Product Code Database
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays
Fahrenheit and Celsius Display Can Be Choose Alarm When Temperature Exceeds the Limit or When Sensor Error 2 Relays, Switch Between Cooling and Heating Modes Control the Temperature by Setting the Temperature Set Value and the Difference Value Temperature Calibrating, Refrigerating control output delay protection Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor Cooling/Heating Mounting dimension: Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm Product Size：75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe) Technical Parameter: Output: 2 Relays Temperature Measuring Range: -50～210 oF / -50 oC-99 oC Resolution: 0.1 oF / 0.1 oC Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz Power Consumption: 3W ; Sensor: NTC Sensor Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC); Ambient Temperature: 0 oC-60 oC Storage Temperature: -30 oC-75 oC Relative Humidity: 20-85% (No Condensate) Package Content: 1x ITC-1000 Temperature controller 110v FAQ: 1. How to wire? Q: I can hear the relay inside the unit click, but I can't get any voltage on the cool or heat terminals. A: IMPORTENCE: Please don't forget to wire the Heating and Cooling device to Power supplier and make a circuit. 2. Q: The cooling device doesn't work, even though the temperature reaches TS DS, and the Cool indicator lamp is flashing. A: The cooling has delay function. If you want to run immediately and don't need the PT function, you can set PT=0.
|
|
