This machine employs an USB port and thus can be connected to your laptop or desktop. By the support of included software, MoshiDraw, this machine can work well with multiple graphic formats including EMF/JPG/PLT/WMF. MoshiDraw has the ability of both NewlySeal and NewlyDraw and so it can be employeed in both carving and cutting works. This machine is suitable to seal engraving, advertisement, art gift, garment, leather, toy, building upholster, computerized embroidery, packing and printing, paper product, garments sampling, large width tailoring, shoemaking, furniture, industry, craftwork, nameplates decorations, woodcut and other industries. USB Port to Computer.MoshiDraw Software Included. MoshiDraw has the ability of both NewlySeal and NewlyDraw and so it can be employeed in both carving and cutting works. . Adopt Japan imported mainboard and chip which can control the engraving more precise. Adopt Germany imported bearing and high accuracy stepping belt which not only make the engraving more precise, also make the machine life time twice to three times than ordinary CO2 LASER Engraver. The reinforced and thickened machine body make transportation absolutely to be safer and longer life time. Built the heat dispersed fan to reduce all electronic component's temperature. Thus lengthen electronic component's life and the higher technical volatility. This brand new DC-KIII CO2 laser engraver is equipped with one 40W water cooling laser tube, high precise stepping motors, high quality control board.The Computerized Mini Laser Engraving and Cutting Machine is suitable for various materials, such as bamboo piece, double-color planks, boulder, horns, leather, crystal, wood, organic plastic, abrics, paper ,film, canvas , Acrylic and Plastics. If you want to make sure this laser engraver will engrave on a certain item or cut a certain item, you are welcome to send me a sample of that item and I will test it for you. Just email me for details. This CO2 laser engraver is equipped with one 40W water cooling laser tube, high precise stepping motors. It is suitable for various materials, such as bamboo piece, double-color planks,boulder,horns,leather,crystal, wood,organic plastic,abrics, paper, Acrylic and Plastics. Technical Parameters: Interface to Computer: USB Port Tube Trigger Volt: 20KV;Tube Operating Volt: 15KV Current:0~22mA Engraving Area: 260x180mm Maximum Item Size to Engrave: 10.25W x 8.75L x 2.85H in (260mm x 220mm x 70mm) Laser Tube (life hours): 1000-1300 Hours Laser Power: 40W Engraving Speed: 0-13.8 in./s (0-350mm/s) Cutting Speed: 0-1.38 in./s (0-35mm/s) Minimum Shaping Character: 0.04 X0.04in (1mm X 1mm) Resolution Ratio: 0.001 in (0.026mm) / (1000dpi) Resetting Positioning: 0.0004 in (0.01mm) Software Supported: MoshiDRAW software (both NewlyDraw and NewSeal function) Power Consumption: 250W Operating Temperature: 32-113F (0-45C) Recommended Spare Parts/Consumables: Laser Tube, Focal lens, Reflection lens Voltage: 110V~240V Frequecy: 50Hz~60Hz Feature: Adopt Germany imported bearing and high accuracy stepping belt. Adopt Japan imported mainboard and chip which can control the engraving more precise. Built the heat dispersed fan to reduce all electronic component's temperature.
Ok, I'll start this upfront with saying I am educated in engineering. But really there wasn't much super technical knowhow needed to make this thing into an AMAZING machine! I wish I could post pictures.When it arrived, I had to re-aim the mirrors (it has a large laser in the back of the machine that basically bounces off of mirrors that move back and fourth like a printer head.) There are three of these mirrors and thankfully they already have little adjustment..