Product Code Database
In molecular biology, biochips are engineered substrates ("miniaturized laboratories") that can host large numbers of simultaneous biochemical reactions. One of the goals of biochip technology is to efficiently screen large numbers of biological , with potential applications ranging from disease diagnosis to detection of bioterrorism agents. For example, digital microfluidic biochips are under investigation for applications in biomedical fields. In a digital microfluidic biochip, a group of (adjacent) cells in the microfluidic array can be configured to work as storage, functional operations, as well as for transporting fluid droplets dynamically.
In 1953, Watson and Francis Crick announced their discovery of the now familiar double helix structure of DNA molecules and set the stage for genetics research that continues to the present day.D. L. Nelson and M. M. Cox, Lehninger Principles of Biochemistry, Worth Publishers, New York, 2000 The development of sequencing techniques in 1977 by Walter GilbertA. M. Maxam and W. Gilbert, "A new method for sequencing DNA," Proc. Natl. Acad. Sci. 74, pp. 560–564, 1977 and Frederick SangerF. Sanger, S. Nicklen, and A. R. Coulson, "DNA sequencing with chainterminating inhibitors," Proc. Natl. Acad. Sci. 74, pp. 5463–5467, 1977 (working separately) enabled researchers to directly read the genetic codes that provide instructions for protein synthesis. This research showed how hybridization of complementary single oligonucleotide strands could be used as a basis for DNA sensing. Two additional developments enabled the technology used in modern DNA-based. First, in 1983 Kary Mullis invented the polymerase chain reaction (PCR) technique, a method for amplifying DNA concentrations. This discovery made possible the detection of extremely small quantities of DNA in samples. Secondly in 1986 Hood and co-workers devised a method to label DNA molecules with instead of radiolabels,L. M. Smith, J. Z. Sanders, R. J. Kaiser, P. Hughes, C. Dodd, C. R. Connell, C. Heiner, S. B. H. Kent, and L. E. Hood, "Fluorescence detection in automated DNA sequence analysis," Nature 321, pp. 61–67, 1986 thus enabling hybridization experiments to be observed optically.
[[image:Biochip platform.jpg|thumb|right|300px|Figure 1. Biochips are a platform that require, in addition to microarray technology, transduction and signal processing
technologies to output the results of sensing experiments.]]
Figure 1 shows the make up of a typical biochip platform. The actual sensing component (or "chip") is just one piece of a complete analysis system. Transducer must be done to translate the actual sensing event (DNA binding, redox, etc.) into a format understandable by a computer (voltage, light intensity, mass, etc.), which then enables additional analysis and processing to produce a final, human-readable output. The multiple technologies needed to make a successful biochip—from sensing chemistry, to , to signal processing—require a true multidisciplinary approach, making the barrier to entry steep. One of the first commercial biochips was introduced by Affymetrix. Their "GeneChip" products contain thousands of individual DNA sensors for use in sensing defects, or single nucleotide polymorphisms (SNPs), in genes such as p53 (a tumor suppressor) and BRCA1 and BRCA2 (related to breast cancer).P. Fortina, D. Graves, C. Stoeckert, Jr., S. McKenzie, and S. Surrey in Biochip Technology, J. Cheng and L. J. Kricka, eds., ch. Technology Options and Applications of DNA Microarrays, pp. 185–216, Harwood Academic Publishers, Philadelphia, 2001 The chips are produced by using microlithography techniques traditionally used to fabricate integrated circuits (see below).
Fodor and colleagues developed a unique fabrication process (later used by Affymetrix) in which a series of microlithography steps is used to combinatorially synthesize hundreds of thousands of unique, single-stranded DNA sensors on a substrate one nucleotide at a time.S. P. Fodor, J. L. Read, M. C. Pirrung, L. Stryer, A. T. Lu, and D. Solas, "Light-directed, spatially addressable parallel chemical analysis," Science 251, pp. 767–773, 1991A. C. Pease, D. Solas, E. J. Sullivan, M. T. Cronin, C. P. Holmes, and S. P. Fodor, "Light-generated oligonucleotide arrays for rapid DNA sequence analysis," Proc. Natl. Acad. Sci. 91, pp. 5022–5026, 1994 One lithography step is needed per base type; thus, a total of four steps is required per nucleotide level. Although this technique is very powerful in that many sensors can be created simultaneously, it is currently only feasible for creating short DNA strands (15–25 nucleotides). Reliability and cost factors limit the number of photolithography steps that can be done. Furthermore, light-directed combinatorial synthesis techniques are not currently possible for proteins or other sensing molecules.
As noted above, most microarrays consist of a Cartesian grid of sensors. This approach is used chiefly to map or "encode" the coordinate of each sensor to its function. Sensors in these arrays typically use a universal signalling technique ( e.g. fluorescence), thus making coordinates their only identifying feature. These arrays must be made using a serial process ( i.e. requiring multiple, sequential steps) to ensure that each sensor is placed at the correct position.
"Random" fabrication, in which the sensors are placed at arbitrary positions on the chip, is an alternative to the serial method. The tedious and expensive positioning process is
not required, enabling the use of parallelized self-assembly techniques. In this approach, large batches of identical sensors can be produced; sensors from each batch are then combined and assembled into an array. A non-coordinate based encoding scheme must be used to identify each sensor. As the figure shows, such a design was first demonstrated (and later commercialized by Illumina) using functionalized beads placed randomly in the wells of an etched fiber optic cable.F. J. Steemers, J. A. Ferguson, and D. R. Walt, "Screening unlabeled DNA targets with randomly-ordered fiber-optic gene arrays," Nature Biotechnology 18, pp. 91–94, 2000K. L. Michael, L. C. Taylor, S. L. Schultz, and D. R. Walt, "Randomly ordered addressable high-density optical sensor arrays," Analytical Chemistry 70, pp. 1242–1248, 1998 Each bead was uniquely encoded with a fluorescent signature. However, this encoding scheme is limited in the number of unique dye combinations that can be used and successfully differentiated.
