At one time, the designers of X.400 were expecting it to be the predominant form of email, but this role has been taken by the SMTP-based Internet e-mail. Despite this, it has been widely used within organizations and was a core part of Microsoft Exchange Server until 2006; variants continue to be important in military and aviation contexts.
Developed in cooperation with the ISO, the X.400-series recommendations specify OSI standard protocols for exchanging and addressing electronic messages. The companion F.400-series of recommendations define Message Handling Services built on Message Handling Systems (MHS), as well as access to and from the MHS for public services. In the late 1990s, the ITU-T consolidated recommendations F.400 and X.400 and published the ITU-T F.400/X.400 (06/1999) recommendation "Message handling system and service overview".
The X.400-series recommendations define the technical aspects of the MHS: ITU-T Rec. X.402 | (ISO/IEC 10021-2) defines the overall system architecture of an MHS, ITU-T Rec. X.411 | (ISO/IEC 10021-4) defines the Message Transfer Service (MTS) and its functional component the Message Transfer Agent (MTA), and ITU-T Rec. X.413 | (ISO/IEC 10021-5) defines the Message Store. All ITU-T recommendations provide specific terms for descriptions of system entities and procedures. For example, messages (email) exchanged among people is referred to as Interpersonal Messaging (IPM); electronically structured business documents (e.g., invoices, purchase orders, dispatch advice, etc.) exchanged among trading partners’ computers fall under the EDI protocols.
As with most ISO standards dealing with application-level networking, X.400 failed to compete successfully with SMTP, the Internet-based equivalent in North America. However, in Europe, South America, and Asia, X.400 is quite widely implemented, especially for EDI services. In North America, X.400 is still used in some applications, such as the military, intelligence services and aviation, mainly because the X.400 functions for integrity and security were developed and deployed much earlier than their SMTP counterparts (S/MIME, PGP and SMTP-TLS). For similar reasons, it is sometimes used for transmission of EDI messages between applications.
Message handling is a distributed information processing task that integrates two related subtasks: message transfer and message storage. The ITU-T Recommendations define specific protocols for a wide range of communication tasks. For example, the P1 protocol is used explicitly for communication among MTAs, P3 between the e-mail client and an MTA, and P7 between the user agent and message store.
In the 1994 version, P7 was enhanced to provide folders in the message store, allow storage of submitted messages, and provide many automatic actions such as auto-foldering and correlation of replies, delivery reports and receipt notifications with submitted messages.
X.400 message content standards are defined for communication between user agents. These are modelled as conceptual protocols that treat P1 and P3/P7 as providing an underlying reliable transport of message contents. The message content standard for interpersonal messaging, IPM, defined in ITU-T Rec. X.420 | ISO/IEC 10021-7 was named P2 in the Red Book. The extended version of IPM in the Blue Book was given content-type 22 (for P2 version 2) and is often referred to informally as P22, although that term is not used in the standards. The message content standard for EDI is defined in ITU-T Rec. F.435 | ISO/IEC 10021-8 and ITU-T Rec. X.435 | ISO/IEC 10021-9, and informally referred to as P35. A voice messaging content type is defined in ITU-T Recs. F.440 and X.440.
Exchange Server 2007 does not use the MTA object, and the X.400 connector (which must use the MTA) is gone in Exchange Server 2007. There are no longer any X.400 default proxy e-mail addresses in Exchange Server 2007. How the Exchange Server 2007 Core Services Work Together
Important features of X.400 include structured addressing, ASN.1 binary encoding enabling multimedia content (predating and more efficient than MIME), and integrated security capabilities. As X.400 inter-domain relay services were assumed by ITU to be run by PTTs, X.400 incorporated fields for the automated transfer of messages between X.400 and other PTT services, such as teleprinter, fax and physical postal mail. ISO later added open routing standards (ITU-T Rec. X.412 | ISO/IEC 10021-10 and ITU-T Rec. X.404 | ISO/IEC 10021-11), but the initial misconception that X.400 required PTT relay services, coupled with PTT volume-based charges for these, were factors that inhibited the widespread uptake of X.400.
X.400 has been extended for use in military applications (see MMHS) and aviation (see AMHS).
An X.400 address consists of several elements, including:
1984 had two forms for address formats:
In the 1988 X.400 Recommendations, four forms of addressing were delineated. The 1984 Form 1, Variant 1 format was renamed as the mnemonic O/R address and the 1984 Form 1, Variant 3 and Form 2 format were combined and renamed the terminal O/R address. New forms introduced were the numeric O/R form (a variation of Form 1, Variant 2) and the postal O/R address.
The first large scale use was conducted in the U.S. under a military communication contract in 1992 to 1997.