Product Code Database
A piton (; also called pin or peg) in big wall climbing and in aid climbing is a metal spike (usually steel) that is driven into a crack or seam in the climbing surface using a climbing hammer, and which acts as an anchor for protecting the climber from falling or to assist progress in aid climbing. Pitons are equipped with an eye hole or a ring to which a carabiner is attached; the carabiner can then be directly or indirectly connected to a climbing rope.
Pitons were the original form of protection and are still used where there is no alternative. Repeated hammering and extraction of pitons damage the rock, and climbers who subscribe to the clean climbing ethic avoid their use as much as possible. With the popularization of clean climbing in the 1970s, pitons were largely replaced by faster and easier-to-use clean protection, such as nuts and camming devices. Pitons are still found in place (as "fixed" pitons) on some established free climbing routes, as fixed belay station anchors, in places where nuts or cams do not work; and are used on some hard aid climbs. (2006). 9781894765749, Rocky Mountain Books. ISBN 9781894765749
During the exploration of the hard granite in Yosemite Valley in the 1950s and 1960s, it was found that soft pitons did not work well. The long routes developed in Yosemite made it impractical and costly to fix routes, and the soft pitons were not durable enough to be placed and removed more than a few times. Pitons needed to be removed and used again on subsequent pitches, sometimes many times. Leaving gear in place went against the ethics of many climbers. John Salathé pioneered designs using hardened steel which were much tougher than the European pitons. Salathé's pins, which he developed for a climb of the Lost Arrow, resisted deformation and were easier to remove and reuse, and were durable enough to be reused indefinitely.
|
|
