Product Code Database
In infrared photography, the photographic film or image sensor used is sensitive to infrared light. The part of the visible spectrum used is referred to as near-infrared to distinguish it from far-infrared, which is the domain of thermal imaging. used for photography range from about 700 nanometre to about 900 nm. Film is usually sensitive to visible light too, so an infrared-passing filter is used; this lets infrared (IR) light pass through to the camera, but blocks all or most of the visible light spectrum. These filters thus look black (opaque) or deep red.
When these band-pass filter are used together with infrared-sensitive film or sensors, "" can be obtained, false-color or black-and-white images with a dreamlike or sometimes lurid appearance known as the Wood effect, an effect mainly caused by foliage (such as tree leaves and grass) strongly reflecting infrared in the same way visible light is reflected from snow. There is a small contribution from chlorophyll fluorescence, but this is marginal and is not the real cause of the brightness seen in infrared photographs. The effect is named after the infrared photography pioneer Robert W. Wood, and not after the material wood, which does not strongly reflect infrared.
The other attributes of infrared photographs include very dark skies and penetration of atmospheric haze, caused by reduced Rayleigh scattering and Mie scattering, respectively, compared to visible light. The dark skies, in turn, result in less infrared light in shadows and dark reflections of those skies from water, and clouds will stand out strongly. These wavelengths also penetrate a few millimeters into skin and give a milky look to portraits, although eyes often look black.
Infrared-sensitive photographic plates were developed in the United States during World War I for spectroscopic analysis, and infrared sensitizing dyes were investigated for improved haze penetration in aerial photography. After 1930, new emulsions from Kodak and other manufacturers became useful to infrared astronomy.
Infrared photography became popular with photography enthusiasts in the 1930s, when suitable film was introduced commercially. The Times regularly published landscape and aerial photographs taken by their staff photographers using Ilford Photo infrared film. By 1937, 33 kinds of infrared film were available from five manufacturers including Agfa, Kodak and Ilford. Infrared movie film was also available and was used to create day-for-night effects in motion pictures. A notable example being the pseudo-night aerial sequences in the movie The Bride Came C.O.D., starring James Cagney and Bette Davis.American Cinematographer 1941 Vol 22
False-color infrared photography became widely practiced with the introduction of Kodak Ektachrome Infrared Aero Film and Ektachrome Infrared EIR. The first version of this, known as Kodacolor Aero-Reversal-Film, was developed by Clark and others at the Kodak for camouflage detection in the 1940s. The EIR film became more widely available in the form of 35 mm film in the 1960s but has been since discontinued.
Infrared photography became popular with a number of 1960s recording artists, because of the unusual results; Jimi Hendrix, Donovan, Frank Zappa and the Grateful Dead all issued albums with infrared cover photos. The unexpected colors and effects that infrared film can produce fit well with the Psychedelic art aesthetic emerging in the 1960s.
Historically, black-and-white infrared films are sensitive to near infrared wavelengths shorter than approximately 860 nm, and retain significant sensitivity to blue wavelengths. Infrared-passing filters are used in black-and-white infrared photography to block blue wavelengths and limit the photograph to infrared wavelengths only. Without filters, infrared negative films look much like conventional negative films because the blue sensitivity lowers the contrast and effectively counteracts the infrared look of the film. Typically, a red filter (Wratten number #25) is recommended as the best compromise, which removes blue wavelengths while still passing enough visible light for focusing.
Instead of the Wratten number, some manufacturers embed the transition or cutoff wavelength in the name of the filter. For example, Hoya markets the R72 (720 nm cutoff, 750 nm 50% transition) and RM90 (900 nm cutoff) filters for infrared photography. B+W (Schneider Kreuznach) and Heliopan sell filters using glass sourced from Schott AG, including types RG695 (695 nm transition, considered approximately equivalent to Wratten #89B), RG715 (715 nm, #88A), RG780 (780 nm, #87), RG830, RG850, and RG1000.
