Product Code Database
Example Keywords: cap -ipod $37-145
barcode-scavenger
   » » Wiki: Carbonization
Tag Wiki 'Carbonization'.
Tag

Carbonization or carbonisation is the conversion of organic matters like plants and dead animal remains into through destructive distillation.


Complexity in carbonization
Carbonization is a reaction, therefore, is considered a complex process in which many reactions take place concurrently such as , condensation, hydrogen transfer and .

Carbonization differs from coalification in that it occurs much faster, due to its reaction rate being faster by many orders of magnitude.

For the final pyrolysis temperature, the amount of heat applied controls the degree of carbonization and the residual content of foreign elements. For example, at T ~ the carbon content of the residue exceeds a mass fraction of 90 wt.%, whereas at T ~ more than 99 wt.% carbon is found. Carbonization is often , which means that it could in principle be made self-sustaining and be used as a source of energy that does not produce ." Burying biomass to fight climate change" by Richard Lovett, , 3 May 2008, pp. 32-5. In the case of , the reaction releases about 237 per gram.

When is exposed to sudden searing heat (as in the case of a explosion or from a , for instance), it can be carbonized extremely quickly, turning it into solid carbon. In the destruction of by a volcano, many organic objects such as wooden furniture were carbonized by the intense heat.


How wood is transformed into charcoal
The carbonization of in an industrial setting usually requires a temperature above , which frees up energy and hence this reaction is said to be . This carbonization, which can also be seen as a spontaneous breakdown of the wood, continues until only the carbonised residue called remains. Unless further external heat is provided, the process stops and the temperature reaches a maximum of about . This charcoal, however, will still contain appreciable amounts of residue, together with the of the original wood.


Industrial safety in carbonization
Carbonization produces substances which can prove harmful and simple precautions should be taken to reduce risks.

The gas produced by carbonization has a high content of carbon monoxide which is poisonous when breathed. Therefore, when working around the kiln or pit during operation and when the kiln is opened for unloading, care must be taken that proper ventilation is provided to allow the carbon monoxide, which is also produced during unloading through spontaneous ignition of the hot fuel, to be dispersed.

The tars and smoke produced from carbonization, although not directly poisonous, may have long-term damaging effects on the respiratory system. Housing areas should, where possible, be located so that prevailing winds carry smoke from charcoal operations away from them and batteries of kilns should not be located in close proximity to housing areas.

Wood tars and pyroligneous acid can be irritant to skin and care should be taken to avoid prolonged skin contact by providing protective clothing and adopting working procedures which minimize exposure.

The tars and pyroligneous liquors can also seriously contaminate streams and affect drinking water supplies for humans and animals. Fish may also be adversely affected. Liquid effluents and waste water from medium and large scale charcoal operations should be trapped in large settling ponds and allowed to evaporate so that this water does not pass into the local drainage system and contaminate streams. Kilns and pits, as distinct from retorts and other sophisticated systems, do not normally produce liquid effluent - the by-products are mostly dispersed into the air as vapours. Precautions against airborne contamination of the environment are of greater importance in this case.


Carbonization and biodiesel fuels
In one study, Green chemistry: Biodiesel made with sugar catalyst Masakazu Toda, Atsushi Takagaki, Mai Okamura, Junko N. Kondo, Shigenobu Hayashi, Kazunari Domen and Michikazu Hara Nature 438, 178 (10 November 2005) Abstract carbonization was used to create a new for the generation of from and . The catalyst was created by carbonization of simple such as and . The sugars were processed for 15 hours at 400 °C under a nitrogen flow to a residue consisting of a complex mixture of polycyclic carbon sheets. This material was then treated with , which functionalized the sheets with , , and catalytic sites.


See also


External links

Page 1 of 1
1
Page 1 of 1
1

Account

Social:
Pages:  ..   .. 
Items:  .. 

Navigation

General: Atom Feed Atom Feed  .. 
Help:  ..   .. 
Category:  ..   .. 
Media:  ..   .. 
Posts:  ..   ..   .. 

Statistics

Page:  .. 
Summary:  .. 
1 Tags
10/10 Page Rank
5 Page Refs