Comminution is the reduction of solid from one average particle size to a smaller average particle size, by Crusher, grinding, cutting, vibrating, or other processes.
For example, a pulverizer mill is used to pulverize coal for combustion in the steam-generating furnaces of coal power plants. A cement mill produces finely ground ingredients for portland cement.
In geology, comminution refers to a natural process during faulting in the upper part of the Earth's crust.
Energy requirements
The comminution of solid materials consumes energy.
Approximately 65% of the power for the production of cement is consumed in comminution.
The comminution energy can be estimated by:
-
Rittinger's law, which assumes that the energy consumed is proportional to the newly generated surface area;
-
Kick's law, which related the energy to the sizes of the feed particles and the product particles;
[Kick, F.M. Das Gesetz der proportionalen Widerstände und seine anwendung felix. Leipzig, Germany. 1885.]
-
Bond's law, which assumes that the total work useful in breakage is inversely proportional to the square root of the diameter of the product particles, implying theoretically that the work input varies as the length of the new cracks made in breakage.
[Bond, Fred C. (1975) It Happened to Me, Ch. 130. Amazon.com. Retrieved May 29, 2011.][Bond, F.C. The third theory of comminution.Trans. AIME, vol. 193, 1952.
]
pp. 484–494.
-
Holmes's law, which modifies Bond's law by substituting the square root with an exponent that depends on the material.
Three forces are typically used to effect the comminution of particles: impact, Shear stress, and compression.
Methods
There are several methods of comminution. Comminution of solid materials requires various types of
and mills depending on the feed properties such as hardness at various size ranges and application requirements such as throughput and maintenance. The most common machines for the comminution of coarse feed material (primary crushers) are the
jaw crusher (1m > P
80 > 100 mm),
cone crusher (P
80 > 20 mm) and
hammer crusher. Primary crusher products in intermediate feed particle size ranges (100mm > P80 > 20mm) can be ground in autogenous (AG) or semi-autogenous (SAG) mills depending on feed properties and application requirements. For comminution of finer particle size ranges (20mm > P
80 > 30 μm) machines like the ball mill, vertical roller mill, hammer mill, roller press or high compression roller mill, vibration mill, jet mill and others are used. For yet finer grind sizes (sometimes referred to as "ultrafine grinding"), specialist mills such as the
IsaMill are used.
Trituration, for instance, is comminution (or substance breakdown) by rubbing. Furthermore, methods of trituration include levigation, which is the trituration of a powder with a non-solvent liquid, and pulverization by intervention, which is trituration with a solvent that can be easily removed after the substance has been broken down.
See also
-
Electromagnetic vortex intensifier with ferromagnetic particles - Special equipment for ultrafine grinding
-
Burr mill
External links
