Product Code Database
Boron is a chemical element; it has Chemical symbol B and atomic number 5. In its crystalline form it is a brittle, dark, lustrous metalloid; in its Amorphous solid form it is a brown powder. As the lightest element of the boron group it has three for forming , resulting in many compounds such as boric acid, the mineral borax, and the ultra-hard crystals of boron carbide and boron nitride.
Boron is synthesized entirely by cosmic ray spallation and and not by stellar nucleosynthesis, so it is a low-abundance element in the Solar System and in the Earth's crust. It constitutes about 0.001 percent by weight of Earth's crust. It is concentrated on Earth by the water-solubility of its more common naturally occurring compounds, the . These are mined industrially as , such as borax and kernite. The largest known deposits are in Turkey, the largest producer of boron minerals.
Elemental boron is found in small amounts in , but chemically uncombined boron is not otherwise found naturally on Earth.
Several allotropes exist: Amorphous solid boron is a brown powder; crystalline boron is silvery to black, extremely hard (9.3 on the Mohs scale), and a poor electrical conductor at room temperature (1.5 × 10−6 Ω−1 cm−1 room temperature electrical conductivity). The primary use of the element itself is as Boron fiber with applications similar to carbon fibers in some high-strength materials.
Boron is primarily used in chemical compounds. About half of all production consumed globally is an additive in fiberglass for insulation and structural materials. The next leading use is in and in high-strength, lightweight structural and Refractory materials. Borosilicate glass is desired for its greater strength and thermal shock resistance than ordinary soda lime glass. As sodium perborate, it is used as a bleach. A small amount is used as a dopant in , and reagent intermediates in the synthesis of organic fine chemicals. A few boron-containing organic pharmaceuticals are used or are in study. Natural boron is composed of two stable isotopes, one of which (boron-10) has a number of uses as a neutron-capturing agent.
have low toxicity in mammals (similar to Salt) but are more toxic to and are occasionally used as . Boron-containing organic antibiotics are known. Although only traces are required, it is an essential plant nutrition.
Borax in its mineral form (then known as tincal) first saw use as a glaze, beginning in China circa 300 AD. Some crude borax traveled westward, and was apparently mentioned by the alchemist Jabir ibn Hayyan around 700 AD. Marco Polo brought some glazes back to Italy in the 13th century. Georgius Agricola, in around 1600, reported the use of borax as a flux in metallurgy. In 1777, boric acid was recognized in the hot springs (soffioni) near Florence, Italy, at which point it became known as sal sedativum, with ostensible medical benefits. The mineral was named sassolite, after Sasso Pisano in Italy. Sasso was the main source of borax from 1827 to 1872, when United States sources replaced it. Boron compounds were rarely used until the late 1800s when Francis Marion Smith's Pacific Coast Borax Company first popularized and produced them in volume at low cost.Hildebrand, G. H. (1982) "Borax Pioneer: Francis Marion Smith." San Diego: Howell-North Books. p. 267
Boron was not recognized as an element until it was isolated by Sir Humphry Davy and by Joseph Louis Gay-Lussac and Louis Jacques Thénard. In 1808 Davy observed that electric current sent through a solution of borates produced a brown precipitate on one of the electrodes. In his subsequent experiments, he used potassium to Reducing agent boric acid instead of electrolysis. He produced enough boron to confirm a new element and named it boracium. Gay-Lussac and Thénard used iron to reduce boric acid at high temperatures. By oxidizing boron with air, they showed that boric acid is its oxidation product. Jöns Jacob Berzelius identified it as an element in 1824.Berzelius produced boron by reducing a borofluoride salt; specifically, by heating potassium borofluoride with potassium metal. See: Berzelius, J. (1824) "Undersökning af flusspatssyran och dess märkvärdigaste föreningar" (Part 2) (Investigation of hydrofluoric acid and of its most noteworthy compounds), Kongliga Vetenskaps-Academiens Handlingar (Proceedings of the Royal Science Academy), vol. 12, pp. 46–98; see especially pp. 88ff. Reprinted in German as: Berzelius, J. J. (1824) "Untersuchungen über die Flußspathsäure und deren merkwürdigste Verbindungen" , Poggendorff's Annalen der Physik und Chemie, vol. 78, pages 113–150. Pure boron was arguably first produced by the American chemist Ezekiel Weintraub in 1909.
The exotic 17B exhibits a nuclear halo, i.e. its radius is appreciably larger than that predicted by the liquid drop model.
