Methemoglobin (British: methaemoglobin, shortened MetHb) (pronounced "met-hemoglobin") is a hemoglobin in the form of metalloprotein, in which the iron in the heme group is in the Fe3+ (ferric) state, not the Fe2+ (ferrous) of normal hemoglobin. Sometimes, it is also referred to as ferrihemoglobin.
Normally one to two percent of a person's hemoglobin is methemoglobin; a higher percentage than this can be genetic or caused by exposure to various chemicals and depending on the level can cause health problems known as methemoglobinemia. A higher level of methemoglobin will tend to cause a pulse oximeter to read closer to 85% regardless of the true level of oxygen saturation.
Etymology
The word methemoglobin derives from the
Ancient Greek prefix
μετα- (meta-: behind, later, subsequent) and the word
hemoglobin.
The name hemoglobin is itself derived from the words heme and globin, each Protein subunit of hemoglobin being a globular protein with an embedded heme group.
Common causes of elevated methemoglobin
-
Reduced cellular defense mechanisms
-
Children younger than 4 months exposed to various environmental agents
-
Pregnant women are considered vulnerable to exposure of high levels of nitrates in drinking water
-
Cytochrome b5 reductase deficiency
-
G6PD deficiency
-
Hemoglobin M disease
-
Pyruvate kinase deficiency
-
Various pharmaceutical compounds
-
Local anesthetic agents, especially prilocaine and benzocaine.
-
Amyl nitrite, chloroquine, dapsone, nitrates, nitrites, nitroglycerin, nitroprusside, phenacetin, phenazopyridine, primaquine, quinones and sulfonamides
-
Environmental agents
-
Inherited disorders
-
Some family members of the Blue Fugates in Kentucky, due to a recessive gene, had blue skin from an excess of methemoglobin.
-
In cats
Therapeutic uses
Amyl nitrite is administered to treat cyanide poisoning. It works by converting
hemoglobin to methemoglobin, which allows for the binding of
cyanide (CN
–)
by
ferric (Fe
3+)
and the formation of cyanomethemoglobin. The immediate goal of forming this cyanide adduct is to prevent the binding of free cyanide to the
cytochrome a
3 group in cytochrome c oxidase.
Methemoglobin saturation
Methemoglobin is expressed as a concentration or a percentage. Percentage of methemoglobin is calculated by dividing the concentration of methemoglobin by the concentration of total hemoglobin. Percentage of methemoglobin is likely a better indicator of illness severity than overall concentration, as underlying medical conditions play an important role. For example, a methemoglobin concentration of 1.5 g/dL may represent a percentage of 10% in an otherwise healthy patient with a baseline hemoglobin of 15 mg/dL, whereas the presence of the same concentration of 1.5 g/dL of methemoglobin in an anemic patient with a baseline hemoglobin of 8 g/dL would represent a percentage of 18.75%. The former patient will be left with a functional hemoglobin concentration of 13.5 g/dL and potentially remain asymptomatic while the latter patient with a functional hemoglobin concentration 6.5 g/dL may be severely symptomatic with a methemoglobin of less than 20%.
[ ]
This may be further compounded by the "functional hemoglobin's" decreased ability to release oxygen in the presence of methemoglobin. Anemia, congestive heart failure, chronic obstructive pulmonary disease, and essentially any pathology that impairs the ability to deliver oxygen may worsen the symptoms of methemoglobinemia.
Blood stains
Increased levels of methemoglobin are found in blood stains. Upon exiting the body, bloodstains transit from bright red to dark brown, which is attributed to oxidation of oxy-hemoglobin (HbO
2) to methemoglobin (met-Hb) and
hemichrome (HC).
[Bremmer et al PLoS ONE 2011 http://www.plosone.org/article/info:doi/10.1371/journal.pone.0021845 ]
See also
-
Blue baby syndrome
-
Carboxyhemoglobin
-
Methemoglobinemia
External links
