Product Code Database
A pallet (also called a skid) is a flat transport structure, which supports goods in a stable fashion while being lifted by a forklift, a pallet jack, a front loader, a jacking device, or an erect crane. Many pallets can handle a load of . While most pallets are wooden, pallets may also be made of plastic, metal, paper, and recycled materials.
A pallet is the structural foundation of a unit load, which allows handling and storage efficiencies. Goods in shipping containers are often placed on a pallet secured with strapping, stretch wrap or shrink wrap and shipped. In addition, can be used to support and protect items shipped and stored on pallets.
Containerization for transport has spurred the use of pallets because shipping containers have the smooth, level surfaces needed for easy pallet movement. Since its invention in the twentieth century, its use has dramatically supplanted older forms of crating like the wooden box and the wooden barrel, as it works well with modern packaging like and intermodal containers commonly used for bulk shipping. In 2020 about half a billion pallets are made each year and about two billion pallets are in use across the United States alone. Organizations using standard pallets for loading and unloading can have much lower costs for handling and storage, with faster material movement than businesses that do not. The exceptions are establishments that move small items such as jewelry or large items such as cars. But even they can be improved. For instance, the distributors of costume jewelry normally use pallets in their and car manufacturers use pallets to move components and spare parts. Pallets make it easier to move heavy stacks. Loads with pallets under them can be hauled by forklift trucks of different sizes, or even by hand-pumped and hand-drawn pallet jacks. Movement is easy on a wide, strong, flat floor: concrete is excellent. The greatest investment needed for economical pallet use is in the construction of commercial or industrial buildings. Ability to pass through standard doors and buildings make handling more convenient. For this reason, some modern pallet standards are designed to pass through standard doorways, for example the EUR-pallet (800 mm × 1,200 mm) and the U.S. military .
The lack of a single international standard for pallets causes substantial continuing expense in international trade. A single standard is difficult because of the wide variety of needs a standard pallet would have to satisfy: passing doorways, fitting in standard containers, and bringing low labor costs. For example, organizations already handling large pallets often see no reason to pay the higher handling cost of using smaller pallets that can fit through doors. Heavy-duty pallets are a form of reusable packaging and are designed to be used multiple times. Lightweight pallets are designed for a single use. In the EU, government legislation based on the Waste Framework Directive requires the reuse of packaging items in preference to recycling and disposal.
The development of the forklift and the needs of World War II logistics operations led to substantial use of pallets.
References to the early modern pallets types are slim with a string of patents showing parts of the development. The earliest may be a U.S. patent on a skid from 1924 describing Howard T. Hallowell's "Lift Truck Platform".United States Patent Office, Lift-Truck Platform, patent reference 1,508,183, awarded 9 September 1924, accessed 21 January 2017 In the late 1930s, pallets became more commonplace with the newer forklift types. George G. Raymond and William C. House filed for a patent in 1937 (granted US Patent 2178646 in 1939) for a pallet designed to complement a new pallet jack design; the essential features of both are still in common use today. A 1939 patent from Carl Clark shows a type of pallet with steel stringers. Wartime developments were often patented just after the war, so there is a patent from Robert Braun on a four-way pallet in 1945, and a patent from Norman Cahners (a U.S. Navy supply officer) shows a disposable pallet in 1949. The principle of a modern four-way pallet is described by Darling Graeme in 1949.
The cheapest pallets are made of softwood and are often considered expendable, to be discarded as trash along with other wrapping elements, at the end of the trip. These pallets are simple stringer pallets, and able to be lifted from two sides.
Slightly more complex, hardwood block pallets, plastic pallets and metal pallets can be lifted from all four sides. These costlier pallets usually require a deposit and are returned to the sender or resold as used. Many "four way" pallets are color-coded according to the loads they can bear, and other attributes. Wood pallets can pose serious bio-hazard risks as they are susceptible to bacterial and chemical contamination, such as E. coli problems in food and produce transportation, and even insect infestation, and thus the need for ISPM 15.
Wooden pallet construction specifications can depend on the pallet's intended use: general, FDA, storage, chemical, export; the expected load weight; type of wood desired: recycled, hard, soft, kiln dried or combo (new and recycled); and even the type of fasteners desired to hold the pallet together: staples or nails.
The price of wooden pallets reached a record high during the COVID-19 pandemic, due to increases in the prices of supplies and labor.