Some early routes to elemental boron involved the reduction of boric oxide with metals such as magnesium or aluminium. However, the product was often contaminated with of those metals. Pure boron can be prepared by reducing volatile boron halides with hydrogen at high temperatures. Ultrapure boron for use in the semiconductor industry is produced by the decomposition of diborane at high temperatures and then further purified by the zone melting or Czochralski processes.
Since elemental boron is very rare, its chemical reactions are of little significance practically speaking. The elemental form is not typically used as a precursor to compounds. Instead, the extensive inventory of boron compounds are produced from borates.
When exposed to air, under normal conditions, a protective oxide or hydroxide layer forms on the surface of boron, which prevents further corrosion. The rate of oxidation of boron depends on the crystallinity, particle size, purity and temperature. At higher temperatures boron burns to form boron trioxide:
Boron compounds often violate the octet rule.
The trihalides adopt a planar trigonal structures, in contrast to the behavior of aluminium trihalides. All charge-neutral boron halides violate the octet rule, hence they typically are . For example, boron trifluoride (BF3) combines eagerly with fluoride sources to give the tetrafluoroborate anion, BF4−. Boron trifluoride is used in the petrochemical industry as a catalyst. The halides react with water to form boric acid. Other boron halides include those with B-B bonding, such as B2F4 and B4Cl4.
As illustrated by the preceding examples, borate anions tend to condense by formation of B-O-B bonds. Borosilicates, with B-O-Si, and borophosphates, with B-O-P linkages, are also well represented in both minerals and synthetic compounds.
Related to the oxides are the and with the formula B(OR)3 and R2BOH, respectively. Boron forms a wide variety of such metal-organic compounds, some of which are used in the synthesis of pharmaceuticals. These developments, especially the Suzuki reaction, was recognized with the 2010 Nobel Prize in Chemistry to Akira Suzuki.
Sodium borohydride converts to diborane by treatment with boron trifluoride:
Pyrolysis of diborane gives boron hydride clusters, such as pentaborane(9) and decaborane . A large number of anionic boron hydrides are also known, e.g. [dodecaborate|[B12H122−]]. In these , boron has a coordination number greater than four. The analysis of the bonding in these polyhedra clusters earned William N. Lipscomb the 1976 Nobel Prize in Chemistry for "studies on the structure of boranes illuminating problems of chemical bonding". Not only are their structures unusual, many of the boranes are extremely reactive. For example, a widely used procedure for pentaborane states that it will "spontaneously inflame or explode in air".
Hydroboration opened the doors for many subsequent reactions, several of which are useful in the synthesis of complex organic compounds. The significance of these methods was recognized by the award of Nobel Prize in Chemistry to H. C. Brown in 1979. Even complicated boron hydrides, such as decaborane undergo hydroboration. Like the volatile boranes, the alkyl boranes ignite spontaneously in air.
In the 1950s, several studies examined the use of boranes as energy-increasing "Zip fuel" additives for jet fuel.
Triorganoboron(III) compounds are trigonal planar and exhibit weak . The resulting adducts are tetrahedral. This behavior contrasts with that of triorganoaluminium compounds (see trimethylaluminium), which are tetrahedral with bridging alkyl groups.
A compound with the B≡C triple bond was synthesized for the first time in 2025.
Boron carbide's structure is only approximately reflected in its formula of B4C, and it shows a clear depletion of carbon from this suggested stoichiometric ratio. This is due to its very complex structure. The substance can be seen with empirical formula B12C3 (i.e., with B12 dodecahedra being a motif), but with less carbon, as the suggested C3 units are replaced with C-B-C chains, and some smaller (B6) octahedra are present as well (see the boron carbide article for structural analysis). The repeating polymer plus semi-crystalline structure of boron carbide gives it great structural strength per weight.
In the high oxygen environment of the Earth's surface, boron is always found fully oxidized to borate. Boron does not appear on Earth in elemental form. Extremely small traces of elemental boron were detected in Lunar regolith.Mokhov, A.V., Kartashov, P.M., Gornostaeva, T.A., Asadulin, A.A., Bogatikov, O.A., 2013: Complex nanospherulites of zinc oxide and native amorphous boron in the Lunar regolith from Mare Crisium. Doklady Earth Sciences 448(1) 61–63Mindat, http://www.mindat.org/min-43412.html
Although boron is a relatively rare element in the Earth's crust, representing only 0.001% of the crust mass, it can be highly concentrated by the action of water, in which many borates are soluble. It is found naturally combined in compounds such as borax and boric acid (sometimes found in volcano spring waters). About a hundred borate minerals are known.
