Product Code Database
barcode-scavenger
   » » Barcode: 0788581179796
Tag Barcode '0788581179796'.
Tag
Mark as Favorite

Redman CB 102 Inch CB Ham Radio Antenna Stain Steel Power Whip with Stud mount
 (

EAN 0788581179796
REGISTERED: 05/08/18
UPDATED: 07/27/21
Redman CB 102 Inch CB Ham Radio Antenna Stain Steel Power Whip with Stud mount
Rank: 6%
Blackstar Blackstar Blackstar Blackstar Blackstar
Redman CB 102 Inch CB Ham Radio Antenna Stain Steel Power Whip with Stud mount


Specifications
  • Redman CB 102 Inch CB Ham Radio Antenna Stain Steel Power Whip with Stud mount available on August 05 2014 from Amazon for 39.99
  • UPC bar code 788581179796 ξ1 registered August 05 2014
  • Product category is Electronic
  • Manufacturered by Redman Cb
  • 102 RM

  • Product weight is 36 lbs.
Made In USA for Redman Cb Stop !! CANNOT BE SHIPPED outside the LOWER 48 USA STATES ! MADE IN USA ! Not the Cheap Chinese Radio Shack Steel that Kinks after hitting a tree ! This 102'' whip antenna is made from the finest 17-7 ph tapered stainless steel which resists bending and kinking. This material is so tough it can be bent 180 degrees and will spring back to its original shape. Dissipation tip to reduce unwanted static buildup. Fits all 3/8 x 24 threaded mounts. Can be bent 180 degrees and will spring back to its original shape Resist bending and kinking Excellent for all off-road terrain This is a oversized package for shipping ( $$$ ) and will be sent inside a Plastic PVC Pipe. Comes with AS-1 stud with 3/8 x 24 threads

References
    ^ Redman CB 102 Inch CB Ham Radio Antenna Stain Steel Power Whip with Stud mount, Redman Cb. Amazon. (revised Aug 2014)

Page 1 of 1
1
Blackstar Blackstar Blackstar Blackstar Blackstar

I received this package today and it only had one whip and no stud mounts, and the tip is not balled down, its just a 102 inches of stainless steel....waste of money, oh and I ordered 2 of these but only got one
( )
Blackstar Blackstar Blackstar Blackstar Blackstar

using 102 inch whip in the past i did not like the set screws on the end of the whip does not stay tight had to replace them with hex screws whip is prone to sliping due vibration iv'e seen this design before when i worked for a cb shop quite a few years ago some of the other whip iv'e seen were spot welded so they didn't have this problem
( )

Account

Social:
Pages:  ..   .. 
Items:  .. 

Navigation

General: Atom Feed Atom Feed  .. 
Help:  ..   .. 
Category:  ..   .. 
Media:  ..   .. 
Posts:  ..   ..   .. 

Statistics

Page:  .. 
Summary:  .. 
1 Tags
2/10 Page Rank
24 Page Refs
4s Time
32 Sources