction. The Rapa Nui people used it to make most of the statues on .

(2025). 9783732902651

Tuff can be classified as either or . It is usually studied in the context of igneous , although it is sometimes described using terms.

Tuff is often erroneously called tufa in guidebooks and in television programs, but is a form of .


Volcanic ash
The material that is expelled in a volcanic eruption can be classified into three types:

  1. , a mixture made mostly of , , and a sulfur compound (either , SO2, or , H2S, depending on the temperature)
  2. , the name of when it emerges and flows over the surface
  3. , particles of solid material of all shapes and sizes ejected and thrown through the air

Tephra is made when magma inside the volcano is blown apart by the rapid expansion of hot volcanic gases. Magma commonly explodes as the gas dissolved in it comes out of solution as the pressure decreases . These violent explosions produce particles of material that can then fly from the volcano. Solid particles smaller than 2 mm in diameter ( or smaller) are called volcanic ash.

Volcanic ash is further divided into fine ash, with particle sizes smaller than 0.0625 mm in diameter, and coarse ash, with particle sizes between 0.0625 mm and 2 mm in diameter. Tuff is correspondingly divided into coarse tuff (coarse ash tuff) and fine tuff (fine ash tuff or dust tuff). Consolidated tephra composed mostly of coarser particles is called lapillistone (particles 2 mm to 64 mm in diameter) or agglomerate or pyroclastic (particles over 64 mm in diameter) rather than tuff.

Volcanic ash can vary greatly in composition, and so tuffs are further classified by the composition of the ash from which they formed. Ash from high-silica volcanism, particularly in ash flows, consists mainly of shards of ,

(1996). 9780716724384, W. H. Freeman.
and tuff formed predominantly from glass shards is described as vitric tuff. The glass shards are typically either irregular in shape or are roughly triangular with convex sides. They are the shattered walls of countless small bubbles that formed in the magma as dissolved gases rapidly came out of solution.

Tuffs formed from ash consisting predominantly of individual crystals are described as crystal tuffs, while those formed from ash consisting predominantly of pulverized rock fragments are described as lithic tuffs.

The chemical composition of volcanic ash reflects the entire range of volcanic rock chemistry, from high-silica ash to low-silica ash, and tuffs are likewise described as rhyolitic, andesitic, basaltic, and so on.


Transport and lithification
The most straightforward way for volcanic ash to move away from the vent is as ash clouds that are part of an . These fall to the surface as fallout deposits that are characteristically well-sorted and tend to form a blanket of uniform thickness across terrain. results in a more spectacular and destructive form of transport, which takes the form of pyroclastic flows and surges that characteristically are poorly sorted and pool in low terrain. Surge deposits sometimes show sedimentary structures typical of high-velocity flow, such as and .
(2025). 9780521880060, Cambridge University Press.
Volcanic ash already deposited on the surface can be transported as mud flows () when mingled with water from rainfall or through eruption into a body of water or ice.

Particles of volcanic ash that are sufficiently hot will weld together after settling to the surface, producing a welded tuff. Welding requires temperatures in excess of . If the rock contains scattered, pea-sized fragments or in it, it is called a welded . Welded tuffs (and welded lapilli tuffs) can be of fallout origin, or deposited from ash flows, as in the case of . During welding, the glass shards and pumice fragments adhere together (necking at point contacts), deform, and compact together, resulting in a eutaxitic fabric. Welded tuff is commonly rhyolitic in composition, but examples of all compositions are known.

A sequence of ash flows may consist of multiple cooling units. These can be distinguished by the degree of welding. The base of a cooling unit is typically unwelded due to chilling from the underlying cold surface, and the degree of welding and of secondary reactions from fluids in the flow increases upwards towards the center of the flow. Welding decreases towards the top of the cooling unit, where the unit cools more rapidly. The intensity of welding may also decrease towards areas in which the deposit is thinner, and with distance from source.