Turkey and the United States are the largest producers of boron products. Turkey produces about half of the global yearly demand, through Eti Mine Works () a Turkey state-owned mining industry and chemicals company focusing on boron products. It holds a government monopoly on the mining of borate minerals in Turkey, which possesses 72% of the world's known deposits. In 2012, it held a 47% market share of production of global borate minerals, ahead of its main competitor, Rio Tinto Group.
Almost a quarter (23%) of global boron production comes from the Rio Tinto Borax Mine (also known as the U.S. Borax Boron Mine) near Boron, California.
Estimated global consumption of boron (almost entirely as boron compounds) was about 4 million tonnes of B2O3 in 2012. As compounds such as borax and kernite its cost was US$377/tonne in 2019.
Increasing demand for boric acid has led a number of producers to invest in additional capacity. Turkey's state-owned Eti Mine Works opened a new boric acid plant with the production capacity of 100,000 tonnes per year at Emet in 2003. Rio Tinto Group increased the capacity of its boron plant from 260,000 tonnes per year in 2003 to 310,000 tonnes per year by May 2005, with plans to grow this to 366,000 tonnes per year in 2006. Chinese boron producers have been unable to meet rapidly growing demand for high quality borates. This has led to imports of sodium tetraborate (borax) growing by a hundredfold between 2000 and 2005 and boric acid imports increasing by 28% per year over the same period.
The rise in global demand has been driven by high growth rates in glass fiber, fiberglass and borosilicate glassware production. A rapid increase in the manufacture of reinforcement-grade boron-containing fiberglass in Asia, has offset the development of boron-free reinforcement-grade fiberglass in Europe and the US. The recent rises in energy prices may lead to greater use of insulation-grade fiberglass, with consequent growth in the boron consumption. Roskill Consulting Group forecasts that world demand for boron will grow by 3.4% per year to reach 21 million tonnes by 2010. The highest growth in demand is expected to be in Asia where demand could rise by an average 5.7% per year.
Because of the ubiquitous use of fiberglass in construction and insulation, boron-containing fiberglasses consume over half the global production of boron, and are the single largest commercial boron market.
Boron fibers and sub-millimeter sized crystalline boron springs are produced by laser-assisted chemical vapor deposition. Translation of the focused laser beam allows production of even complex helical structures. Such structures show good mechanical properties (elastic modulus 450 GPa, fracture strain 3.7%, fracture stress 17 GPa) and can be applied as reinforcement of ceramics or in micromechanical systems.
Boron can also increase the surface hardness of steels and alloys through boriding. Additionally metal are used for coating tools through chemical vapor deposition or physical vapor deposition. Implantation of boron ions into metals and alloys, through ion implantation or ion beam deposition, results in a spectacular increase in surface resistance and microhardness. Laser alloying has also been successfully used for the same purpose. These borides are an alternative to diamond coated tools, and their (treated) surfaces have similar properties to those of the bulk boride.
For example, rhenium diboride can be produced at ambient pressures, but is rather expensive because of rhenium. The hardness of ReB2 exhibits considerable anisotropy because of its hexagonal layered structure. Its value is comparable to that of tungsten carbide, silicon carbide, titanium diboride or zirconium diboride. Similarly, AlMgB14 + TiB2 composites possess high hardness and wear resistance and are used in either bulk form or as coatings for components exposed to high temperatures and wear loads.
Sodium perborate serves as a source of active oxygen in many , laundry detergents, , and laundry bleaches. However, despite its name, "Borateem" laundry bleach no longer contains any boron compounds, using sodium percarbonate instead as a bleaching agent.
In pressurized water reactors a variable concentration of boronic acid in the cooling water is used as a neutron poison to compensate the variable reactivity of the fuel. When new rods are inserted the concentration of boronic acid is maximal, and is reduced during the lifetime.
Boric acid has antiseptic, antifungal, and antiviral properties and, for these reasons, is applied as a water clarifier in swimming pool water treatment. Mild solutions of boric acid have been used as eye antiseptics.
Bortezomib (marketed as Velcade and Cytomib). Boron appears as an active element in the organic pharmaceutical bortezomib, a new class of drug called the proteasome inhibitor, for treating myeloma and one form of lymphoma (it is currently in experimental trials against other types of lymphoma). The boron atom in bortezomib binds the catalytic site of the proteasome with high affinity and specificity.
Tavaborole (marketed as Kerydin) is an Aminoacyl tRNA synthetase inhibitor which is used to treat toenail fungus. It gained FDA approval in July 2014.