Some lens manufacturers such as Leica Camera never put IR index marks on their lenses. The reason for this is that any index mark is only valid for one particular IR filter and film combination, and may lead to user error. Even when using lenses with index marks, focus testing is advisable as there may be a large difference between the index mark and the subject plane.
Most ('APO') lenses do not have an Infrared index mark and do not need to be refocused for the infrared spectrum because they are already optically corrected into the near-infrared spectrum. Catadioptric lenses do not often require this adjustment because their mirror containing elements do not suffer from chromatic aberration and so the overall aberration is comparably less. Catadioptric lenses do, of course, still contain lenses, and these lenses do still have a dispersive property.
When a SLR camera is fitted with a filter that is opaque to visible light, the reflex system becomes useless for both framing and focusing, one must compose the picture without the filter and then attach the filter. This requires the use of a tripod to prevent the composition from changing.
may scatter more light through their more complicated optical systems than , that is, lenses of fixed focal length; for example, an infrared photo taken with a 50 mm prime lens may have more contrast than the same image taken at 50 mm with a 28–80 zoom.
With some patience and ingenuity, most film cameras can be used. However, some cameras of the 1990s that used 35 mm film have infrared sprocket-hole sensors that can fog infrared film (their manuals may warn against the use of infrared film for this reason). Other film cameras are not completely opaque to infrared light.
Arguably the greatest obstacle to infrared film photography has been the difficulty of obtaining infrared-sensitive film. Kodak typically manufactured just one or two batches of infrared films per year. In addition, the popularity of digital photography has pushed film manufacturers to discontinue niche film products, including infrared-sensitive films. The discontinuance of Konica Infrared 750 (2006), Kodak High-Speed Infrared (2007), and Efke IR820 Aura (2012) has now narrowed the selection for black-and-white infrared film to Agfa Aviphot films, made for areal photography. These films are not available directly to consumers and must be purchased in large quantities and non-consumer formats. This film is often bought by large companies and sold in consumer quantities and formats under different brands, such as Rollei Infrared 400 film.
Infrared black-and-white films require special development times but exposed film can be processed using standard black-and-white photographic developers and chemicals, including D-76; the choice of chemical may affect the characteristic exposure/density curve. Kodak HIE film has a polyester film base that is very stable but extremely easy to scratch, therefore special care must be used in the handling of Kodak HIE throughout the development and printing/scanning process to avoid damage to the film.
Kodak HIE was sensitive to 900 nm. Other infrared black-and-white films include:
The structure of all color reversal films (both standard and infrared-sensitive) contains at least three separate densitometry layers. Each layer is specifically sensitized to respond to a different set of wavelengths; for instance, a standard color reversal film has red-, green-, and blue-sensitive layers. During the modern E-6 process of development, grains of silver halide that were sensitized by the appropriate wavelengths of light in each layer react with a redox agent to form metallic silver particles. The unexposed grains are then sensitized chemically during a second development step and produce oxidized developer, which react with dye coupler compounds embedded in the film emulsion layers to form negative images in various color , respective to how the silver halide was originally sensitized for each layer.
In conventional color films, the topmost (blue-sensitive) layer gets exposed to light prior to the green- and red-sensitive layers stacked behind it. Since the green- and red-sensitive layers also retain an inherent sensitivity to blue light, a yellow filter layer is placed behind the blue-sensitive layer, in front of the green and red-sensitive layers. This serves to minimize undesired passthrough of shorter wavelengths that are not supposed to expose the bottom layers.
During development, each emulsion layer forms a negative image in the appropriate subtractive color (cyan-magenta-yellow): the blue-sensitive layer forms a yellow-dyed ("minus-blue") negative image, the green-sensitive layer forms a magenta-dyed negative image, and the red-sensitive layer forms a cyan-dyed negative image. When the slide is viewed or projected by passing white light through these stacked layers, the visible wavelengths are filtered correspondingly with the reversed colors. For example, blue light will result in no yellow dye formation in the blue-sensitive layer, but cyan and magenta dye will form in the red- and green-sensitive layers. By projecting white light through the combined layers, blue is produced: cyan (aka negative-red) removes red and passes blue and green, and magenta (aka negative-green) removes green and passes blue and red; when these layers are stacked, only blue light is passed.
