Stab-Lok is a brand name of electrical circuit breakers that were manufactured primarily by Federal Pacific Electric from 1950 to 1980. In June 1980, Reliance Electric, which had purchased FPE, reported to the United States Consumer Product Safety Commission that "many FPE circuit breakers did not fully comply with Underwriters Laboratories, Inc. (UL) requirements. Commission testing confirmed that these breakers fail certain UL calibration test requirements." In 2018 it was reported that Stab-Lok breakers and panels, made by FPE and other companies, were still in use, and it was recommended that they be removed as a potential fire hazard.
According to a 2012 news report by NBC Bay Area (KNTV):
According to an independent analysis performed by Jesse Aronson, P.E.:
According to ANGI Homeservices, formerly known as Angie's List,
Angie's List and NBC Bay Area both highlighted an October 2002 ruling in a New Jersey Superior Court, which found that FPE (Federal Pacific Electric), the manufacturer of the Stab-Lok breakers and panels, "knowingly and purposefully sic distributed circuit breakers which were not tested to meet UL standards as indicated on their label".
After a two-year investigation into whether these test failures would create a "serious risk of injury to consumers", the CPSC closed the investigation, citing a lack of budget to continue:
CPSC urged consumers to remain vigilant and report any failed breakers or equipment so it could continue to collect data.
Other companies began building Stab-Lok style breakers through around 1990. According to a Washington Post article, home inspection professionals now routinely advise consumers to remove and replace those panels that remain in service.
|
|