Ideal for bonding polystyrene plastic models and toys Dries clear Handling time: 10 minutes; Set time: 2 hours; Cure time: 24 hours Flammable, keep away from heat, sparks and open flame Tensile Strength: 300 PSI Devcon Duco Plastic and Model Cement is ideal for bonding polystyrene plastic models and toys. It is good to use removable tape on areas that you do not want the cement to get on. Before the cement cures, remove the tape. Flammable, keep away from heat, sparks and open flame. Dries clear, with a tensile strength of 300 PSI. Temperature Range: 200°F.
I would have preferred it if either they had different sized openings, like a small hole and if you wanted a bigger one, then you could just cut the opening to make it bigger. Or if there were nozzle attachments for precision placement of glue. I was trying to glue little warhammer guys together and with those little guys you really need to be careful so you don't get it all gushing out of the joints. The glue itself worked like glue, stuck the pieces together nice..