Product Code Database
| Density | 0.926–0.940 gram/cubic centimetre |
| Young modulus/ E modulus/ Tensile modulus | 172–379 Mega- |
| Tensile strength(σt) | 12.4–19.3 Mega- |
| Elongation @ break | 100–150% |
| Brittleness, low temperature | −118 °Degree Celsius |
| Vicat | 99–124 °Degree Celsius |
| Specific heat (c) | 1.916 Kilo-joules/kilogram.Kelvin |
Medium-density polyethylene ( MDPE) is a type of polyethylene defined by a density range of 0.926–0.940 g/cm3. Polyethylene It is less dense than HDPE, which is more common.
MDPE can be produced by chromium/silica catalysts, Ziegler-Natta catalysts or metallocene catalysts. MDPE has good shock and drop resistance properties. It also is less notch sensitive than HDPE. Stress cracking resistance is better than that of HDPE. MDPE is typically used in gas pipes and fittings, sacks, shrink film, packaging film, carrier bags, and screw closures. Polyethylene Fittings - Medium Density Polyethylene (MDPE)
In the United Kingdom, black (or blue) MDPE is often used for water and waste water plumbing, and may also be referred to as 'black alkathene.'
|
|
