Product Code Database
   » » Barcode: 0015451409241
Tag Barcode '0015451409241'.
Tag
Mark as Favorite

Chicago Pneumatic CP734H 1/2-Inch Drive Heavy-Duty Air Impact Wrench
 (

EAN 0015451409241
REGISTERED: 09/11/24
UPDATED: 07/07/25
Chicago Pneumatic CP734H 1/2-Inch Drive Heavy-Duty Air Impact Wrench
Chicago Pneumatic CP734H 1/2-Inch Drive Heavy-Duty Air Impact Wrench


Specifications
  • Chicago Pneumatic CP734H 1/2-Inch Drive Heavy-Duty Air Impact Wrench available on November 06 2014 from Amazon for 190.75
  • UPC bar code 015451409241 ξ1 registered November 06 2014
  • Product category is Electronic
  • Manufacturered by Chicago Pneumatic
  • CP734H
  • # 32305

  • Product weight is 5.8 lbs.
  • Dyna-Pact oil bath clutch delivers smooth operation * One hand push-button forward/reverse * 4 positive power settings; full power in reverse * Handle exhaust directs air away from the workpiece and operator * CP Classic Tool- comes with a 2 year warranty standard!

References
    ^ Chicago Pneumatic CP734H 1/2-Inch Drive Heavy-Duty Air Impact Wrench, Chicago Pneumatic. Amazon. (revised Nov 2014)

Page 1 of 1
1
Blackstar Blackstar Blackstar Blackstar Blackstar

I like this wrench because its not too powerful so its a little easier on the hands, but it has enough power to do pretty much everything the $200-$300 wrenches can do. A lot of IR wrenches vibrate and are very clangy, while CP guns feel stable and the noise is muffled.
( )
Blackstar Blackstar Blackstar Blackstar Blackstar

Helpful? :: My father has had basically this same impact wrench since he was my age. They've changed the designation a little, but it's still the ol' CP734, and I KNOW I was using his 25 years ago (and it's still torquing). The thing I like about the CP is that it's light. Don't get me wrong, the Ingersoll-Rand Model 231 (also labeled as Matco and Snap-On, and probably a half dozen others) 1/2" impact is the industry standard, but you'll notice a REAL difference after about 4 tire rotations. The IR is h..
( )
Bluestar Bluestar Bluestar Bluestar Blackstar

I purchased this at the recommendation of a friend with the same model. I have a small IR compressor that spits out 5.3 CFM @ 40 psi and less at 90. Most of the wrenches needed more CFM but this one was on the low side. I am very happy to report that it gets the job done for me even with the low CFM. I am not using the gun @ NASCAR but for odd jobs around the house, it works fine. Could it work better with more CFM? Absolutely but if you use it in bursts, it works well. Construction is solid and it f..
( )

Account

Social:
Pages:  ..   .. 
Items:  .. 

Navigation

General: Atom Feed Atom Feed  .. 
Help:  ..   .. 
Category:  ..   .. 
Media:  ..   .. 
Posts:  ..   ..   .. 

Statistics

Page:  .. 
Summary:  .. 
1 Tags
2/10 Page Rank
6 Page Refs
3s Time
32 Sources