Cooler pyroclastic flows are unwelded and the ash sheets deposited by them are relatively unconsolidated. However, cooled volcanic ash can quickly become lithified because it usually has a high content of volcanic glass. This is a thermodynamically unstable material that reacts rapidly with groundwater or seawater, which leaches and from the glass. New minerals, such as , , and , crystallize from the dissolved substances and cement the tuff.

Tuffs are further classified by their depositional environment, such as lacustrine tuff, subaerial tuff, or submarine tuff, or by the mechanism by which the ash was transported, such as fallout tuff or ash flow tuff. Reworked tuffs, formed by erosion and redeposition of ash deposits, are usually described by the transport agent, such as aeolian tuff or fluvial tuff.

File:Volcanic Ash Fall Layers Izu Oshima Japan 1.jpg|Layers of fallout tuff in Japan File:BishopTuff.jpg|Rocks from the in : unwelded with on left, welded with on right File:Bandelier Tuff San Diego Canyon.jpg|Bandelier Tuff at San Diego Canyon, New Mexico, US. The lower Otowi Member is a single massive cooling unit, while the upper Tshirege Member is composed of multiple cooling units.


Occurrences
Tuffs have the potential to be deposited wherever explosive volcanism takes place, and so have a wide distribution in location and age.


High-silica volcanism
Rhyolite tuffs contain pumiceous, glassy fragments and small scoriae with , , , etc. Iceland, Lipari, Hungary, the Basin and Range of the American southwest, and are among the areas where such tuffs are prominent. In the ancient rocks of , , etc., similar tuffs are known, but in all cases, they are greatly changed by silicification (which has filled them with , , and quartz) and by devitrification. The frequent presence of rounded corroded quartz crystals, such as occur in rhyolitic lavas, helps to demonstrate their real nature.

Welded ignimbrites can be highly voluminous, such as the Lava Creek Tuff erupted from Yellowstone Caldera in 631,000 years ago. This tuff had an original volume of at least . Lava Creek tuff is known to be at least 1,000 times as large as the deposits of the 1980 eruption of Mount St. Helens, and it had a Volcanic Explosivity Index (VEI) of 8, greater than any eruption known in the last 10,000 years. Ash flow tuffs cover of the of and about of . Ash flow tuffs are the only volcanic product with volumes rivaling those of .

The Tioga Bentonite of the northeastern United States varies in composition from crystal tuff to tuffaceous shale. It was deposited as ash carried by wind that fell out over the sea and settled to the bottom. It is in age and likely came from a vent in central , where the tuff reaches its maximum thickness of about .


Alkaline volcanism
Trachyte tuffs contain little or no quartz, but much or and sometimes oligoclase feldspar, with occasional biotite, augite, and hornblende. In weathering, they often change to soft red or yellow , rich in with secondary quartz. Recent trachyte tuffs are found on the (at ),
(1983). 9783642692215
in and near . Trachyte-carbonatite tuffs have been identified in the East African Rift. Alkaline crystal tuffs have been reported from Rio de Janeiro.


Intermediate volcanism
Andesitic tuffs are exceedingly common. They occur along the whole chain of the Cordilleras and , in the , New Zealand, Japan, etc. In the , North Wales, Lorne, the , the , and many other districts of , ancient rocks of exactly similar nature are abundant. In color, they are red or brown; their scoriae fragments are of all sizes from huge blocks down to minute granular dust. The cavities are filled with many secondary minerals, such as , , quartz, , or chalcedony; in microscopic sections, though, the nature of the original lava can nearly always be made out from the shapes and properties of the little crystals which occur in the decomposed glassy base. Even in the smallest details, these ancient tuffs have a complete resemblance to the modern ash beds of , , and Mont Pelé.


