Agptek® Passive Infrared Occupancy Motion Sensor Wall Switch Dual Sensors (Pir sound) No Neutral Line Required Single Pole 3-way Auto On/off 110-270v 800w
This Wall Switch Occupancy Sensor, is designed to replace the normal ON/OFF wall switch. After the primary detector (PIR) senses presence and engages then microphonics (the sound detection system) comes into operation to keep the status of the detector as 'Occupied' even though there is no detected motion but if any sound . The controlled lights will remain ON until no motion/sound is detected and the pre-set lime-delay has expired Features: 1.Dual technology Sensors (Passive Infrared combined with microphonics) 2.Switch electronic ballasts Designer Wall Switch 3.Sound detection override Specifications: Single Pole (One Location) or Multi-Location Rate：120/277v ，60HZ Incandescent: 800W-6.67A@120V Fluorescent: 1200VA-10A@120V 2700VA-10A@277 Inductive Load: 1/4hp(185w)-5.8A@120V Minimum Load 10mA Compatible with electronic and magnetic ballasts, electronic and magnetic low-voltage ballasts, incandescent lamps and fans. NOTE:Sensor must detect motion using Passive Infrared(PIR)FIRSTLY and then microphonics(sound sensor)will engage to hear sounds that indicate continued occupancy. If PIR does not sense, sound alone will not operate the switch. Package Include: 1x Dual sensors wall witch 1x Installation instruction 1x package mounting accessories AGPtek is a registered trademark protected by the US Trademark Law. AGPtek products are sold by authorized sellers only.