Ground loop isolator Close to perfect response of /- 0.03 dB from 2-20,000 Hz Utilizes proprietary audio transformers for a 1.3 dB gain Female 3.5-mm input Male 3.5-mm output Line out converter for factory radios with 2 to 50-watts per channel. Accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system.Product Features 50 watts maximum input per channel Linear 20 to 20,000Hz output based on input signal Transformer isolated for optimal sound and performance Maintains correct phasing Works with most factory installed radios
I have used other PAC connectors and peripherals for years. My experience with them has always been good and this did not disappoint either. I am using this in a boat to connect the rca to 3.5mm adapter to an RGB Led Controller. The rgb controller will listen to the music and make the lights flash to the beat. The problem came in when I tried to hook it up with the adapter cable. I was experiencing an earth loop and the lights would just ground through the radio an..