This microphone gives you a robust sound with high gain before feedback thanks to its moving-coil dynamic element. It's also uni-directional so your microphone only picks up sounds that are directly in front it - The PDMIC58 features an XLR input, giving you the highest quality sound possible out of your vocal performances. With a durable zinc alloy metal construction and a steel mesh ball shaped grill, the PDMIC58 is built to last and can handle just about anything. Please note: Product does not have an on/off switch Comes with microphone and XLR-1/4inch cable. Click here for a larger image Uses XLR for high quality audio output Professional Moving Coil Dynamic Handheld Microphone The PDMIC58 is a professional moving coil dynamic handheld microphone. Translation: it makes your voice sound great, thanks the unidirectional element. The durable zinc alloy metal construction means this mic is great for everyday use. Sounds great in the studio or on the stage. Includes a 15 foot 5.5mm microphone cable. Perfect for On-Stage or Studio Use This microphone gives you a robust sound with high gain before feedback thanks to its moving-coil dynamic element. It’s also uni-directional so your microphone only picks up sounds that are directly in front it – that way your audio is reproduced without interference from instruments or speakers on stage. XLR Input for Professional Quality Sound The PDMIC58 features an XLR input, giving you the highest quality sound possible out of your vocal performances. Built to Handle Just About Anything With a durable zinc alloy metal construction and a steel mesh ball shaped grill, the PDMIC58 is built to last and can handle just about anything.
Very inexpensive compared to Shure SM58. It is not as good though, Shure has more bass output. The Shure build quality is better as well. Not hugely different, just not the same machining quality and timbre as the Shure product. The most important thing to know is that the microphone is wired internally unbalanced. The case is connected to pin 3 and 1, with the capsule wired to pin 1. So you absolutely need to cut the bridge between pin 1 and 3 and resolder t..