Since silver halides are sensitive to wavelengths of light outside of the visible range of the electromagnetic spectrum, longer wavelengths corresponding with infrared light can be captured by using suitable dyes. Without specialized dyes, silver halides are only sensitive to a wavelength shorter than around 450 nm.
Color infrared reversal films share a similar three-layer emulsion structure with conventional color reversal films, with the blue-sensitive layer replaced by an infrared-sensitive layer, and different dyes used for each of the layers. An external yellow photographic filter is used (Wratten number #12 or equivalent) to block the blue and violet wavelengths, which results in a false-color image by translating or remapping the captured spectrum (from green through infrared) to the visible spectrum: Infrared wavelengths are mapped to the red color, even though the infrared wavelengths are not normally visible. Similarly, visible red wavelengths are remapped to green, and visible green band wavelengths are remapped to blue. The filter and color remapping means visible blue and violet wavelengths are not captured. The infrared-sensitive layer will form cyan dyes (negative-red), while the green-sensitive layer will form yellow dyes (negative-blue) and the red-sensitive layer will form magenta dyes (negative-green).
The external yellow filter is used because each emulsion layer in color films (both conventional and infrared) has an inherent sensitivity for short-wavelength radiation (blue and violet visible wavelengths of light) due to the silver halide chemistry. Since there is no blue-sensitive layer, color infrared films also omit the internal yellow filter layer built into conventional color films to protect the following layers. This requires photographers to use an external blue-blocking filter to absorb blue and violet wavelengths of light, which gives the filter a yellow color.
Early color infrared films were developed in the older E-4 process, but Kodak later manufactured a color transparency film that could be developed in standard E-6 chemistry, although more accurate results were obtained by developing using the AR-5 process. Like HIE, EIR uses a clear polyester film base and must be loaded in complete darkness. In general, color infrared does not need to be refocused to the infrared index mark on the lens.
Kodak EIR loses its infrared sensitivity as it ages, giving photographs a cyan cast, as fewer grains in the infrared-sensitive (cyan-forming) layer will be sensitized. Anecdotally, EIR is most sensitive up to approximately 21 days after purchase, and stabilizes at a decreased sensitivity thereafter.
Also in 2007, Kodak announced that production of the 35 mm version of their color infrared film (Ektachrome Professional Infrared/EIR) would cease as there was insufficient demand.
In 2008, Los Angeles photographer, Dean Bennici started cutting and hand rolling Aerochrome color Infrared film. Most Aerochrome medium and large format which exists today came directly from his lab. The trend in infrared photography continues to gain momentum with the success of photographer Richard Mosse and multiple users all around the world.
Since 2011, all formats of color infrared film have been discontinued. Specifically, Aerochrome 1443 and SO-734.
There is no currently available digital camera that will directly produce the same results as Kodak color infrared film although equivalent images can be produced using a full spectrum converted infrared digital camera and a Kolari Vision Color IR Chrome lens filter. Similar effects can be achieved by taking two exposures, one infrared and the other full-color, and combining in post-production. A yellow (minus-blue) filter can also be used, which produces a single image that can also be post-processed to emulate the Ektachrome look. The color images produced by digital still cameras using infrared-pass filters are not equivalent to those produced on color infrared film. The colors result from varying amounts of infrared passing through the color filters on the photo sites, further amended by the Bayer filtering. While this makes such images unsuitable for the kind of applications for which the film was used, such as remote sensing of plant health, the resulting color tonality has proved popular artistically.
Color digital infrared, as part of full spectrum photography is gaining popularity. The ease of creating a softly colored photo with infrared characteristics has found interest among hobbyists and professionals.
