upcScavenger
»
Barcode: 080596027490
»
BarcodeComment: Blade-cut-lock-mandrel-allow-dremel-538652786
Dremel EZ545 1-1/2-Inch EZ Lock Diamond Wheel (Tools & Home Improvement)
DREMEL 1-1/2" EZ Lockâ„¢ Diamond Wheel
DREMEL 1-1/2" EZ Lockâ„¢ Diamond Wheel Type: Rotary Tools Brand: DREMEL DREMEL 1-1/2" EZ Lockâ„¢ Diamond Wheel available on June 02 2017 from Newegg for 16.99
I had some tile already laid, and I needed to make a precision cut so I could breakup and remove a section of it. I ordered this diamond blade, along with the EZ402 EZ Lock Mandrel, because of its wider diameter. I thought the larger size would make it easier, and I was right. The blade worked fine. I've also used it to cut through two metal brackets.
The EZ Lock mandrel system is okay. It provides easier switching of blades and attachments. But it does allow some play in the position of the blade during cutting. The spring-loaded mandrel locks the blade from coming off the end of the post, but it does allow the blade to push down the post toward the motor. So when you're cutting, you just need to be careful not to twist the orientation of the dremel tool out of alignment with your cut. It was nothing that prevented me from doing the job.
The EZ Lock mandrel system is okay. It provides easier switching of blades and attachments. But it does allow some play in the position of the blade during cutting. The spring-loaded mandrel locks the blade from coming off the end of the post, but it does allow the blade to push down the post toward the motor. So when you're cutting, you just need to be careful not to twist the orientation of the dremel tool out of alignment with your cut. It was nothing that prevented me from doing the job.
|
| Topic Title | Summary | Views | |
|---|---|---|---|
| Author: S. Subervielle (Louisian.. | I had some tile already laid, and I needed to make a precision cut so I could breakup and remove a section of it. I ordered this diamond blade, along with the EZ402 EZ Lock Mandrel, because of its wider diameter. I thought the larger size would make it easier, and I was right. The blade worked fine. I've also used it to cut through two metal brackets.The EZ Lock mandrel system is okay. It provides easier switching of blades and attachments. But it does allow some play in the position of the blade during cutting. The spring-loaded mandrel locks the blade from coming off the end of the post, but it does allow the blade to push down the post toward the motor. So when you're cutting, you just need to be careful not to twist the orientation of the dremel tool out of alignment with your cut. It was nothing that prevented me from doing the job. | 3 | |