Dioxaborolane chemistry enables radioactive fluoride (18F) labeling of Antibody or red blood cells, which allows for positron emission tomography (PET) imaging of cancer and hemorrhages, respectively. A Human-Derived, Genetic, Positron-emitting and Fluorescent (HD-GPF) reporter system uses a human protein, PSMA and non-immunogenic, and a small molecule that is positron-emitting (boron bound 18F) and fluorescence for dual modality PET and fluorescent imaging of genome modified cells, e.g. cancer, CRISPR/Cas9, or CAR-T cell-cells, in an entire mouse. The dual-modality small molecule targeting PSMA was tested in humans and found the location of primary and Metastasis prostate cancer, fluorescence-guided removal of cancer, and detects single cancer cells in tissue margins.
Enriched boron or 10B is used in both radiation shielding and is the primary nuclide used in neutron capture therapy of cancer. In the latter ("boron neutron capture therapy" or BNCT), a compound containing 10B is incorporated into a pharmaceutical which is selectively taken up by a malignant tumor and tissues near it. The patient is then treated with a beam of low energy neutrons at a relatively low neutron radiation dose. The neutrons, however, trigger energetic and short-range secondary alpha particle and lithium-7 heavy ion radiation that are products of the boron-neutron nuclear reaction, and this ion radiation additionally bombards the tumor, especially from inside the tumor cells.
In nuclear reactors, 10B is used for reactivity control and in scram. It can serve either function in the form of borosilicate control rods or as boric acid. In pressurized water reactors, 10B boric acid is added to the reactor coolant after the plant is shut down for refueling. When the plant is started up again, the boric acid is slowly filtered out over many months as fissile material is used up and the fuel becomes less reactive.
BNCT has shown promising results in clinical trials for various other malignancies, including glioblastoma, head and neck cancer, cutaneous melanoma, hepatocellular carcinoma, lung cancer, and extramammary Paget's disease. The treatment involves a nuclear reaction between nonradioactive boron-10 isotope and low-energy thermal or high-energy epithermal neutrons to generate α particles and lithium nuclei that selectively destroy DNA in tumor cells. The primary challenge lies in developing efficient boron agents with higher content and specific targeting properties tailored for BNCT. Integration of tumor-targeting strategies with BNCT could potentially establish it as a practical personalized treatment option for different types of cancers. Ongoing research explores new boron compounds, optimization strategies, theranostic agents, and radiobiological advances to overcome limitations and cost-effectively improve patient outcomes.
Some boron-containing exist in nature. The first one found was boromycin, isolated from streptomyces in the 1960s. Others are , a group of antibiotics discovered in the 1990s from culture broth of the Myxobacteria Sorangium cellulosum.
In 2013, chemist and synthetic biologist Steve Benner suggested that the conditions on Mars three billion years ago were much more favorable to the stability of RNA and formation of oxygen-containing boron and molybdenum catalysts found in life. According to Benner's theory, primitive life, which is widely believed to have RNA world, first formed on Mars before Panspermia.
Boron is not classified as an essential human nutrient because research has not established a clear biological function for it. The U.S. Food and Nutrition Board (FNB) found the existing data insufficient to derive a Recommended Dietary Allowance (RDA), Adequate Intake (AI), or Estimated Average Requirement (EAR) for boron and the U.S. Food and Drug Administration (FDA) has not established a daily value for boron for food and dietary supplement labeling purposes. While low boron status can be detrimental to health, probably increasing the risk of osteoporosis, poor immune function, and cognitive decline, high boron levels are associated with cell damage and toxicity.
Still, studies suggest that boron may exert beneficial effects on reproduction and development, calcium metabolism, Ossification, brain function, insulin and energy substrate metabolism, immunity, and steroid hormone (including estrogen) and vitamin D function, among other functions. A small human trial published in 1987 reported on postmenopausal women first made boron deficient and then repleted with 3 mg/day. Boron supplementation markedly reduced urinary calcium excretion and elevated the serum concentrations of 17 beta-estradiol and testosterone. Environmental boron appears to be inversely correlated with arthritis.
The exact mechanism by which boron exerts its physiological effects is not fully understood, but may involve interactions with adenosine monophosphate (ADP) and S-adenosyl methionine (SAM-e), two compounds involved in important cellular functions. Furthermore, boron appears to inhibit cyclic ADP-ribose, thereby affecting the release of calcium ions from the endoplasmic reticulum and affecting various biological processes. Some studies suggest that boron may reduce levels of inflammatory biomarkers. Congenital endothelial dystrophy type 2, a rare form of corneal dystrophy, is linked to mutations in SLC4A11 gene that encodes a transporter reportedly regulating the intracellular concentration of boron.
