Product Code Database
SH-AWD can vary torque side to side through the rear wheels. This ability to drive one of the rear wheels with more power is accomplished through overdriving the rear wheels with respect to the front wheels. The Acura RL is designed with a third planetary gear set and clutch pack that are packaged into a so-called "Acceleration Device", which is bolted in front of the rear differential unit. The Acceleration Device allows torque to be passed to the rear wheels at a near one to one ratio, but in cornering situations, the Acceleration Device variably increases the torque passed to the rear up to 5%, depending on the cornering situation.
As of early 2010, SH-AWD has been implemented by Acura in two functionally similar, but mechanically different configurations, with and without Acceleration Device. The more complex SH-AWD version uses the Acceleration Device and can be found in:
The less complex version of SH-AWD omits the Acceleration Device and can be found in:
SH-AWD in the Acura RDX and Acura MDX uses a default power split of 90% to the front and 10% to the rear. Like the unit in the RL, both can power the rear wheels with various amounts engine torque. The power split under straight-line, high-speed acceleration varies from vehicle to vehicle. In addition, in cornering situations, dependent on the specific vehicle balance and dynamics, the rearward power transfer ratios in the RDX and MDX differ greatly from the RL and TL sedans.
SH-AWD differs in function from other popular all-wheel drive systems, like Audi’s popular Quattro. For example, when it comes to torque distribution, SH-AWD is front-biased (with the exception of the performance oriented UB5 TLX Type S) but Audi's Quattro is rear-biased.
|
|
