Control on/off or brightness settings of Z-Wave enabled lights with the touch of a button * Provides direct control of up to 18 individual lights * Create and control up to 18 groups and 18 scenes * Compact ergonomic design for comfortable, one-hand operation * Receives notification that command has been received * Controls Entire Home With One Remote * Wireless * Z-wave
If the manual was well written this would be a five star review.This remote was added to an existing Z-Wave network that consisted of only Instamatic products. I'm guessing that most people will want to use this as a secondary remote due to the lack of an LCD display so I hope that I can save you some time. Once your existing master remote is set to transmit your network configuration, all you need to do on this remote is hold setup until the two LEDs blink and press 967. This was not clear in the manual..
I am using this remote as a secondary controller with a GE Simon XT alarm system as the master. The basic programming (adding a light) was simple. Making it a secondary controller took some "trial and error" due to a lack of clarity of the instructions.Now that I have it programmed, it works great! My only disappointment is that that batteries only last about a month under what I would consider minimal usage.By the way, I was successful in programming it a secondary controller by the using the programmin..
I bought this along with the 45602 module to control track lighting over my fireplace. I hardwired the track light to a male plug in the attic and plugged it into the module which was hardwired to a power source. Has no problem transmitting through the ceiling plaster. Also like the memory function for dimming to a preset level automatically when you turn it on.