Product Code Database
Woodcut is a relief printing technique in printmaking. An artist carves an image into the surface of a block of wood—typically with gouges—leaving the printing parts level with the surface while removing the non-printing parts. Areas that the artist cuts away carry no ink, while characters or images at surface level carry the ink to produce the print. The block is cut along the wood grain (unlike wood engraving, where the block is cut in the end-grain). The surface is covered with ink by rolling over the surface with an ink-covered roller (brayer), leaving ink upon the flat surface but not in the non-printing areas.
Multiple colours can be printed by keying the paper to a frame around the woodblocks (using a different block for each colour). The art of carving the woodcut can be called xylography, but this is rarely used in English for images alone, although that term and xylographic are used in connection with , which are small books containing text and images in the same block. They became popular in Europe during the latter half of the 15th century. A single-sheet woodcut is a woodcut presented as a single stand alone image or print, as opposed to a book illustration.
The older East Asian technique is usually called woodblock printing, covering both carved text and images, typically on the same block. Short books in a similar technique in Europe, mostly made in the 15th century, are called . "Woodcut" usually refers to images only and has spread around the world from Europe to other parts of Asia, and to Latin America.
This is why woodcuts are sometimes described by museums or books as "designed by" rather than "by" an artist; but most authorities do not use this distinction. The division of labour had the advantage that a trained artist could adapt to the medium relatively easily, without needing to learn the use of woodworking tools.
There were various methods of transferring the artist's drawn design onto the block for the cutter to follow. Either the drawing would be made directly onto the block (often whitened first), or a drawing on paper was glued to the block. Either way, the artist's drawing was destroyed during the cutting process. Other methods were used, including tracing.
In both Europe and East Asia in the early 20th century, some artists began to do the whole process themselves. In Japan, this movement was called creative prints, as opposed to new prints, a movement that retained traditional methods. In the West, many artists used the easier technique of linocut instead.
There are three methods of printing to consider:
In Europe, woodcut is the oldest technique used for old master prints, developing about 1400, by using, on paper, existing techniques for printing. One of the more ancient single-leaf woodcuts on paper that can be seen today is The Fire Madonna ( Madonna del Fuoco, in the Italian language), in the Cathedral of Forlì, in Italy. Initially religious subjects, often very small indeed, were by far the most common. Many were sold to pilgrims at their destination, and glued to walls in homes, inside the lids of boxes, and sometimes even included in bandages over wounds, which was superstitiously believed to help healing.
The explosion of sales of cheap woodcuts in the middle of the century led to a fall in standards, and many were very crude. The development of hatching followed on rather later than engraving. Michael Wolgemut was significant in making German woodcuts more sophisticated from about 1475, and Erhard Reuwich was the first to use cross-hatching (far harder to do than engraving or etching). Both of these produced mainly book-illustrations, as did various Italian artists who were also raising standards there at the same period. At the end of the century Albrecht Dürer brought the Western woodcut to a level that, arguably, has never been surpassed, and greatly increased the status of the "single-leaf" woodcut (i.e. an image sold separately). He briefly made it equivalent in quality and status to engravings, before he turned to these himself.
In the first half of the 16th century, high quality woodcuts continued to be produced in Germany and Italy, where Titian and other artists arranged for some to be made. Much of the interest was in developing the chiaroscuro woodcut, using multiple blocks printed in different colours.
Because woodcuts and movable type are both relief-printed, they can easily be printed together. Consequently, woodcut was the main medium for book illustrations until the late sixteenth century. The first woodcut book illustration dates to about 1461, only a few years after the beginning of printing with movable type, printed by Albrecht Pfister in Bamberg. Woodcut was used less often for individual ("single-leaf") fine-art prints from about 1550 until the late nineteenth century, when interest revived. It remained important for popular prints until the nineteenth century in most of Europe, and later in some places.
The art reached a high level of technical and artistic development in East Asia and Iran. Woodblock printing in Japan is called moku-hanga and was introduced in the seventeenth century for both books and art. The popular "floating world" genre of ukiyo-e originated in the second half of the seventeenth century, with prints in monochrome or two colours. Sometimes these were hand-coloured after printing. Later, prints with many colours were developed. Japanese woodcut became a major artistic form, although at the time it was accorded a much lower status than painting. It continued to develop through to the twentieth century.
Though the Japanese influence was reflected in many artistic media, including painting, it did lead to a revival of the woodcut in Europe, which had been in danger of extinction as a serious art medium. Most of the artists above, except for Félix Vallotton and Paul Gauguin, in fact used lithography, especially for coloured prints. See below for Japanese influence in illustrations for children's books.
Artists, notably Edvard Munch and Franz Masereel, continued to use the medium, which in Modernism came to appeal because it was relatively easy to complete the whole process, including printing, in a studio with little special equipment. The German used woodcut a good deal.