In humans, boron is usually consumed with food that contains boron, such as fruits, Leaf vegetable, and nuts. Foods that are particularly rich in boron include , dried fruits such as , , , prune juice, grape juice, wine and chocolate powder. According to 2-day food records from the respondents to the Third National Health and Nutrition Examination Survey (NHANES III), adult dietary intake was recorded at 0.9 to 1.4 mg/day.Boron. IN: Dietary Reference Intakes for Vitamin A, Vitamin K, Arsenic, Boron, Chromium, Copper, Iodine, Iron, Manganese, Molybdenum, Nickel, Silicon, Vanadium, and Copper . National Academy Press. 2001, pp. 510–521.
Boric acid is more toxic to insects than to mammals, and is routinely used as an insecticide. However, it has been used in neutron capture therapy alongside other boron compounds such as sodium borocaptate and boronophenylalanine with reported low toxicity levels.
The boranes (boron hydrogen compounds) and similar gaseous compounds are quite poisonous. As usual, boron is not an element that is intrinsically poisonous, but the toxicity of these compounds depends on structure (for another example of this phenomenon, see phosphine). The boranes are also highly flammable and require special care when handling, some combinations of boranes and other compounds are highly explosive. Sodium borohydride presents a fire hazard owing to its reducing nature and the liberation of hydrogen on contact with acid. Boron halides are corrosive.
Boron is necessary for plant growth, but an excess of boron is toxic to plants, and occurs particularly in acidic soil. It presents as a yellowing from the tip inwards of the oldest leaves and black spots in barley leaves, but it can be confused with other stresses such as magnesium deficiency in other plants.
(1985). 9783110075113, Walter de Gruyter. ISBN 9783110075113
Chemical compounds
General trends
In some ways, boron is comparable to carbon in its capability to form stable covalent bond molecular networks (even nominally disordered (Amorphous solid) boron contains boron icosahedra, which are bonded randomly to each other without long-range order.). In terms of chemical behavior, boron compounds resembles silicon. Aluminium, the heavier congener of boron, does not behave analogously to boron: it is far more electropositive, it is larger, and it tends not to form homoatomic Al-Al bonds. In the most familiar compounds, boron has the formal oxidation state III. These include the common oxides, sulfides, nitrides, and halides, as well as organic derivatives
Halides
Boron forms the complete series of trihalides, i.e. BX3 (X = F, Cl, Br, I). The trifluoride is produced by treating borate salts with hydrogen fluoride, while the trichloride is produced by carbothermic reduction of boron oxides in the presence of chlorine gas: (2025). 9783527303854 ISBN 9783527303854
Oxide derivatives
Boron-containing minerals exclusively exist as oxides of B(III), often associated with other elements. More than one hundred are known. These minerals resemble silicates in some respect, although it is often found not only in a tetrahedral coordination with oxygen, but also in a trigonal planar configuration. The borates can be subdivided into two classes, anhydrous and the far more common hydrates. The hydrates contain B-OH groups and sometimes water of crystallization. A typical motif is exemplified by the tetraborate anions of the common mineral borax. The formal negative charge of the tetrahedral borate center is balanced by sodium (Na+). Some idea of the complexity of these materials is provided by the inventory of zinc borates, which are common wood preservatives and : (2025). 9783527303854 ISBN 9783527303854 4ZnO·B2O3·H2O, ZnO·B2O3·1.12H2O, ZnO·B2O3·2H2O, 6ZnO·5B2O3·3H2O, 2ZnO·3B2O3·7H2O, 2ZnO·3B2O3·3H2O, 3ZnO·5B2O3·14H2O, and ZnO·5B2O3·4.5H2O.
Hydrides
Boranes and are neutral and anionic compounds of boron and hydrogen, respectively. Sodium borohydride is the progenitor of the boranes. Sodium borohydride is obtained by hydrogenation of trimethylborate:
Sodium borohydride is a white, fairly air-stable salt.
Diborane is the dimer of the elusive parent called borane, BH3. Having a formula akin to ethane's (C2H6), diborane adopts a very different structure, featuring a pair of bridging H atoms. This unusual structure, which was deduced only in the 1940s, was an early indication of the many surprises provided by boron chemistry.
