Package Quantity: (1) Unit Style: Dual Gradient Length (Inch): 20 Outside Diameter (Inch): 4-1/2 Micron Rating: First Stage: 50 Micron; Second Stage: 5 Micron This Pentek DGD-5005-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.Specifications
I have a well for irrigation and filling the pool. The well water is super hard, stinky, and coats my cars when the irrigation runs. So much so it takes using a razor to the windows to clean it off.Using this keeps 90% of the hard water off of the cars, and keeps my pool from smelly funny. There is still a slight odor, but I am very sensitive to sulphur smells, and can barely smell it.I have to replace it every 2-3 months, and it comes out smelling and looking t..