Mafic volcanism
Mafic volcanism typically takes the form of Hawaiian eruptions that are nonexplosive and produce little ash.
(1983). 9780824808327, University of Hawaii Press.
However, interaction between basaltic magma and groundwater or seawater results in hydromagmatic explosions that produce abundant ash. These deposit ash cones that subsequently can become cemented into tuff cones. Diamond Head, Hawaii, is an example of a tuff cone, as is the island of Ka'ula. The glassy basaltic ash produced in such eruptions rapidly alters to as part of the process of lithification.

Although conventional mafic volcanism produce little ash, such ash as is formed may accumulate locally as significant deposits. An example is the Pahala ash of Hawaii island, which locally is as thick as . These deposits also rapidly alter to palagonite, and eventually weather to .

Basaltic tuffs are also found in , Skye, Mull, and other places, where volcanic rocks are found; in Scotland, , and Ireland among the strata, and among the still older rocks of the Lake District, the southern uplands of Scotland, and Wales. They are black, dark green, or red in colour; vary greatly in coarseness, some being full of round spongy bombs a foot or more in diameter; and being often submarine, may contain shale, sandstone, grit, and other sedimentary material, and are occasionally fossiliferous. Recent basaltic tuffs are found in , the , , Sicily, the , , etc. When weathered, they are filled with calcite, chlorite, , and especially where the lavas contain or , are often rich in , such as , , , , , , etc.


Ultramafic volcanism
Ultramafic tuffs are extremely rare; their characteristic is the abundance of or serpentine and the scarcity or absence of and .


Kimberlites
Occurrences of ultramafic tuff include surface deposits of at in the -fields of southern Africa and other regions. The principal variety of kimberlite is a dark bluish-green, serpentine-rich breccia (blue-ground) which, when thoroughly oxidized and weathered, becomes a friable brown or yellow mass (the "yellow-ground"). These breccias were emplaced as gas–solid mixtures and are typically preserved and mined in that form intrusive pipe-like structures. At depth, some kimberlite breccias grade into root zones of dikes made of unfragmented rock. At the surface, ultramafic tuffs may occur in maar deposits. Because kimberlites are the most common igneous source of diamonds, the transitions from maar to diatreme to root-zone dikes have been studied in detail. Diatreme- kimberlite is more properly called an ultramafic breccia rather than a tuff.


Komatiites
tuffs are found, for example, in the of Canada and South Africa.


Folding and metamorphism
In course of time, changes other than weathering may overtake tuff deposits. Sometimes, they are involved in folding and become sheared and cleaved. Many of the green of the English Lake District are finely cleaved ashes. In also, the tuffs are slaty and cleaved. The green color is due to the large development of chlorite. Among the crystalline of many regions, green beds or green schists occur, which consist of quartz, hornblende, chlorite or biotite, , feldspar, etc., and are probably recrystallized or tuffs. They often accompany masses of epidiorite and hornblende – schists which are the corresponding lavas and sills. Some chlorite-schists also are probably altered beds of volcanic tuff. The "Schalsteins" of and Germany include many cleaved and partly recrystallized ash-beds, some of which still retain their fragmental structure, though their lapilli are flattened and drawn out. Their steam cavities are usually filled with calcite, but sometimes with quartz. The more completely altered forms of these rocks are platy, green chloritic schists; in these, however, structures indicating their original volcanic nature only sparingly occur. These are intermediate stages between cleaved tuffs and crystalline schists.


Importance
The primary economic value of tuff is as a building material. In the ancient world, tuff's relative softness meant that it was commonly used for construction where it was available.


Italy
Tuff is common in Italy, and the used it for many buildings and bridges. For example, the whole port of the island of (still in use), was carved from tuff. The , built to defend the city of in the fourth century BC, is also built almost entirely from tuff. The Romans also cut tuff into small, rectangular stones that they used to create walls in a pattern known as .Giavarini, Carlo, A. Samueli Ferretti, and Maria Laura Santarelli. 2006. "Mechanical characteristics of Roman 'opus caementicium'". Fracture and Failure of Natural Building Stones. Applications in the Restoration of Ancient Monuments. pp. 108, 110

has been used in Rome and Naples as a building stone, is a tuff. also is a decomposed tuff, but of basic character, originally obtained near and used as a , but this name is now applied to a number of substances not always of identical character. In the historical architecture of Naples, Neapolitan yellow tuff is the most used building material. tuff was also used widely in Naples and Campania.