In sandwich assays an enzyme-labelled antibody is used; in competitive assays an enzyme-labelled antigen is used. On antibody-antigen binding a chemiluminescence reaction produces light. Detection is by a charge-coupled device (CCD) camera. The CCD camera is a sensitive and high-resolution sensor able to accurately detect and quantify very low levels of light. The test regions are located using a grid pattern then the chemiluminescence signals are analysed by imaging software to rapidly and simultaneously quantify the individual analytes.
Biochips are also used in the field of microphysiometry e.g. in skin-on-a-chipAlexander, F., Eggert, S., Wiest, J.: Skin-on-a-chip: Transepithelial electrical resistance and extracellular acidification measurements through an automated air-liquid interface, Genes, 2018, 9/2, 114; applications.
For details about other array technologies, see Antibody microarray.
Microarray fabrication
The microarray—the dense, two-dimensional grid of biosensors—is the critical component of a biochip platform. Typically, the sensors are deposited on a flat substrate, which may either be passive ( e.g. silicon or glass) or active, the latter
consisting of integrated electronics or microtechnology devices that perform or assist signal transduction. Surface chemistry is used to covalent bond the sensor molecules to the substrate medium. The fabrication of microarrays is non-trivial and is a major economic and technological hurdle that may ultimately decide the success of future biochip platforms. The primary manufacturing challenge is the process of placing each sensor at a specific position (typically on a Cartesian grid) on the substrate. Various means exist to achieve the placement, but typically robotic micro-pipettingM. Schena, D. Shalon, R. W. Davis, and P. O. Brown, "Quantitative monitoring of gene expression patterns with a complementary DNA microarray," Science 270, pp. 467–470, 1995 or micro-printingG. MacBeath, A. N. Koehler, and S. L. Schreiber, "Printing small molecules as microarrays and detecting protein-ligand interactions en masse," J. Am. Chem. Soc. 121, pp. 7967–7968, 1999 systems are used to place tiny spots of sensor material on the chip surface. Because each sensor is unique, only a few spots can be placed at a time. The low-throughput nature of this
process results in high manufacturing costs.
Protein biochip array and other microarray technologies
are not limited to DNA analysis; protein microarrays, antibody microarray, chemical compound microarray can also be produced using biochips. Randox Laboratories Ltd. launched Evidence, the first protein Biochip Array Technology analyzer in 2003. In protein Biochip Array Technology, the biochip replaces the ELISA plate or cuvette as the reaction platform. The biochip is used to simultaneously analyze a panel of related tests in a single sample, producing a patient profile. The patient profile can be used in disease screening, diagnosis, monitoring disease progression or monitoring treatment. Performing multiple analyses simultaneously, described as multiplexing, allows a significant reduction in processing time and the amount of patient sample required. Biochip Array Technology is a novel application of a familiar methodology, using sandwich, competitive and antibody-capture . The difference from conventional immunoassays is that, the capture ligands are covalently attached to the surface of the biochip in an ordered array rather than in solution.
Types
There are several types of biotechnology chips, each designed for specific applications.
DNA microarrays
are perhaps the most widely used biotechnology chips. They consist of glass slides, silicon substrates, or polymer-based supports that can bind to specific DNA sequences. Researchers use DNA microarrays to detect gene expression, analyze genetic variation, and explore gene function.
Protein chips
(also known as proteomics chips) are designed to detect and analyze . These chips contain arrays of immobilized proteins or antibodies, which can be used for profiling protein interactions, identification, and quantification.
Lab-on-a-chip (LOC)
Lab-on-a-chip (LOC) devices integrate multiple laboratory functions into a single chip. These chips incorporate sample preparation, reaction, analysis, and detection into one compact platform. LOC devices are used for clinical diagnostics, environmental monitoring, and chemical analysis.
Cell chips
Cell chips are designed to grow and analyze living cells. They provide a platform for studying cellular behavior, , and cell signaling. These chips allow high-throughput screening of potential drugs and treatments for various diseases.
Microfluidic chips
Microfluidic chips manipulate tiny amounts of liquids and gases in channels with micro-scale dimensions. These chips are used for a variety of biological applications, including PCR amplification, cell sorting, and DNA sequencing.
Applications
Biotechnology chips have a wide range of applications across many fields.
Medical diagnostics
Biotechnology chips are widely used in medical diagnostics for detecting diseases such as cancer, , and . These chips can rapidly analyze samples of blood, saliva, or tissue to detect genetic mutations, , and .
Drug development and personalized medicine
Biotechnology chips play a key role in the drug development. They enable high-throughput screening of potential drug compounds and help identify biomarkers for personalized treatment plans. Additionally, the use of biotechnology chips allows for more efficient testing of drug efficacy and safety.
Genomics and proteomics
Biotechnology chips are used in genomics and proteomics research. DNA microarrays and protein chips enable scientists to analyze large amounts of genetic and protein data simultaneously. These chips facilitate the study of gene expression, genetic variation, and protein interactions, advancing the understanding of complex biological systems.
Environmental monitoring
Lab-on-a-chip and microfluidic devices are also used for environmental monitoring. These chips can test water, air, and soil samples for contaminants, pathogens, and toxins. Their portable nature allows for on-site analysis, making them valuable for environmental research and disaster response.
Agricultural biotechnology
Biotechnology chips are used in agricultural research to analyze crops, monitor soil health, and study plant pathogens. They enable more efficient and precise breeding programs, improving crop yield, pest resistance, and disease prevention.
See also
|
|
