Product Code Database
barcode-scavenger
   » » Barcode: 803983131149
Tag Barcode '803983131149'.
Tag
Mark as Favorite

Fluke Networks TS30 Telephone Test Set with Angled Bed-of-Nails Clips
 (

UPC 803983131149
REGISTERED: 08/21/18
UPDATED: 09/19/18
Fluke Networks TS30 Telephone Test Set with Angled Bed-of-Nails Clips
Fluke Networks TS30 Telephone Test Set with Angled Bed-of-Nails Clips


Specifications
  • Fluke Networks TS30 Telephone Test Set with Angled Bed-of-Nails Clips available on February 08 2015 from Amazon for 210.00
  • UPC bar code 803983131149 ξ1 registered February 08 2015
  • Product category is Electronic Network
  • Manufacturered by Fluke Networks
  • 30800009

  • Product weight is 1.05 lbs.
Detects dial tone and polarity, and places and receives calls during testing of telephone lines High impedance DataSafe operation in monitor mode DropSafe reliability passes 20-foot drop test RainSafe protection in severe weather conditions Mute switch, last number redial, and audible ringer for callbacks The Fluke Networks TS30 telephone test set, available with various line cord connectors to suit specific applications, detects dial tone and polarity; places and receives calls; monitors lines without disrupting service; and retains one 23-digit redial number for about eight minutes. It provides tone or pulse operation. A pair of LEDs on the front of the unit indicates line polarity when off hook. The test set passes a 20-foot (6 m) drop test and is Ingress Protection certified IP54 for protection against dust and splashed water. The keypad has 12 standard dialing keys including star and pound, and function keys to mute, check polarity, redial a number, and pause for accessing a second dial tone when dialing through a PBX (private branch exchange). A two-position switch allows selection of monitor mode for high-impedance monitoring without disrupting service, and talk mode for dialing and talking. The test set is made of high-impact polycarbonate that provides excellent insulating properties. Its contoured hand grip rests on the shoulder to enable hands-free operation. A spring-loaded belt clip at the base of the unit provides a secure hold on belt loops and D-rings. Additional specifications include various environmental operating conditions. Telephone test sets, also called butt sets, are used by telecom technicians to troubleshoot and maintain copper-wire voice-subscriber lines. Specifications
Line current range15 to 120 mA
DC resistance (talk mode)270 Ω (typical) at 20 mA
Monitor mode impedance120 kΩ , 300 to 3400 kHz
Rotary dial pulse rate10 or – 1 pulses per second
DTMF (dual-tone multi-frequency) tone frequency error or – 1.5% maximum
Voltage protection250 Vrms across the test leads
Memory capacityOne 23-digit redial number
Agency certifications and standards metCE (European Conformity) marking; Canadian Standards Association CAN/CSA-C22.2 No. 60950-1-03, CAN/CSA-C22.2 No. 1010.1-92, and CSA-C22.2 No. 1010.1B-97; UL/ANSI (Underwriters Laboratories/American National Standards Institute) 3111-1
Power sourceShared line power
Dimensions25.5 x 7.2 x 8.5 cm/10 x 2.83 x 3.34 in (H x W x D)
Weight0.476 kg/26.8 oz
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Datacom and telecom installation and test devices, such as toners and test sets, check cabling and wiring to help ensure proper connections and operation. Tone generator and probe sets, also called toners, are used to locate, trace, and isolate cables in copper media networks. Telephone test sets, also called butt sets, are specialized telephones that connect to telephone lines to check for proper operation and to isolate trouble. Some test sets incorporate a TDR (time-domain reflectometer) and toner for determining cable length and locating faults. While certain devices may be used on live networks, others are only suitable for inactive networks. Field technicians and installers use these devices to set up, maintain, and troubleshoot datacom and telecom cabling within a building or in outside plant (OSP) applications.What's in the Box?Fluke Networks TS30 test setTest leads with Angled Bed-of-Nails ClipsInstructions

References
    ^ Fluke Networks TS30 Telephone Test Set with Angled Bed-of-Nails Clips, Fluke Networks. Amazon. (revised Feb 2015)

Page 1 of 1
1

Account

Social:
Pages:  ..   .. 
Items:  .. 

Navigation

General: Atom Feed Atom Feed  .. 
Help:  ..   .. 
Category:  ..   .. 
Media:  ..   .. 
Posts:  ..   ..   .. 

Statistics

Page:  .. 
Summary:  .. 
1 Tags
10/10 Page Rank
18 Page Refs
5s Time
32 Sources