True DDC emulation-Support dual page DDC for compatible resolutions Supplies standard EDID information when no cloned information is available Installs in minutes -Easy and Compact design for installation and operation Power from USB connector or 5V power supply is required. The ConnectPRO HDMI DDC/EDID Ghosting Emulator is designed to solve the problem that computers can sometimes lose the Extended Display Identification Data (EDID). The DDC EDID data is vital for the video extension; it is a data structure provided by a computer display to describe its characteristics to a graphics card. However, when you switch or disconnect and then reconnect the displays such as the monitor, you may lose DDC EDID communication, and the user's computer then fails to display the image properly if at all. No longer will this be the case if you use ConnectPRO's HDMI DDC EDID Emulator module. The ConnectPRO DDC EDID Emulator allows the user to have best video image setting all the time. Through an easy programmed process, the display's DDC EDID is memorized in the DDC module, thus preventing our customers from blank screens and boot problems as well as resolving the issue of display resolution and color due to a lack of DDC EDID information. Also, the emulator is HDCP compatible and has a built in HDCP signal booster. Resolution is up to 1920 x 1200@60 Hz. Includes: HDMI Emulator, USB A-B Cable, HDMI Male-Male Cable, and Power Adapter (North America)
Perfect.I was running HDMI out from an iMac through an HDMI switcher, and every time I switched to a different output the screen would flash and have to re-acquire and re-configure the second display. This was causing major headaches with software we're using (ProPresenter 5), and even some serious terminal hacking with forced EDID overrides wasn't doing the trick.Plug this guy in and BOOM! Now the iMac thinks the second display is always the same dis..