(1974). 9780470131763 ISBN 9780470131763
Organoboron compounds
A large number of organoboron compounds, species with B-C bonds, are known. Many organoboron compounds are produced from hydroboration, the addition of boranes to bonds. Diborane is traditionally used for such reactions, as illustrated by the preparation of trioctylborane:
This regiochemistry, i.e. the tendency of B to attach to the terminal carbon - is explained by the polarization of the bonds in boranes, which is indicated as Bδ+-Hδ-.
Nitrides
The boron-nitrides follow the pattern of avoiding B-B and N-N bonds: only B-N bonding is observed generally. The exhibit structures analogous to various allotropes of carbon, including graphite, diamond, and nanotubes. This similarity reflects the fact that B and N have eight valence electrons as does a pair of carbon atoms. In cubic boron nitride (tradename Borazon), boron and nitrogen atoms are tetrahedral, just like carbon in diamond. Cubic boron nitride, among other applications, is used as an abrasive, as its hardness is comparable with that of diamond. Hexagonal boron nitride (h-BN) is the BN analogue of graphite, consisting of sheets of alternating B and N atoms. These sheets stack with boron and nitrogen in registry between the sheets. Graphite and h-BN have very different properties, although both are lubricants, as these planes slip past each other easily. However, h-BN is a relatively poor electrical and thermal conductor in the planar directions. Molecular analogues of boron nitrides are represented by borazine, (BH)3(NH)3.
Carbides
Boron carbide is a ceramic material. It is obtained by carbothermal reduction of B2O3in an electric furnace:
Borides
Binary metal-boron compounds, the metal borides, contain only boron and a metal. They are metallic, very hard, with high . TiB2, ZrB2, and Hafnium diboride have melting points above 3000 °C. Some metal borides find specialized applications as hard materials for cutting tools.
Occurrence
Boron is rare in the universe and solar system. The amount of boron formed in the Big Bang is negligible. Boron is not generated in the normal course of stellar nucleosynthesis and is destroyed in stellar interiors.
Production
Economically important sources of boron are the minerals colemanite, rasorite (kernite), ulexite and tincal. Together these constitute 90% of mined boron-containing ore. The largest global borax deposits known, many still untapped, are in Central and Western Turkey, including the provinces of Eskişehir, Kütahya and Balıkesir. Global proven boron mineral mining reserves exceed one billion metric tonnes, against a yearly production of about four million tonnes. Global reserves chart . Retrieved 14 August 2014.
Market trend
The average cost of crystalline elemental boron is US$5/g. Elemental boron is chiefly used in making boron fibers, where it is deposited by chemical vapor deposition on a tungsten core (see below). Boron fibers are used in lightweight composite applications, such as high strength tapes. This use is a very small fraction of total boron use. Boron is introduced into semiconductors as boron compounds, by ion implantation.
(2025). 9780862145163, Roskill Information Services, Ltd.. ISBN 9780862145163
Applications
Nearly all boron ore extracted from the Earth is refined as boric acid and sodium tetraborate pentahydrate. In the United States, 70% of the boron is used for the production of glass and ceramics.
The major global industrial-scale use of boron compounds (about 46% of end-use) is in production of glass fiber for boron-containing insulating and structural , especially in Asia. Boron is added to the glass as borax pentahydrate or boron oxide, to influence the strength or fluxing qualities of the glass fibers.[4] Discussion of various types of boron addition to glass fibers in fiberglass. Retrieved 14 August 2014. Another 10% of global boron production is for borosilicate glass as used in high strength glassware. About 15% of global boron is used in boron ceramics, including super-hard materials discussed below. Agriculture consumes 11% of global boron production, and bleaches and detergents about 6%. Global end use of boron in 2011 . Retrieved 14 August 2014
Boronated fiberglass
Fiberglasses, a fiber reinforced polymer sometimes contain borosilicate, borax, or boron oxide, and is added to increase the strength of the glass. The highly boronated glasses, E-glass (named for "Electrical" use) are alumino-borosilicate glass. Another common high-boron glasses, C-glass, also has a high boron oxide content, used for glass staple fibers and insulation. D-glass, a borosilicate glass, named for its low dielectric constant.
Borosilicate glass
Borosilicate glass, which is typically 12–15% B2O3, 80% SiO2, and 2% Al2O3, has a low coefficient of thermal expansion, giving it a good resistance to thermal shock. Schott AG's "Duran" and Owens-Corning's trademarked Pyrex are two major brand names for this glass, used both in laboratory glassware and in consumer cookware and bakeware, chiefly for this resistance.
Elemental boron fiber
(boron filaments) are high-strength, lightweight materials that are used chiefly for advanced aerospace structures as a component of composite materials, as well as limited production consumer and sporting goods such as golf clubs and . The fibers can be produced by chemical vapor deposition of boron on a tungsten filament.