Although pallets come in all sizes and configurations, all pallets fall into two very broad categories: "stringer" and "block" pallets. Various software packages exist to assist the pallet maker in designing an appropriate pallet for a specific load and evaluating wood options to reduce costs.
Stringer pallets are one of the original models of wooden pallets. They use a frame of three or more parallel pieces of timber (called stringers). The top deckboards are then affixed to the stringers to create the pallet structure. Stringer pallets can have a notch cut into them allowing "four-way" entry. Forklifts can lift a stringer pallet from all four directions, though lifting by the stringers is more secure. Stringer pallets can be made of both wood and plastic.
Block pallets utilize both parallel and perpendicular stringers to better facilitate efficient handling. A block pallet is also known as a "four-way" pallet, since a pallet-jack may be used from any side to move it.
Carrier blocks are specialized pallets for lumber carriers
Flush pallets are pallets with deck boards that are flush with the stringers and stringer boards along the ends and sides of the pallet.
All stringer and some block pallets have "unidirectional bases", i.e. bottom boards oriented in one direction. While automated handling equipment can be designed for this, often it can operate faster and more effectively if the bottom edges of a pallet have bottom boards oriented in both directions. For example, it may not need to turn a pallet to rack it, and operation is less sensitive to pallet orientation.
The least expensive way to improve a pallet is usually to specify better nails. With non-wood pallets, a controlled coefficient of friction is often helpful to prevent the pallet from slipping from forks and racks. Stiffer pallets are more durable, and are handled more easily by automated equipment. If a pallet does not need to be lifted from all four sides, two-way pallets with unnotched stringers may be used, with the additional benefits of added rigidity and strength. Specifying tolerances on flatness and water content may help the supplier meet target requirements. Inspection of pallets, whether in person or by a third-party (such as "SPEQ" inspected pallets) offer additional assurance of quality.
The main processes that are used to manufacture wooden pallets:
Due to the International Plant Protection Convention (abbreviated IPPC), most pallets shipped across national borders must be made of materials that are incapable of being a carrier of invasive species of insects and . The standards for these pallets are specified in ISPM 15.
Pallets made of raw, untreated wood are not compliant with ISPM 15. To be compliant the pallets (or other wood packaging material) must meet debarked standards, and must be treated by either of the following means under the supervision of an approved agency:
Treated wood pallets must be stamped on two opposite sides, indicating either HT for heat treated or MB for methyl bromide treatment.
Pallets made of non-wood materials such as steel, aluminum, plastic, or engineered wood products, such as plywood, oriented strand board, or corrugated fiberboard do not need IPPC approval, and are considered to be exempt from ISPM 15 regulations.
Plastic pallets are produced and used widely in the U.S. and Europe, spurred by the adoption of the ISPM 15. A full comparison of wood vs plastic can be made by a life cycle analysis. Plastic pallets can cost 10 times as much as hardwood pallets and even more expensive compared to cheap expendable softwood pallets. RFID chips can be molded into the pallets to monitor locations and track inventory.
There are six main types of plastic processes that are used to manufacture pallets:
Aluminum pallets are stronger than wood or plastic, lighter than steel, and resist weather, rotting, plastic creep and corrosion. They are sometimes used for air-freight, long-term outdoor or at-sea storage, or military transport.
Pallet users want pallets to pass easily through buildings, to stack and fit in warehouse, to be accessible to forklifts and pallet jacks, and to function in automated . To avoid shipping air, pallets should also be packed tightly inside intermodal containers and vans.
Though some major standards exist, there are no universally accepted standards for pallet dimensions. Companies and organizations utilize hundreds of different pallet sizes around the globe. While no single-dimensional standard governs pallet production, a few different sizes are widely used.
The standard 48×40 North American pallet, or GMA pallet, has stringers of 48 inches and deckboards of 40 inches, and was standardized by the Grocery Manufacturers Association (GMA).
Lightweight plastic pallets can weigh as little as , while heavier models may weigh up to . Standard GMA pallets can hold up to .
Heavy duty International Plant Protection Convention (IPPC) Pallets are approximately wide by long, have three wood stringers that are a nominal high by wide timber, and weigh about . Their deck is fully covered by plywood, and is painted in blue in European and Russian countries.
Two-way pallets are designed to be lifted by the deckboards.
