Clapboard

 ( Building Materials ) 

Clapboard /ref>), also called bevel siding, lap siding, and weatherboard, with regional variation in the definition of those terms, is wooden siding of a building in the form of horizontal boards, often overlapping.

Clapboard, in modern American usage, is a word for long, thin boards used to cover outer walls and (formerly) roofs of buildings. Historically, it has also been spelled clawboard and cloboard.Whitney, William Dwight. "Clapboard" def. 1. The Century dictionary; an encyclopedic lexicon of the English language,. New York: The Century Co., 188991. Print. In the United Kingdom, Australia and New Zealand, the term weatherboard is used. Australians also use the term chamferboard for the tongue-and-groove variant.

An older meaning of clapboard is small split pieces of oak imported from Germany for use as barrel staves, and the name is a partial translation (from klappen, "to fit") of Middle Dutch klapholt and related to German Klappholz.

---

Types

---

Riven Clapboards were originally wood splitting radially by hand producing triangle or "feather-edged" sections, attached thin side up and overlapped thick over thin to shed water. Heart side of boards. PopularWoodworking.com.

---

Radially sawn Later, the boards were rift sawing in a type of sawmill called a clapboard mill, producing wood grain clapboards. The more commonly used boards in New England are vertical-grain boards. Depending on the diameter of the log, cuts are made from deep along the full length of the log. Each time the log turns for the next cut, it is rotated until it has turned 360°. This gives the radially sawn clapboard its taper and true vertical grain.

---

Flat-sawn Flat-grain clapboards are cut tangent to the annual growth rings of the tree. As this technique was common in most parts of the British Isles, it was carried by immigrants to their colonies in the Americas and in Australia and New Zealand. Flat-sawn wood Wood warping more and does not hold paint as well as radially sawn wood.

---

Chamferboard Chamferboards are an Australian form of weatherboarding using tongue-and-groove joints to link the boards together to give a flatter external appearance than regular angled weatherboards.

---

Finger jointed Some modern clapboards are made up of shorter pieces of wood together with an adhesive.

---

Wood species In North America clapboards were historically made of split oak, pine and spruce. Modern clapboards are available in red cedar and pine.

In some areas, clapboards were traditionally left as raw wood, relying upon good air circulation and the use of 'semi-hardwoods' to keep the boards from rotting. These boards eventually go grey as the tannins are washed out from the wood. More recently clapboard has been tarred or painted—traditionally black or white due to locally occurring minerals or pigments. In modern clapboard these colors remain popular, but with a hugely wider variety due to chemical pigments and stains.

Clapboard houses may be found in most parts of the British Isles, and the style may be part of all types of traditional building, from cottages to windmills, shops to workshops, as well as many others.

Clapboard is always referred to as weatherboard in New Zealand, where that type of cladding dominated in buildings constructed before 1960. After the big earthquakes of 1855 and 1931, wooden buildings were perceived as being less vulnerable to damage, and weatherboard walls with a corrugated iron roof was found to be a cost-effective building style.

Newer, cheaper designs often imitate the form of clapboard construction as siding made of vinyl siding (uPVC), aluminum, fiber cement, or other man-made materials. These materials can provide a lightweight alternative to wooden cladding.

---

See also

• Clinker (boat building)
• Shiplap
• Siding § Wood siding
• Tongue and groove

---

External links

• Research report containing photos of a clapboard roof in Virginia, U.S.A.

Post Comment