Boron carbide ceramic
Boron carbide's ability to absorb neutrons without forming long-lived (especially when doped with extra boron-10) makes the material attractive as an absorbent for neutron radiation arising in nuclear power plants. Fabrication and Evaluation of Urania-Alumina Fuel Elements and Boron Carbide Burnable Poison Elements , Wisnyi, L. G. and Taylor, K.M., in "ASTM Special Technical Publication No. 276: Materials in Nuclear Applications", Committee E-10 Staff, American Society for Testing Materials, 1959 Nuclear applications of boron carbide include shielding, control rods and shut-down pellets. Within control rods, boron carbide is often powdered, to increase its surface area.
High-hardness and abrasive compounds
Boron carbide and cubic boron nitride powders are widely used as abrasives. Boron nitride is a material isoelectronic to carbon. Similar to carbon, it has both hexagonal (soft graphite-like h-BN) and cubic (hard, diamond-like c-BN) forms. h-BN is used as a high temperature component and lubricant. c-BN, also known under commercial name borazon, is a superior abrasive. Its hardness is only slightly smaller than, but its chemical stability is superior, to that of diamond. Heterodiamond (also called BCN) is another diamond-like boron compound.
+ Mechanical properties of BCN solids and ReB2
!Material
!Diamond
!cubic-BC2N
!cubic-BC5
!cubic-BN
!B4C
!ReB2
Metallurgy
Boron is added to at the level of a few parts per million to increase hardenability. Higher percentages are added to steels used in the nuclear industry due to boron's neutron absorption ability.
Detergent formulations and bleaching agents
Borax is used in various household laundry and cleaning products. It is also present in some tooth bleaching formulas.
Insecticides and antifungals
Zinc borates and boric acid, popularized as , are widely used as wood preservatives and insecticides. Boric acid is also used as a domestic insecticide.
Semiconductors
Boron is a useful dopant for such semiconductors as silicon, germanium, and silicon carbide. Having one fewer valence electron than the host atom, it donates a electron hole resulting in p-type conductivity. Traditional method of introducing boron into semiconductors is via its atomic diffusion at high temperatures. This process uses either solid (B2O3), liquid (BBr3), or gaseous boron sources (B2H6 or BF3). However, after the 1970s, it was mostly replaced by ion implantation, which relies mostly on BF3 as a boron source. Boron trichloride gas is also an important chemical in semiconductor industry, however, not for doping but rather for plasma etching of metals and their oxides. Triethylborane is also injected into vapor deposition reactors as a boron source. Examples are the plasma deposition of boron-containing hard carbon films, silicon nitride–boron nitride films, and for doping of diamond film with boron.
Magnets
Boron is a component of (Nd2Fe14B), which are among the strongest type of permanent magnet. These magnets are found in a variety of electromechanical and electronic devices, such as magnetic resonance imaging (MRI) medical imaging systems, in compact and relatively small motors and . As examples, computer HDDs (hard disk drives), CD (compact disk) and DVD (digital versatile disk) players rely on neodymium magnet motors to deliver intense rotary power in a remarkably compact package. In mobile phones 'Neo' magnets provide the magnetic field which allows tiny speakers to deliver appreciable audio power.
Shielding and neutron absorber in nuclear reactors
Boron shielding is used as a control for , taking advantage of its high cross-section for neutron capture.
Other nonmedical uses
Pharmaceutical and biological applications
Boron plays a role in pharmaceutical and biological applications as it is found in various antibiotics produced by bacteria, such as , , , and . These antibiotics have shown inhibitory effects on the growth of certain bacteria, fungi, and protozoa. Boron is also being studied for its potential medicinal applications, including its incorporation into biologically active molecules for therapies like boron neutron capture therapy for brain tumors. Some boron-containing biomolecules may act as signaling molecules interacting with cell surfaces, suggesting a role in cellular communication.
Research
MgB2
Magnesium diboride (MgB2) is a superconductor with the transition temperature of 39 K. MgB2 wires are produced with the powder-in-tube process and applied in superconducting magnets. A project at CERN to make MgB2 cables has resulted in superconducting test cables able to carry 20,000 amperes for extremely high current distribution applications, such as the contemplated high luminosity version of the Large Hadron Collider.
Commercial isotope enrichment
Because of its high neutron cross-section, boron-10 is often used to control fission in nuclear reactors as a neutron-capturing substance. Several industrial-scale enrichment processes have been developed; however, only the fractionated vacuum distillation of the dimethyl ether adduct of boron trifluoride (DME-BF3) and column chromatography of borates are being used. showing an enrichment from 18% to above 94%.