Four-way pallets, or pallets for heavy loads (or general-purpose systems that might have heavy loads) are best lifted by their more rigid stringers. These pallets are usually heavier, bigger and more durable than two-way pallets.
| 1,016 × 1,219 | 40.00 × 48.00 | 3.7% (20 pallets in 40 ft ISO) | North America |
| 1,000 × 1,200 | 39.37 × 47.24 | 6.7% | Europe, Asia; similar to 40 × 48-inch. Same footprint as a EUR 3 pallet. |
| 1,165 × 1,165 | 45.9 × 45.9 | 8.1% | Australia |
| 1,067 × 1,067 | 42.00 × 42.00 | 11.5% | North America, Europe, Asia |
| 1,100 × 1,100 | 43.30 × 43.30 | 14% | Asia |
| 800 × 1,200 | 31.50 × 47.24 | 15.2% | Europe; fits many doorways. Same footprint as a EUR 1 pallet. |
| 1,016 × 1,219 | 40 × 48 | 1 | Grocery, many others |
| 1,067 ×1,067 | 42 × 42 | 2 | Telecommunications, paint |
| 1219 × 1219 | 48 × 48 | 3 | Drums |
| 1,219 × 1,016 | 48 × 40 | 4 | Military,, para. 4.8.3, mil-std pallets are 4-way: 4.3.1 cement |
| 1,219 × 1,067 | 48 × 42 | 5 | Chemical, beverage |
| 1,016 × 1,016 | 40 × 40 | 6 | Dairy |
| 1,219 × 1,143 | 48 × 45 | 7 | Automotive |
| 1,118 × 1,118 | 44 × 44 | 8 | Drums, chemical |
| 914 × 914 | 36 × 36 | 9 | Beverage |
| 1,219 × 914 | 48 × 36 | 10 | Beverage, shingles, packaged paper |
| 889 × 1,156 | 35 × 45.5 | Unknown | Military ISO container, fits 36-inch standard doorsMIL-STD-1660, ibid.,
para. 4.8.3 |
| 2,240 × 2,740 | 88 ×108 | Unknown | Military air cargo (463L system) |
| 1,219 × 508 | 48 × 20 | Unknown | Retail |
| EUR EUR 1 | ISO1, same size as EUR. The pallet weight is 20–25 kg. Weight of a load: 2490 kg. | |
| EUR 2 | ISO2. The pallet weight is 33 kg. Weight of a load: 1470 kg. | |
| EUR 3 | The pallet weight is 29 kg. Weight of a load of 1920 kg. | |
| EUR 6 | ISO0, half the size of EUR. The pallet weight is 9.5 kg. Weight of the safe load: 500 kg. | |
| quarter the size of EUR | ||
| one-eighth the size of EUR |
The Australian standard pallet dates back to World War II, while ISO containers date to the late 1950s. Although the pallet's dimensions predate the ISO containers, it requires less dunnage, is square, and leaves less wasted space than other pallets, including the GMA pallet. In 2010, Australia adopted the globally accepted ISPM 15 wood packaging material regulations (before this time, it was hardwood and more expensive).
ISO Technical Committee 51 (Pallets for unit load method of materials handling) states its scope of work entailing the "standardization of pallets in general use in the form of platforms or trays on which goods may be packed to form unit loads for handling by mechanical devices". The Technical Committee works in conjunction with other Technical Committees focused on transportation infrastructure to develop interrelated standards. TC 51 is responsible for developing ISO Standard 6780: Flat pallets for intercontinental materials handling—Principal dimensions and tolerances as well as sixteen other standards related to pallet construction and testing.
The National Wood Pallet and Container Association (NWPCA) is a trade organization based in the United States representing the interests of wood pallet and container manufacturers.
The U.S. Department of Defense, Department of the Navy, Naval Sea Systems Command maintains MIL-STD-1660, the standard description of palletized unit loads for the U.S. Military and some allies.MIL-STD-1660, ibid. DOD Unit loads generally use pallets, are less than , weatherproof, and stack high. They often use steel pallets, steel straps with notched seals, outdoor plywood, and plastic film. The standard describes tests for stacking, transport, sling, forklift and pallet jack, impact, drop tests, tip, water-retention, and disassembly.