In Europe and Japan, colour woodcuts were normally only used for prints rather than book illustrations. In China, where the individual print did not develop until the nineteenth century, the reverse is true, and early colour woodcuts mostly occur in luxury books about art, especially the more prestigious medium of painting. The first known example is a book on ink-cakes printed in 1606, and colour technique reached its height in books on painting published in the seventeenth century. Notable examples are Hu Zhengyan's Treatise on the Paintings and Writings of the Ten Bamboo Studio of 1633, and the Mustard Seed Garden Painting Manual published in 1679 and 1701.L Sickman & A Soper, "The Art and Architecture of China", Pelican History of Art, 3rd ed 1971, Penguin, LOC 70-125675
In Japan colour technique, called nishiki-e in its fully developed form, spread more widely, and was used for prints, from the 1760s on. Text was nearly always monochrome, as were images in books, but the growth of the popularity of ukiyo-e brought with it demand for ever-increasing numbers of colours and complexity of techniques. By the nineteenth century most artists worked in colour. The stages of this development were:
A number of different methods of colour printing using woodcut (technically Chromoxylography) were developed in Europe in the 19th century. In 1835, George Baxter patented a method using an intaglio line plate (or occasionally a lithograph), printed in black or a dark colour, and then overprinted with up to twenty different colours from woodblocks. Edmund Evans used relief and wood throughout, with up to eleven different colours, and latterly specialized in illustrations for children's books, using fewer blocks but overprinting non-solid areas of colour to achieve blended colours. Artists such as Randolph Caldecott, Walter Crane and Kate Greenaway were influenced by the Japanese prints now available and Japonism in Europe to create a suitable style, with flat areas of colour.
In the 20th century, Ernst Ludwig Kirchner of the Die Brücke group developed a process of producing coloured woodcut prints using a single block applying different colours to the block with a brush à la poupée and then printing (halfway between a woodcut and a monotype). (1984). 9780714116211, British Museum Press. ISBN 9780714116211 A remarkable example of this technique is the 1915 Portrait of Otto Mueller woodcut print from the collection of the British Museum.
===Gallery of Asian woodcuts===
Other printmaking to use the technique include Hans Baldung and Parmigianino. In the German states the technique was in use largely during the first decades of the sixteenth century, but Italians continued to use it throughout the century, and later artists like Hendrik Goltzius sometimes made use of it. In the German style, one block usually had only lines and is called the "line block", whilst the other block or blocks had flat areas of colour and are called "tone blocks". The Italians usually used only tone blocks, for a very different effect, much closer to the chiaroscuro drawings the term was originally used for, or to watercolour paintings.Landau and Parshall, The Renaissance Print, pp. 179–202; 273–81 & passim; Yale, 1996,
The Swedish printmaker Torsten Billman (1909–1989) developed during the 1930s and 1940s a variant chiaroscuro technique with several gray tones from ordinary printing ink. The art historian Gunnar Jungmarker (1902–1983) at Stockholm's Nationalmuseum called this technique "grisaille woodcut". It is a time-consuming printing process, exclusively for hand printing, with several grey-wood blocks aside from the black-and-white key block.Sjöberg, Leif, Torsten Billman and the Wood Engraver's Art, pp. 165–171. The American Scandinavian Review, Vol. LXI, No. 2, June 1973. New York 1973.
In 1921, Jean Charlot, a French printmaker moved to Mexico City. Recognizing the importance of Posada's woodcut engravings, he started teaching woodcut techniques in Coyoacán's open-air art schools. Many young Mexican artists attended these lessons including the Fernando Leal.
After the Mexican Revolution, the country was in political and social upheaval - there were worker strikes, protests, and marches. These events needed cheap, mass-produced visual prints to be pasted on walls or handed out during protests. Information needed to be spread quickly and cheaply to the general public. Many people were still illiterate during this time and there was push after the Revolution for widespread education. In 1910 when the Revolution began, only 20% of Mexican people could read. Art was considered to be highly important in this cause and political artists were using journals and newspapers to communicate their ideas through illustration. El Machete (1924–29) was a popular communist journal that used woodcut prints. The woodcut art served well because it was a popular style that many could understand.
Artists and activists created collectives such as the Taller de Gráfica Popular (TGP) (1937–present) and The Treintatreintistas (1928–1930) to create prints (many of them woodcut prints) that reflected their socialist and communist values. The TGP attracted artists from all around the world including African American printmaker Elizabeth Catlett, whose woodcut prints later influenced the art of social movements in the US in the 1960s and 1970s. The Treintatreintistas even taught workers and children. The tools for woodcut are easily attainable and the techniques were simple to learn. It was considered an art for the people.
Mexico at this time was trying to discover its identity and develop itself as a unified nation. The form and style of woodcut aesthetic allowed a diverse range of topics and visual culture to look unified. Traditional, folk images and avant-garde, modern images, shared a similar aesthetic when it was engraved into wood. An image of the countryside and a traditional farmer appeared similar to the image of a city. This symbolism was beneficial for politicians who wanted a unified nation. The physical actions of carving and printing woodcuts also supported the values many held about manual labour and supporting workers' rights.
|
|
