Product Code Database
Storz is a type of hose coupling invented by in 1882, patented in Switzerland in 1890 and in the U.S. in 1893 that connects using interlocking hooks and flanges. It was first specified in standard FEN 301-316, and has been used by German fire brigades since 1933. (See German delivery hose article.) Amongst other uses, it has been widely employed on in firefighting applications. It is the standard coupling on fire hoses in Portugal, Denmark, Slovenia, Germany, Austria, Switzerland, Sweden, the Netherlands, Poland, Czechia, Israel, Croatia, Serbia, Bosnia and Herzegovina, Macedonia, Montenegro and Greece.T.O.T.E.E. 2451/86 Εγκαταστάσεις σε κτήρια: Μόνιμα πυροσβεστικά συστήματα με νερό, Technical Chamber of Greece, 1986, pp. 12, 15, 20. It is also one of the standard couplings on fire hoses in Australia and the United States.
The Storz coupling system is also widely used for filling of bulk wood pellet storage systems in Europe (Storz-A or size), although in France and Belgium the similar but not completely symmetric Guillemin coupling is more commonly employed.
Storz connectors are usually made of brass or aluminium. They can be manufactured by casting for general hose connection and low pressure applications, but for firefighting, it is better to use to guarantee the safety and durability of the coupling.
It is sometimes referred to as a sexless coupling, because rather than having a male and a female end connected by , either identical end can be joined to any other end of the same diameter. This is also called hermaphrodite or two-way connection. To couple a Storz connection, the two opposing couplings are pressed together such that the hooks of each one are inserted into the slots in the flange of the other. Then they are rotated in opposite directions until they are tight. This creates a watertight connection between the internal packing gaskets. To uncouple them, the connectors are turned in the opposite directions from coupling, and then separated when the hooks and slots are aligned. Special are designed for assisting with use of Storz connectors.
The main benefit to using Storz couplings is speed of hose connection, as a hose can be locked with a quarter-turn. By comparison, locking hoses using threaded couplings often takes several turns. Because of this, Storz couplings are widely viewed as a safer alternative to using threaded couplings. A secondary benefit over threaded couplings is that the connecting faces and hooks are less prone to damage if the coupling is dropped onto, or dragged over, a hard surface. As the hooks are inside the housing, they are less prone to damage or catching onto obstacles.
Storz couplers are available commercially in the following non-DIN-specified sizes:
DIN standards define the following pressure couplings:
| D | 25 | 31 | 14301 | 25 | Germany |
| S28 | 52 | 66 | 14330-2 | 28 | Germany |
| S32 | 14330-1 | 32 | Germany | ||
| C42 | 14332 | 42 | Germany | ||
| C52 | 14302 | 52 | Germany | ||
| B | 75 | 89 | 14303 | 75 | Germany |
| A | 110 | 133 | 14300 | 110 |
DIN standards define the following suction couplings:
| D | 25 | 31 | 14301 | 15, 19, 25 | |
| C | 52 | 66 | 14321 | 19, 25, 32, 38, 42, 45, 52, 64 | |
| B | 75 | 89 | 14322 | 52, 65, 70, 75 | |
| A | 110 | 133 | 14323 | 102, 110 | Germany |
DIN standards define the following fixed couplings (for securing fittings to hoses):
| D | 25 | 31 | Rubber gasket | 14306 | |
| C | 52 | 66 | Rubber gasket | 14307 | |
| Integral metal seat | 14317 | ||||
| B | 75 | 89 | Rubber seal | 14308 | |
| Integral metal seat | 14318 | ||||
| A | 110 | 133 | Rubber gasket | 14309 | |
| Integral metal seat | 14319 |
DIN standards define the following threaded adapters:
| D | 25 | 31 | BSP 1″ | 14306 |
| C | 52 | 66 | BSP 2″ | 14307 |
| B | 75 | 89 | BSP ″ | 14308 |
| A | 110 | 133 | BSP ″ | 14309 |
DIN standards define the following caps:
| D | 25 | 31 | 14310 |
| C | 52 | 66 | 14311 |
| B | 75 | 89 | 14312 |
| A | 110 | 133 | 14313 |
DIN standards define the following swivel reducers:
| C | 52 | 66 | D | 25 | 31 | 14341 |
| B | 75 | 89 | C | 52 | 66 | 14342 |
| A | 110 | 133 | B | 75 | 89 | 14343 |
The 100 mm (4-inch) and 125 mm (5-inch) Storz couplers have been specified in NFPA 1963, Standard for Fire Hose Connections, since the 1993 edition.
U.S. cities that have fire hydrants with 125 mm Storz connectors include Raleigh, NC and the City of Corvallis, OR (adapter on 4-inch threaded outlet).
The 150 mm (6-inch) size is occasionally used for PVC suction hose, in place of the industry-standard 6 NH threads.
|
|