Since the in most digital cameras may also absorb a significant fraction of the infrared light, converted cameras are sometimes not very sensitive to infrared wavelengths and can sometimes produce false colors in the images. An alternative approach is to use a Foveon X3 sensor, which does not have absorptive filters on it; the Sigma SD10 DSLR has a removable IR blocking filter and dust protector, which can be simply omitted or replaced by a deep red or complete visible light blocking filter. The Sigma SD14 has an IR/UV blocking filter that can be removed/installed without tools. The result is a very sensitive digital IR camera.
While it is common to use a filter that blocks almost all visible light, the wavelength sensitivity of a digital camera without internal infrared blocking is such that a variety of artistic results can be obtained with more conventional filtration. For example, a very dark neutral density filter can be used (such as the Hoya ND400) which passes a very small amount of visible light compared to the near-infrared it allows through. Wider filtration permits an SLR viewfinder to be used and also passes more varied color information to the sensor without necessarily reducing the Wood effect. Wider filtration is however likely to reduce other infrared artefacts such as haze penetration and darkened skies. This technique mirrors the methods used by infrared film photographers where black-and-white infrared film was often used with a deep red filter rather than a visually opaque one.
Phase One digital camera backs can be ordered in a modified form suited for infrared photography.
Several Sony cameras had a feature branded as Night Shot, which physically moves the blocking filter away from the light path, making the cameras very sensitive to infrared light. Soon after its development, this facility was 'restricted' by Sony to make it difficult for people to take photos that saw through clothing. To do this the iris is opened fully and exposure duration is limited to long times of more than 1/30 second or so. It is possible to shoot infrared but neutral density filters must be used to reduce the camera's sensitivity and the long exposure times mean that care must be taken to avoid camera-shake artifacts.
Fujifilm have produced digital cameras for use in forensic criminology and medicine which have no infrared blocking filter. The first camera, designated the S3 PRO UVIR, also had extended ultraviolet sensitivity (digital sensors are usually less sensitive to UV than to IR). Optimum UV sensitivity requires special lenses, but ordinary lenses usually work well for IR. In 2007, Fujifilm introduced a new version of this camera, based on the Nikon D200/ FujiFilm S5 called the IS Pro, also able to take Nikon lenses. Fuji had earlier introduced a non-SLR infrared camera, the IS-1, a modified version of the FujiFilm FinePix S9100. Unlike the S3 PRO UVIR, the IS-1 does not offer UV sensitivity. FujiFilm restricts the sale of these cameras to professional users with their EULA specifically prohibiting "unethical photographic conduct".
Remote sensing and thermographic cameras are sensitive to longer wavelengths of infrared (see ). They may be multispectral and use a variety of technologies which may not resemble common camera or filter designs. Cameras sensitive to longer infrared wavelengths including those used in infrared astronomy often require cooling to reduce thermally induced dark currents in the sensor (see Dark current (physics)). Lower cost uncooled thermographic digital cameras operate in the Long Wave infrared band (see Thermographic camera). These cameras are generally used for building inspection or preventative maintenance but can be used for artistic pursuits as well, such as this image of a cup of coffee.
Some photographers use orange or red filters to allow slight amounts of blue wavelengths to reach the film, and thus lower the contrast. The majority of black-and-white infrared art, landscape, and wedding photography is done using orange (Wratten #15 or 21), red (#23, 25, or 29) or visually opaque (#72) filters over the lens to block the blue visible light from the exposure. Very dark-red (#29) filters block out almost all blue, and visually opaque (#70, 89b, 87c, 72) filters block out all blue and also visible red wavelengths, resulting in a more pure-infrared photo with a more pronounced contrast.
+Wratten IR filter nos.
