4 Direct Contact heat pipes for seamless contact between the cooler and CPU 120mm wide range PWM fan. RPM can be fine tuned for maximum airflow or whisper quiet operation, Product Dimension - 5.2 x 2.9 x 6 inches Snap-on fan brackets to quickly and easily install, remove, clean, or replace the fan or heat sink Versatile all-in-one mounting solution supports Intel sockets: LGA 2011/1366/1156/1155/775/1150 and AMD sockets: FM2/FM1/AM3 /AM3/AM2 /AM2 The Cooler Master Hyper T4 is an affordable mainstream CPU cooler that delivers great cooling performance on all modern desktop processors thanks to its 4 specially shaped direct contact heat pipes. The T4's 120mm PWM fan features a wide speed range and can be fine tuned for maximum airflow and cooling performance or silent operation. A quick and easy Snap-On fan bracket and universal mounting system offer great flexibility, making the Hyper T4 a great match for any system.
i went with this over the D92 cooler for my skylake build because that one has 4 heatpipes and this one has 6.pros:- super quiet because it is so efficient the fan never even has to kick up.- direct contact COPPER hearpipes- price is very goodcons:-very tricky installation must use pliars to properly tighten the base screws otherwise it will not sit completely still.- decently heavy should not be travelling attached to your mobo or it will snap it.the metal fins co..
It was time to build myself a new PC and switch back to PC gaming from consoles, especially with the launching of next gen consoles. The machine will also be used for graphic design, rendering and encoding. Purchased the AMD FX-8350 with the intent of not overclocking it for now and stick with its stock heat sink and fan. For the first few weeks, the stock cooling ramped up on the RPM for fan speed when I played most games (ie. Bioshock: Infinite, Crysis 3, etc.), ..
I've recently built an AMD Athlon II 425-based computer (a certain regional electronics retailer well-known for their CPU/motherboard combos made an offer I could not refuse. What I paid for the CPU works out to less than forty dollars.) Naturally, and like most other people who choose to assemble their own PCs, I could not resist the allure of overclocking. Of course, stock cooling solutions are adequate for... well, cooling the CPU at stock settings. Since al..