Product Code Database
A bezel is a wider and usually thicker section of the hoop of a ring, which may contain a gemstone or a flat surface (usually with an engraved design, as in a signet ring).McConnell, 104. Rings are normally worn to display bezels on the upper or outer side of the finger. In gem-cutting the term bezel is used for those sloping facets (also called sides or faces) of a cut stone that surround the flat table face,OED, "Bezel" noun, 1 and 2; "In lapidary usage, the oblique sides or faces of a cut gem", Campbell. which is the large, horizontal facet on the top.
More broadly, bezels are found on tools and appliances. The sloping face of a chisel is known as a bezel. In vehicles, it is the part of the bodywork that surrounds a headlight or turn signal. On a cell phone or tablet, it is the back surface that frames the LCD screen.Strange, Adario (July 11, 2013). "LG intros world's thinnest smartphone screen" . DVICE.
The word may also refer to a bezel setting for a stone, which is a general term for a Stonesetting holding the stone in place with a raised metal rim for the stone, the rim's lip encircling and overlapping the edges of the stone, thus holding it in place."A bezel setting is a metal rim that holds the gem in a finger ring. The term is used in a transferred sense by horologists to denote the ring that secures the glass in a watch or clock, and by metal specialists to describe the ring inside the lid of silver and pewter objects", Campbell. Modern bezel settings typically use a band of metal containing a groove and a flange (i.e. projecting lip) to hold a watch crystal or gemstone in its setting. This was the earliest method of setting gemstones into jewelry. In historic examples, such rings were often made by leaving a hole or slot in the ring with a thin lip which was bent over once the stone was inserted, holding it in place.
Other types of bezel settings, less used in modern jewelry, are swivel bezels where the bezel, perhaps just formed of a stone with a metal rod through it, can rotate, and box bezels, where a "box" or cage forms the bezel, often sitting on the main ring hoop, and perhaps open at the top where there is a stone.Examples in the British Museum, with descriptions: Gold ring with movable circular box-bezel decorated with a griffin (also swivels); box bezel, no stone ; The "Ashburnham Ring", with swivel bezel .
The noun meaning "slope of the edge of a cutting tool," and also "groove by which a stone is held in its setting" was from the 1610s. The verb meaning "grind (a tool) down to an edge" is from 1670s.
The noun meaning "oblique face of a gem" is from .
A cabochon stone, a gemstone that is not faceted, usually relies on the shallow angle cut into the side of the stone, which helps the metal to stay in place. With a clear, stone, such as a diamond, a shallow groove is cut into the bezel itself. The girdle, or widest part of the gemstone, is placed in the bezel, which is then pushed down over the girdle. The pressure of the bezel over the edge keeps the stone in place.
Bezel settings for diamonds are also called rub-over settings; they have a diamond completely surrounded by a precious metal band which fastens the diamond securely into place. Bezel settings use a type of elevated collar which wraps the rim of the diamond in a complete metal edging. This type of diamond ring setting is the most secure fastener for the stones. The bezel setting also protects the diamond better than other types of settings, such as the prong setting. A flush setting for diamond rings is a variation on the rub-over or bezel setting. In the flush setting, the stone is placed into an opening and affixed at the bottom of the stone. The top of the diamond is extended above the base.
Etymology
The word bezel, with an earliest attribution from 1605 to 1615, derives from the Old French *besel (13c.; Modern French biseau), cognate with Spanish and Portuguese bisel; of uncertain origin, perhaps literally "a stone with two angles," from Vulgar Latin * bis-alus, from bis- "twice" (from PIE root * dwo- "two") + ala "wing, side" (see alar). Bezel is akin to French biseau, meaning bevel or chamfer.
Bezel settings
In making a typical modern bezel setting, the bezel is shaped into the size and shape of the gem and then soldered into place on the metal of the jewelry. The prepared stone is then placed into the bezel and the metal is pressed down over the edges of stone, locking it into place.
Bezel setting advantages
One advantage of the bezel setting, as compared to the prong setting, is that the diamond is better protected from accidental rubbing or blows, and is less likely to allow the diamond to scratch whatever it may come into contact with. The bezel setting is also more secure, so the diamond is less likely to be dislodged.
Watch bezel
An extension of the term bezel setting can refer to a rotatable rim on a clock or watch used to indicate certain data such as elapsed time. Oxford English Dictionary (all editions to 2013), "Bezel", n. 3. However the OED definition misses the primary sense given in its own citations, such as: "1616 J. Bullokar Eng. Expositor, Bezill, the broad part of a ring, in which the stone or signet is set.", only defining it as "The groove and projecting flange or lip by which the crystal of a watch or the stone of a jewel is retained in its setting." For examples of "bezel" referring to flat, thick parts of rings with no gems, flanges or lips see the over 2,000 uses of the word (in records with images) in the British Museum collection database . Webster's New World College Dictionary (2005)
Citations
Sources
|
|