! Wratten number !! 50% (nm) 530 560 580 600 620 675 720 735 740 750 795 850 930 1050
Focusing infrared
Many manual focus lenses for 35 mm single-lens reflex cameras (SLR) and medium format SLR have a red dot, line or diamond, often with a red "R" called the infrared index mark, which can be used to achieve proper infrared focus; many autofocus lenses no longer have this mark. For these lenses, after visual focus is achieved for the intended subject, the distance indicated by the visual focusing mark is then re-set to the infrared index mark.Joseph David Cooper (1974). 9780817405663, American Photographic Book Publishing Company, Inc.. ISBN 9780817405663 Without refocusing, a sharp infrared photograph can be taken by proper hyperfocal settings, which generally requires a tripod, a narrow aperture (like ); however, wider apertures like can produce sharp photos when the lens is meticulously refocused to the infrared index mark, and only if this index mark is the correct one for the filter and film in use. Airy disk effects inside a camera are greater at infrared wavelengths so that stopping down the lens too far may actually reduce sharpness.
Film cameras
Many conventional cameras can be used for near-infrared photography, where the portion of the infrared is light of a wavelength only slightly longer than that of visible light. Photography of the far-infrared spectrum with longer wavelengths is called thermography and requires special equipment.
Black-and-white infrared film
Black-and-white infrared negative films are sensitive to wavelengths in the 700 to 900 nm near infrared spectrum, and most also have an inherent sensitivity to blue light wavelengths. Kodak High-Speed Infrared (HIE), which produced negatives for photographic prints, was one of the most common black-and-white infrared films used. Because HIE was so prevalent, black-and-white infrared photographs have been associated with a notable halation effect or glow often seen in the highlights, similar to the soft focus effect of uncorrected spherical aberration. This halation is an artifact of the clear polyester film base used for HIE and not inherent to infrared photography; it is caused by the absence of an anti-halation layer on the back side of Kodak HIE film, which results in a scattering or blooming around the highlights that would usually be absorbed by the anti-halation layer in conventional films. In addition, the clear backing means that Kodak HIE must only be loaded and unloaded in total darkness.
Color infrared film
Like HIE, the most commonly used infrared color reversal film, also called transparency or slide film, was manufactured by Kodak and sold as Ektachrome Infrared (EIR), under code 2236, packaged as a 36-exposure roll; in addition, Kodak made EIR in bulk lengths (for the motion picture industry) and the similar Aerochrome III Infrared for aerial photography (codes 1443 and SO-734). EIR originally was developed during World War II as a means to detect camouflaged objects, taking advantage of the difference in infrared reflectance between plants and green paint, and was adopted by the military and scientific communities after the war. It was not marketed to consumers until the 1960s. To improve camouflage paint, companies began incorporating infrared-reflecting materials.
+Comparison of color reversal film structure (E-6 process)
! colspan=3 Conventional
! colspan=4 Infrared
Availability
Kodak discontinued production of HIE Infrared 35 mm film at the end of 2007, stating that, "Demand for these products has been declining significantly in recent years, and it is no longer practical to continue to manufacture given the low volume, the age of the product formulations and the complexity of the processes involved." At the time it was discontinued, HIE Infrared 135-36 was available at a street price of around $12.00 a roll at US mail order outlets.
Digital cameras
Hot mirror removal
One method of infrared photography using digital cameras is to remove the infrared blocker in front of the sensor and replace it with a glass cover that either removes or restricts visible light (infrared-only conversion) or one that passes infrared wavelengths ("full spectrum" conversion). This filter is behind the mirror of , so the camera can be used normally - handheld, normal shutter speeds, normal composition through the viewfinder, and focus, all work like a normal camera. Metering works but is not always accurate because of the difference between visible and infrared refraction. When the IR blocker is removed, many lenses which did display a hotspot cease to do so, and become perfectly usable for infrared photography. Additionally, because the red, green and blue micro-filters remain and have transmissions not only in their respective color but also in the infrared, enhanced infrared color may be recorded.
Post-processing
Another common technique with near-infrared filters is to swap blue and red channels in software (e.g. Adobe Photoshop), which retains much of the characteristic "white foliage" while rendering skies a glorious blue.
Applications and specific implementations
See also
Notes
External links
|
|
