Product Code Database
   » » Barcode: 0701748716856
Tag Barcode '0701748716856'.
Mark as Favorite

Arduino Thermocouple Multiplexer Shield (K - MAX31855K)

EAN 0701748716856
REGISTERED: 05/08/18
UPDATED: 07/30/21
Arduino Thermocouple Multiplexer Shield (K - MAX31855K)

Arduino Thermocouple Multiplexer Shield (K - MAX31855K)

  • Arduino Thermocouple Multiplexer Shield (K - MAX31855K) available on February 21 2016 from Amazon for 62.95
  • UPC bar code 701748716856 ξ1 registered April 29 2015
  • Product category is Electronic
  • Manufacturered by, Inc.

The KTA-259v4 Thermocouple Multiplexer Shield is designed to easily allow multiple high temperature readings with an Arduino control board. With the new version there are multiple advantages over the old KTA-259, namely, wider temperature range including below 0°C, higher accuracy, higher resolution and ability to use more thermocouple types (dependent on model). Screw terminals are provided for thermocouple connections as thermocouple wires can not be soldered. Note: The v3 shield does not ship with Arduino headers, check the related products for suitable options. The board accepts both standard headers and R3 headers. KTA-259K K MAX31855K Measured Temperature Range: -200°C to 1350°C Thermocouple Maximum Temperature Range: -270°C to 1372°C You are buying the: KTA-259K (MAX31855K) Assembled and Tested Uses: Automotive Engine, Exhaust and Brake temperatures are higher than most temperature sensors can handle, but within the range of Thermocouples. Ovens, Furnaces and Kilns At temperatures where other temperature sensors will not operate. Freezer or Cryogenic monitoring Where temperatures are well below 0°C. Chemical Processes Where corrosive chemicals may damage probes or reach high temperatures thermocouples are more readily available for such processes. Multi-Zone Temperature Monitoring, Data Acquisition or Logging Systems With cheap readily available thermocouples.Features: Add up to 8 Thermocouples to an Arduino Cold Junction Compensated Output K, J, N, S, T, E or R Type thermocouples supported dependent on model 0.1 (2.54mm) Pitch Screw Terminals for Thermocouple connection 14-bit 0.25°C Resolution Nominal ±2°C Accuracy Based on MAX31855 Cold-Junction Compensated Thermocouple-to-Digital Converter and ADG608 Multiplexer IC 13 x 8 Prototyping Area with Analog and Power pins Chip Select Pin Jumper Selectable means multi SPI shield compatibility Combine with SD card shield for powerful Temperature Logging Powered from 3.3V Arduino Pin, 5V compatibleDownload datasheets here:

    ^ Arduino Thermocouple Multiplexer Shield (K - MAX31855K),, Inc.. Amazon. (revised Feb 2016)

Page 1 of 1
Blackstar Blackstar Blackstar Blackstar Blackstar

came as advertised
header pins would be a bonus if they where included
( )


Pages:  ..   .. 
Items:  .. 


General: Atom Feed Atom Feed  .. 
Help:  ..   .. 
Category:  ..   .. 
Media:  ..   .. 
Posts:  ..   ..   .. 


Page:  .. 
Summary:  .. 
1 Tags
2/10 Page Rank
102 Page Refs
4s Time
32 Sources