Saponification is a process of cleaving into carboxylate salts and alcohols by the action of aqueous alkali. Typically aqueous sodium hydroxide solutions are used.
Saponification of fats
and
are the traditional materials that are saponified. These greasy materials, triesters called
, are usually mixtures derived from diverse fatty acids. In the traditional saponification, the triglyceride is treated with
lye, which cleaves the ester bonds, releasing fatty acid salts (soaps) and
glycerol. In one simplified version, the saponification of
stearin gives
sodium stearate.
This process is the main industrial method for producing glycerol ().
Some soap-makers leave the glycerol in the soap. Others precipitate the soap by salting out with sodium chloride.
Fat in a Dead body converts into adipocere, often called "grave wax". This process is more common where the amount of adipose tissue is high and the agents of decomposition are absent or only minutely present.
Saponification value
The saponification value is the amount of base required to saponify a fat sample.
Soap makers formulate their recipes with a small deficit of lye to account for the unknown deviation of saponification value between their oil batch and laboratory averages.
Mechanism of basic hydrolysis
The hydroxide anion adds to the carbonyl group of the ester. The immediate product is called an
orthoester.
Expulsion of the alkoxide generates a carboxylic acid:
The alkoxide ion is a strong base so the proton is transferred from the carboxylic acid to the alkoxide ion, creating an alcohol:
In a classic laboratory procedure, the triglyceride trimyristin is obtained by extracting it from nutmeg with diethyl ether. Saponification to the soap sodium myristate takes place using NaOH in water. Treating the soap with hydrochloric acid gives myristic acid.
Saponification of fatty acids
The reaction of fatty acids with a base is another main method of saponification. In this case, the reaction involves neutralization of the
carboxylic acid. The neutralization method is used to produce industrial soaps, such as those derived from magnesium, transition metals, and aluminium. This method is ideal for producing soaps derived from a single fatty acid, resulting in soaps with predictable physical properties, as required by many engineering applications.
Applications
Hard and soft soaps
Depending on the nature of the alkali used in their production, soaps have distinct properties.
Sodium hydroxide (NaOH) produces
Hard soap; hard soaps can also be used in water containing Mg, Cl, and Ca salts.
By contrast,
potassium soaps (derived using KOH) are
Soap. The fatty acid source also affects the soap's melting point. Most early hard soaps were manufactured using
Animal fat and potash (KOH) extracted from
wood ash; these were broadly solid. However, the majority of modern soaps are manufactured from polyunsaturated triglycerides such as
Vegetable oil. As with the triglycerides they are formed from,
the salts of these acids have weaker inter-molecular forces and thus lower melting points.
Lithium soaps
Lithium 12-hydroxystearate and other
lithium-based fatty acids are important constituents of lubricating greases. In lithium-based greases, lithium
are thickeners. "Complex soaps" are also common, these being combinations of more than one acid salt, such as
Azelaic acid or
acetic acid.
Fire extinguishers
Fires involving
and oils (classified as class K (US) or F (Australia/Europe/Asia)) burn hotter than most flammable liquids, rendering a standard class B extinguisher ineffective. Such fires should be extinguished with a wet chemical extinguisher. Extinguishers of this type are designed to extinguish cooking fats and oils through saponification. The extinguishing agent rapidly converts the burning substance to a non-combustible soap.
Oil paints
Saponification can occur in
over time, causing visible damage and deformation. Oil paints are composed of pigment molecules suspended in an oil-binding
Drying oil. Heavy metal salts are often used as pigment molecules, such as in
lead white,
red lead, and
zinc white.
If those heavy metal salts react with free fatty acids in the oil medium, metal soaps may form in a paint layer that can then migrate outward to the painting's surface.
[ PDF of full issue.]
Saponification in oil paintings was described as early as 1912.
The saponified regions may deform the painting's surface through the formation of visible lumps or protrusions that can scatter light. These soap lumps may be prominent only on certain regions of the painting rather than throughout. In John Singer Sargent's famous Portrait of Madame X, for example, the lumps only appear on the blackest areas, which may be because of the artist's use of more medium in those areas to compensate for the tendency of black pigments to soak it up.
Saponification does not occur in all oil paintings and many details are unresolved.
See also
External links