Radiation-hardened semiconductors
Cosmic radiation will produce secondary neutrons if it hits spacecraft structures. Those neutrons will be captured in 10B, if it is present in the spacecraft's , producing a gamma ray, an alpha particle, and a lithium ion. Those resultant decay products may then irradiate nearby semiconductor "chip" structures, causing data loss (bit flipping, or single event upset). In radiation-hardened semiconductor designs, one countermeasure is to use depleted boron, which is greatly enriched in 11B and contains almost no 10B. This is useful because 11B is largely immune to radiation damage. Depleted boron is a byproduct of the nuclear power (see above).
Proton-boron fusion
11B is also a candidate as a fuel for aneutronic fusion. When struck by a proton with energy of about 500 kelectronvolt, it produces three alpha particles and 8.7 MeV of energy. Most other fusion reactions involving hydrogen and helium produce penetrating neutron radiation, which weakens reactor structures and induces long-term radioactivity, thereby endangering operating personnel. The alpha particles from 11B fusion can be turned directly into electric power, and all radiation stops as soon as the reactor is turned off.
Enriched boron (boron-10)
The 10B isotope is useful for capturing (see neutron cross section#Typical cross sections). The nuclear power enriches natural boron to nearly pure 10B. The less-valuable by-product, depleted boron, is nearly pure 11B.
Nuclear fusion
Boron has been investigated for possible applications in nuclear fusion research. It is commonly used for conditioning the walls in fusion reactors by depositing boron coatings on plasma-facing components and walls to reduce the release of hydrogen and impurities from the surfaces. It is also being used for the dissipation of energy in the fusion plasma boundary to suppress excessive energy bursts and heat fluxes to the walls.
Neutron capture therapy
In neutron capture therapy (BNCT) for malignant brain tumors, boron is researched to be used for selectively targeting and destroying tumor cells. The goal is to deliver higher concentrations of the non-radioactive boron isotope (10B) to the tumor cells than to the surrounding normal tissues. When these 10B-containing cells are irradiated with low-energy thermal neutrons, they undergo nuclear capture reactions, releasing high linear energy transfer (LET) particles such as α-particles and lithium-7 nuclei within a limited path length. These high-LET particles can destroy the adjacent tumor cells without causing significant harm to nearby normal cells. Boron acts as a selective agent due to its ability to absorb thermal neutrons and produce short-range physical effects primarily affecting the targeted tissue region. This binary approach allows for precise tumor cell killing while sparing healthy tissues. The effective delivery of boron involves administering boron compounds or carriers capable of accumulating selectively in tumor cells compared to surrounding tissue. BSH and BPA have been used clinically, but research continues to identify more optimal carriers. Accelerator-based neutron sources have also been developed recently as an alternative to reactor-based sources, leading to improved efficiency and enhanced clinical outcomes in BNCT. By employing the properties of boron isotopes and targeted irradiation techniques, BNCT offers a potential approach to treating malignant brain tumors by selectively killing cancer cells while minimizing the damage caused by traditional radiation therapies.
Biological role
Boron is an essential plant nutrient, required primarily for maintaining the integrity of cell walls. However, high soil concentrations of greater than 1.0 ppm lead to marginal and tip necrosis in leaves as well as poor overall growth performance. Levels as low as 0.8 ppm produce these same symptoms in plants that are particularly sensitive to boron in the soil. Nearly all plants, even those somewhat tolerant of soil boron, will show at least some symptoms of boron toxicity when soil boron content is greater than 1.8 ppm. When this content exceeds 2.0 ppm, few plants will perform well and some may not survive.
In human health
It is thought that boron plays several essential roles in animals, including humans, but the exact physiological role is poorly understood. Boron deficiency has only been clearly established in livestock; in humans, boron deficiency may affect bone mineral density, though it has been noted that additional research on the effects of bone health is necessary.
Health issues and toxicity
Elemental boron, boron trioxide, boric acid, borates, and many organoboron compounds are relatively nontoxic to humans and animals (with toxicity similar to that of table salt). The LD50 (dose at which there is 50% mortality) for animals is about 6 g per kg of body weight. Substances with an LD50 above 2 g/kg are considered nontoxic. An intake of 4 g/day of boric acid was reported without incident, but more than this is considered toxic in more than a few doses. Intakes of more than 0.5 grams per day for 50 days cause minor digestive and other problems suggestive of toxicity.
See also
Notes
External links
|
|