Germany
In the region of Germany, a trachytic, pumiceous tuff called has been extensively worked as a hydraulic mortar. Tuff of the Eifel region of has been widely used for construction of railroad stations and other buildings in Frankfurt, Hamburg, and other large cities. Construction using the Porphyr, can be seen in the -style sculpted portal outside the chapel entrance in .: Handbuch der deutschen Kunstdenkmäler, Sachsen II. Deutscher Kunstverlag, München, Berlin 1998, p. 160 The trade name Rochlitz Porphyr is the traditional designation for a of with an architectural history over 1,000 years in Germany. The quarries are located near Rochlitz.Heiner Siedel: Sächsische „Porphyrtuffe" aus dem Rotliegend als Baugesteine: Vorkommen und Abbau, Anwendung, Eigenschaften und Verwitterung. In: Institut für Steinkonservierung e. V. Bericht Nr. 22, 2006, p. 47-58.


United States
Yucca Mountain nuclear waste repository, a U.S. Department of Energy terminal storage facility for spent nuclear reactor and other radioactive waste, is in tuff and ignimbrite in the Basin and Range Province in . In and , , areas made of tuff are routinely excavated for storage of wine barrels.


Rapa Nui
Tuff from Rano Raraku was used by the Rapa Nui people of Easter Island to make the vast majority of their famous statues.

File:Easter-Island.jpg| on Easter Island, with 15 made of tuff from crater: The second moai from the right has a ("topknot") which is made of red . Image:20090513090DR Colditz Schloß Portal Kirchenhaus.jpg|The rhyolitic tuff portal of the "church house" at , Saxony, designed by Andreas Walther II (1584)


Armenia
Tuff is used extensively in and Armenian architecture.
(2025). 9781841621630, Bradt Travel Guides. .
It is the dominant type of stone used in construction in Armenia's capital , , Armenia's second largest city, and , the country's medieval capital, now in Turkey. A small village in Armenia was renamed (literally "built of tuff") in 1946.

File:Yerevan-Republic_Square-12-Government-2019-gje.jpg|Armenia's Government House in Yerevan's Republic Square, built of yellow tuff File:Holy_Saviour%27s_Church,_Gyumri.jpg|Holy Saviour's Church in Gyumri, built mainly of black tuff File:Ani-Cathedral, Ruine.jpeg|Cathedral of Ani, early 11th century, in the medieval Armenian capital of (modern-day Turkey) was built in tuff.


Tephrochronology
Tuffs are deposited geologically instantaneously and often over a large region. This makes them highly useful as time-stratigraphic markers. The use of tuffs and other tephra deposits in this manner is known as tephrochronology and is particularly useful for chronostratigraphy. Individual tuff beds can be "fingerprinted" by their chemical composition and phenocryst assemblages.Philpotts and Ague 2009, p. 74 Absolute ages for tuff beds can be determined by , Ar-Ar, or carbon-14 dating. grains found in many tuffs are highly durable and can survive even metamorphism of the host tuff to schist, allowing absolute ages to be assigned to ancient metamorphic rocks. For example, dating of zircons in a metamorphosed tuff bed in the provided some of the first evidence for the .


Etymology
The word tuff is derived from the tufo.


See also


External links
Page 1 of 1
1
Page 1 of 1
1

Account

Social:
Pages:  ..   .. 
Items:  .. 

Navigation

General: Atom Feed Atom Feed  .. 
Help:  ..   .. 
Category:  ..   .. 
Media:  ..   .. 
Posts:  ..   ..   .. 

Statistics

Page:  .. 
Summary:  .. 
1 Tags
10/10 Page Rank
5 Page Refs
1s Time