Product Code Database
A bookcase, or bookshelf, is a piece of furniture with horizontal shelves, often in a cabinetry, used to store or other printed materials. Bookcases are used in private homes, public and university libraries, offices, schools, and bookstores. Bookcases range from small, low models the height of a table to high models reaching up to ceiling height. Shelves may be fixed or adjustable to different positions in the case. In rooms entirely devoted to the storage of books, such as libraries, they may be permanently fixed to the walls and/or floor.
A bookcase may be fitted with glass doors that can be closed to protect the books from dust or moisture. Bookcase doors are almost always glazed with glass, so as to allow the spines of the books to be read. Especially valuable rare books may be kept in locked cases with wooden or glazed doors. A small bookshelf may also stand on some other piece of furniture, such as a desk or chest. Larger books are more likely to be kept in horizontal piles and very large books flat on wide shelves or on .
In Latin and Greek, the idea of bookcase is represented by Bibliotheca and Bibliothēkē (), derivatives of which mean library in many modern languages. A bookcase is also known as a bookshelf, bookstand, cupboard and bookrack. In a library, large bookshelves are called "stacks."
When books were written by hand and were not produced in great quantities, they were kept in small boxes or chests which owners (usually the wealthy aristocrats or clergy) carried with them. As manuscript volumes accumulated in or in homes of the wealthy, they were stored on shelves or in . These cupboards are the predecessors of today's bookcases. Later the doors were removed, and the evolution of the bookcase proceeded. Even then, however, the volumes were not arranged in the modern fashion. They were either placed in piles upon their sides, or if upright, were ranged with their backs to the wall and their edges outwards. The band of leather, vellum or parchment which closed the book was often used for the inscription of the title, which was thus on the fore-edge instead of on the spine. Titles were also commonly written onto the fore-edge.
It was not until the invention of printing had greatly reduced the cost of books, thus allowing many more people access to owning books, that it became the practice to write the title on the spine and shelve books with the spine outwards. (This was possible because the books were now in the form of a codex rather than a scroll.) Early bookcases were usually of oak, which is still deemed by some to be the most appropriate wood for an elegant library. The oldest bookcases in England are those in the Bodleian Library at Oxford University, which were placed in position in the last year or two of the sixteenth century; in that library are the earliest extant examples of shelved galleries over the flat wall-cases. Long ranges of book-shelves are somewhat severe in appearance, and many attempts have been made by means of carved cornices and pilasters to give them a less austere appearance. These attempts were most successful as in the hands of the English cabinetmakers of the second half of the eighteenth century.
In 1876, John Danner of Canton, Ohio, invented a revolving bookcase with a patented "pivot and post" design. The ingenuity of his work resided in the economy of space it provided. Thirty-two volumes of the American Cyclopedia could be stored in a compact space, and readily available for perusal at the touch of a finger. Danner's bookcase appeared in the 1894 Montgomery Ward catalog. In 1878 he exhibited his bookcases at the Paris International Exhibition and won a gold medal. The John Danner Manufacturing Company was known for honorable workmanship and affordability. The woods were oak, black walnut, western ash, and Philippine mahogany. Viewed as a progressive businessman, Danner was credited with drawing a large trade and business to the city of Canton.Kenney, Kimberly. Canton: A Journey Through Time, Arcadia Publishing, an imprint of Tempus Publishing, Inc., Charleston SC, Chicago, Portsmouth NH, San Francisco, 2003.
For libraries where space is extremely tight there is yet another system, usually called Mobile shelving. In such systems rows of bookcases are mounted on wheels and packed tightly together with only one or more aisles between them. It is possible then to visit only two bookcase sides at a time, all the others being pressed close together. A gearing mechanism allows users to move the bookcases and open the aisle in the desired location. Because of the danger of tripping on the floor-mounted rails or being crushed between bookcases, these systems may have electronic sensors and/or recessed track, or may be reserved for closed stacks where access is restricted.
They were, and are, also marketed as "extensible bookcases".