In addition to the other standards it publishes, the European Committee for Standardization, also known as the Comité Européen de Normalisation (CEN), produces standards for pallets. While the standards are voluntary in nature, many companies and organizations involved in transportation have adopted them. The major standard for pallets produced by CEN is ICS: 55.180.20 General purpose pallets
Items made from pallet wood are likely to be durable and demonstrate good weather resistance due to these treatments. However, close contact with pallet wood or inhalation of dusts from sanding or sawing can be a source of exposure to pesticide and fungicide chemicals. It is likely that the January 2010 recall of Johnson and Johnson Tylenol and other drugs was due to their being stored on wooden pallets that had been treated with the fungicide/pesticide 2,4,6-tribromophenol. This chemical can be degraded by molds to produce 2,4,6-tribromoanisole whose strong, musty odor caused consumers to complain.Chemical & Engineering News, 25 January 2020, p. 18 There is no acute or chronic health data on 2,4,6-tribromoanisole,Sigma Aldrich, MSDS, 2009 but it is believed that the contaminated drugs caused nausea and other health effects in some people.
Pallet boxes are pallets with four pallet walls on top and possibly a lid. Unlike pallets, pallet boxes can be stacked when they are fully loaded. They may also be fitted with a lid during stacking for stability reasons. By stacking pallet boxes on each other space can be used more efficiently, thus they are able to save warehouse space and truck load capacity. Another advantage of pallet boxes is that the goods are stored safely and are not easily damaged during logistic movements and transport. Furthermore, there are collapsible pallet boxes from which the pallet walls can be laid flat on the pallet. In this way, less space is required during empty return transport.
are closely related; they are usually large separate boxes shipped on pallets.
Discarded wooden pallets should not be used for firewood or crafts unless it has been determined that the wood in these pallets has not been treated with wood preservatives, fungicides and/or pesticides. Various pyrethrins and propiconazole are common treatments for wooden pallets. In addition, imported palletized goods are routinely fumigated with highly toxic pesticides. During use, harmful materials or chemicals also may spill on the pallet wood and be absorbed.
Craft publications have advised readers to use pallets to build a skateboarding obstacle called a manual pad, barricades during amateur paintball games, or other sport-related items. Other publications have suggested using pallet wood for small animal cages or fences. Pallet wood has been recycled for use as furniture wood by at least one company.
The acoustic guitar maker Taylor Guitars once produced a high quality "pallet guitar" made from pallet wood, in order to demonstrate the importance of construction technique versus expensive exotic woods.
I-Beam Design, an architecture and interior design firm based in New York City, won an award in a 1999 competition sponsored by Architecture for Humanity for their submission of "The Pallet House", a design solution to house the returning refugees of Kosovo. Full-scale prototypes of the Pallet House were featured in the "Casa per Tutti" Exhibit at the Milan Triennale and the Earth Awards in Prince Charles' Royal Gardens as part of The Prince's Charities Foundation's Conference on a Sustainable Future organized in collaboration with IBM and the Financial Times. The Pallet House is an affordable transitional home that can become permanent over time. It can be used as refugee housing or as affordable housing as well. Due to the nature of the pallet module, the wall cavity can be insulated with a variety of materials that are accessible to the user.
The two Austrian students Andreas Claus Schnetzer and Gregor Pils from the University of Vienna created a home entitled Pallet house; as the name suggests, they reused pallets to form a modular, energy efficient and affordable housing. The idea was born in 2008 during a competition and the Pallet house has been exhibited in several European cities including Venice, Vienna, Linz and Grenoble.
In 2014, Denver, Colorado was host to an Inaugural Pallet-Fest festival, which showcased the versatility of pallets and included large art structures made with Upcycling materials, a pallet maze, a pallet amphitheater with live musical performances, sustainable living demonstrations, an upcycled fashion show, vendors and artists selling upcycled goods, and a parkour course. The event was Crowdfunding and organized by Upcycle Events.Confluence Denver, "PalletFest Upcycles Denver", 26 August 2015 (re: second annual event), accessed 31 October 2019
In Northern Ireland, wooden pallets are used to construct during celebrations of the Eleventh Night, the night before the Twelfth of July. They are built in the weeks ahead and are lit in Ulster loyalism neighbourhoods, often accompanied by street parties and marching bands. There is some contention to this practice, especially when they involve the burning of flags or effigies.
|
|