To help retain the books when being carried, a barrister's bookcase has glazed doors. As the shelves must still separate, the usual hinged doors opening sideways cannot be used; instead there is an "up and over" mechanism on each shelf, like an overhead door. The better quality cases use a metal scissor mechanism inside the shelves to ensure that the ends of the doors move in parallel without skewing and jamming. Many of this style, exported worldwide, were made by the Skandia Furniture Co. of Rockford, Illinois around the beginning of the 20th century.
This style of bookcase was either made in the period, or harkens back to the style of such times, so they are most commonly glazed with a leaded light and small panes of glass.
Each shelf of a true barrister's bookcase must be portable with a heavy load of books. The more robust examples have folding handles at the ends of each shelf. Modern "decorator" copies of these may look the same, but are often too lightly constructed to be carried whilst loaded, or may even be simply a single fixed case like a normal bookcase, but with separate doors to each shelf to give the appearance of a barrister's bookcase.
The book boxes or ("book presses" as they are sometimes called) were made of pine with backs and shelves, but no fronts. They were designed to be three-tiered, stacked on top of each other. When fully assembled, the boxes stood about 9 feet high. Each shelf had a different depth, however, ranging from 13 inches to 5.75 inches deep. The shelves had about ¾ inch on the front where boards could be nailed on for transportation.Schwarz, C. (March 18, 2020). Monticello's stacking bookcases: Thomas Jefferson's book boxes became the foundation of the Library of Congress. Popular Woodworking. Scrap paper was used to stuff between the books as a way of protecting them during their journey. When it was time to transport the books, the individual shelves could be removed then reassembled once they made it to their final location.
There is no documentation that Thomas Jefferson actually designed them himself, but the amount of detail that went into their construction suggests that they were his idea. There are no surviving original book boxes, but officials at Monticello were able to recreate six of these bookcases in 1959. This was achieved through experts compiling all written evidence of the book boxes as well as taking measurements of the remaining volumes from the Jefferson Library at the Library of Congress.
Designers and manufacturers
Both Chippendale and Thomas Sheraton made or designed many bookcases, mostly glazed with little lozenges encased in fretwork frames, often of great charm and elegance. In the eyes of some, the grace of some of Sheraton's satinwood bookcases has rarely been equalled. The French cabinetmakers of the same period were also highly successful with small ornamental cases. Mahogany, rosewood satinwood and even choicer exotic timbers were used; they were often inlaid with marquetry and mounted with chased and gilded bronze. Dwarf bookcases were frequently finished with a slab of choice marble at the top.
Library shelving
In the great public libraries of the twentieth century, multilevel Library stack often served as both structure and shelving, of iron, as in the British Museum where the shelves are covered with cowhide; or steel, as in the Library of Congress in Washington, D.C.; or of slate, as in the Fitzwilliam Library at Cambridge.
Systems of arrangement
There are three common ways of arranging stationary bookcases: flat against the wall; in stacks or ranges parallel to each other with merely enough space between to allow for the passage of a librarian; or in bays or alcoves, where cases jut out into the room at right angles to the wall-cases. The stack system is suitable only for public libraries where economy of space is essential; the bay system is not only handsome but utilizes the space to great advantage. The library of the City of London at the Guildhall is a peculiarly effective example of the bay arrangement.
Barrister's bookcase
A barrister requires the use of many law books and would formerly travel on circuit court with a judge's court. A specialised form of portable bookcase was developed to meet their needs. It consists of several separate shelf units that may be stacked together to form a cabinet. An additional plinth and hood complete the piece. When moving chambers, each shelf is carried separately without needing to remove its contents, and becomes a carrying-case full of books.
Thomas Jefferson's book boxes
Similar to the Barrister's bookcase is Thomas Jefferson's book boxes. When the British burned down the capitol in 1814, Congress went into negotiations with Thomas Jefferson to purchase his personal library of about 6,700 books. The book collection would be the foundation of the Library of Congress, and it had its own specially designed shelves designed to help transport the books with ease from Thomas Jefferson's home at Monticello.
Writing
Gallery
See also
Further reading
|
|
